- Designed in France for over 15 years
- Shipped from France
- French customer service
- Individuals & professionals
- Free 24H delivery from €100 · Pay in 10x
Complete Cutting & Cloning Pack Propagator XL + 5 SpectraLINE IP65 90cm + Timer + Ventilation Kit — BloomLED
Everything you need for successful cuttings, in one complete pack — Propagator XL tent 120×40×200cm, 5 SpectraLINE IP65 90cm bars, ventilation and timer included.
BloomLED reliability: designed in France, 10+ years of expertise in horticultural LED lighting, every component selected to maximise your cutting success rate.
Tent 120×40×200cm · 5× IP65 LED 90cm 30W · Timer · Profan ventilation kit
Probox Propagator XL 120 x 40 x 200 cm — Cloning & Germination Tent for 1440 Clones
Probox Propagator XL — A 120 × 40 × 200 cm tent purpose-built for high-density cloning: up to 1440 cuttings across 5 double shelves.
97% reflective mylar lining, patented steel frame, tear-resistant 420D nylon fabric, compatible with Garden HighPro Ledmaxpro LED bars. Shipped from France by BloomLED, indoor growing expert for over 10 years.
120 × 40 × 200 cm · 1440 clones · 97% Mylar · Patented steel frame · IP66-ready
SpectraLINE V2 LED Grow Light Bar 90 cm IP65 - 24 W - Seedlings, Cuttings & Young Plants
Stocky, sturdy seedlings with no stretching — 24 W of full spectrum spread across 90 cm, mounted just above your propagation trays, cuttings and young plants.
Selected and designed in France by BloomLED, LED horticultural lighting specialists for more than 10 years. 3-year warranty, replaced with new.
90 cm · 24 W · Full spectrum · IP65 · 50 000 h · Chainable
SpectraLINE IP65 V2 Linking Cable - 40 or 100 cm - Daisy-Chain LED Bars
Run several SpectraLINE V2 bars from a single power supply
A locking cable that clicks into place in seconds, with no tools and no electrical work. Designed in France by BloomLED, LED grow light specialists for over 10 years.
IP65 · 40 cm or 100 cm · Tool-free connection · SpectraLINE V2 compatible
24H Mechanical Timer 3680W for Grow Lights | BloomLED
Photoperiod control without electronics — switch your LED grow light in 15-minute steps across a 24-hour cycle, 18/6 in veg and 12/12 in bloom.
Selected by BloomLED, indoor growing experts for 10+ years: no battery, no calibration, auto-restart after a power cut.
24H cycle · 15 min segments · 3680 W / 16 A · EU Schuko plug
PROFAN Inline Duct Extractor - 125mm - 190m³/h
Ensure essential airflow with this compact PROFAN Inline 125mm extractor — Perfect for maintaining optimal air circulation in smaller grow tents and seedling areas.
Backed by BloomLED's 10+ years of expertise in indoor growing. Designed in France.
125mm Diameter · 190m³/h Airflow · Inline/Axial
125mm Combi Ducting (Alu/PVC) - 3m
Master your grow environment — The 125mm Combi Duct from BloomLED ensures efficient airflow without unwanted odors or heat escaping your grow space.
BloomLED trust: French expertise, 10+ years.
125mm Diameter · 3m Length · Alu/PVC · Double Layer · Odor/Heat Proof
Adjustable Stainless Steel Hose Clamp 25-175mm for Ducting
Ensure airtight, secure connections — essential for efficient indoor grow ventilation systems.
Designed with BloomLED's 10+ years of expertise for reliable performance.
Adjustable 25-175mm · Stainless Steel · Corrosion Resistant · Secure Fastening
Pack description
Propagator XL Cloning Pack — The All-in-One Kit for Successful Cuttings
This BloomLED cutting pack brings together every professional essential needed to successfully clone plants indoors, from day one through the transition to vegetative growth. The 120×40×200cm Probox Propagator XL tent provides an optimised space dedicated to cloning, equipped with 5 SpectraLINE IP65 90cm 30W LED bars perfectly suited to the high humidity levels required for cuttings, connected via 4 daisy-chain cables. The mechanical timer automates the photoperiod while the Profan ventilation kit ensures constant air renewal to prevent mould and stagnant air. Designed and hand-picked by BloomLED experts, this horticultural pack guarantees ideal conditions to maximise your cutting success rate.
| Specification | Detail |
|---|---|
| Grow tent | Probox Propagator XL 120×40×200cm — Mylar 600D |
| LED lighting | 5 × SpectraLINE IP65 90cm — 30W per bar — 150W total |
| Protection rating | IP65 — moisture and splash resistant |
| Wiring | 4 daisy-chain cables for serial connection |
| Timer | Mechanical 24h — 15-minute cycles |
| Ventilation | Profan Inline duct extractor — continuous air exchange |
| Light spectrum | Full spectrum optimised for cutting and vegetative stages |
| Recommended use | Cuttings, cloning, young plants, seedlings |
🌱 Propagator XL Tent Built for Cloning
The 120×40×200cm Probox Propagator XL is specifically designed for the cutting phase: the perfect height to install a cloning tray, a heated propagator and the LED bars, while preserving enough lateral space for daily care. 600D Mylar interior lining for high reflectivity, reinforced seams and mesh vent windows for healthy airflow.
💡 5× SpectraLINE IP65 — Perfect Light for Young Plants
The SpectraLINE IP65 90cm 30W LED bars deliver a full spectrum calibrated for the cloning phase and early vegetative growth. Their linear form factor guarantees even PPFD distribution over the entire tent surface, with no hotspots or underlit zones. The IP65 rating makes them fully compatible with the elevated humidity levels needed to maximise your cutting success rate.
🔌 Simple Daisy-Chain with 4 Connection Cables
The 4 included connection cables let you link the 5 SpectraLINE bars in series from a single mains socket. You reduce cable clutter, limit electrical risks and save valuable installation time. The chain also makes timer wiring straightforward for centralised photoperiod management.
⏰ Mechanical Timer — Automated Photoperiod
The included 24h mechanical timer handles your light cycles automatically (18h/6h recommended for cuttings). 15-minute precision, built-in backup memory for brief power outages, installs in seconds between the wall socket and the LED bars. No need to monitor switching — your cuttings enjoy a perfectly regular photoperiod.
💨 Profan Ventilation Kit — Continuously Fresh Air
The Profan Inline duct extractor included in the pack provides constant air renewal inside the tent. Essential for cutting propagation: it evacuates excess humidity, prevents mould from forming on young clones, regulates temperature and stimulates root development. Flow optimised for the Propagator XL volume, quiet enough for a home setup.
🇫🇷 Curated by BloomLED — Designed in France
Every component in this pack is hand-picked by the BloomLED team, premium growshop specialising in horticultural LED lighting for over 10 years. The SpectraLINE bars are designed in France and tested for durability. French-speaking technical support, tracked delivery and manufacturer warranty on all included LED hardware.
Absolutely. This pack was designed specifically to make the cutting phase as simple as possible. Every component is pre-selected and compatible: just assemble the Propagator XL tent, hang the 5 SpectraLINE bars using the daisy-chain cables, plug into the timer, then set up the Profan ventilation kit. No electrical expertise is required, and BloomLED support is always available to answer your questions.
How many cuttings can this pack accommodate at once?The 120×40×200cm Probox Propagator XL comfortably fits one to two standard cloning trays (e.g. two 77-cell trays), holding potentially more than 150 cuttings per batch. The 5 SpectraLINE IP65 90cm 30W bars deliver uniform PPFD across the full surface, guaranteeing even rooting without stressing the young plants.
Why pick IP65 LEDs rather than standard fixtures for cloning?Cloning requires high humidity (70 to 90%), which exposes luminaires to condensation and micro-droplets. SpectraLINE IP65 bars are certified dust-tight and splash-proof, eliminating any risk of short-circuit or premature degradation in these conditions. It is a guarantee of safety and longevity that is essential during the cutting stage.
Which photoperiod should I set on the timer for cuttings?To optimise cutting recovery, set the mechanical timer to an 18h on / 6h off cycle — the standard vegetative-phase photoperiod. This schedule supports foliar growth without triggering flowering and maximises the auxin production needed for root initiation. You can also try 20h/4h to accelerate recovery on slower-rooting varieties.
Is the Profan ventilation kit powerful enough for this tent volume?Yes, the Profan Inline extractor supplied in the pack is sized for the Probox Propagator XL volume (around 960 litres). It provides the air renewal needed to evacuate excess humidity and regulate temperature while maintaining a stable microclimate for cuttings. For use in a warm room (>26°C ambient), you can add an oscillating fan to circulate air internally.
A turnkey solution for professional cloning at home — Everything is included, nothing to add: tent, IP65 LEDs, wiring, timer and ventilation. Install, plug in, grow.
Pack content
Probox Propagator XL — A 120 × 40 × 200 cm tent purpose-built for high-density cloning: up to 1440 cuttings across 5 double shelves.
97% reflective mylar lining, patented steel frame, tear-resistant 420D nylon fabric, compatible with Garden HighPro Ledmaxpro LED bars. Shipped from France by BloomLED, indoor growing expert for over 10 years.
120 × 40 × 200 cm · 1440 clones · 97% Mylar · Patented steel frame · IP66-ready
Probox Propagator XL: the professional tent for large-scale cloning and germination
The Probox Propagator XL is the go-to tent for demanding growers who need to produce up to 1440 clones in a single run without compromising on quality. At 120 × 40 × 200 cm, this high-end propagation chamber combines a patented steel frame, 97% reflective mylar lining and five double shelves to extract value from every cubic centimetre. Curated and shipped by BloomLED, a French growshop with 10+ years of experience, it is designed for professional growers, nursery managers and serious hobbyists who run intensive cloning cycles.
Full technical specs
| Specification | Value |
|---|---|
| External dimensions | 120 × 40 × 200 cm |
| Usable volume | 0.96 m³ |
| Capacity | Up to 1440 clones |
| Shelves | 5 adjustable double shelves |
| Frame | Reinforced patented steel |
| Outer fabric | Tear-resistant 420D nylon |
| Inner lining | 97% reflective silver mylar |
| Doors | 2 front doors 55 × 190 cm |
| Air intakes | 2 × 30 × 20 cm |
| Exhaust ports | 3 × Ø 13.5 cm |
| Cable sockets | 4 × Ø 8 cm |
| Lighting compatible | Garden HighPro Ledmaxpro LED bars, IP66 |
Six key strengths of the Propagator XL
🌱 Record capacity: 1440 clones
Five double shelves let you propagate a huge batch in one go — a decisive space and time saver when you scale up mothers, seedlings or rooted cuttings.
💡 97% reflective silver mylar
The inner lining returns almost all PAR emitted by your LED bars. Your young plants receive an even, shadow-free light field, so roots form quickly and uniformly.
🏗️ Patented steel frame
Rock-solid stability and long service life: the reinforced frame handles the combined weight of shelves, LEDs and ventilation, even under heavy daily use.
🌬️ Full airflow control
Two lower air intakes, three upper exhaust ports and four Ø 8 cm cable sockets let you mount your extractor, intake fan and humidifier with zero fuss.
🔒 Complete lightproofing
Corrosion-resistant opaque zippers and 420D nylon fabric: no light leaks, so your strict propagation and vegetative photoperiods stay perfectly respected.
⚡ Garden HighPro LED ready
Dimensions sized for Ledmaxpro bars (10 W, propagation spectrum, IP66). The perfect combo to push success rates on clones and young plants to their maximum.
Frequently asked questions
With the five double shelves included, up to 1440 cuttings using 104-hole trays. Density stays optimal for airflow and root development without overcrowding.
Which LED lighting should I install for cloning and germination?We recommend Garden HighPro Ledmaxpro bars: 10 W each, dedicated propagation spectrum, IP66 rated. Plan for 2 to 3 bars per shelf depending on planting density.
Can this tent be used for vegetative growth afterwards?At 200 cm tall and 0.96 m³ of usable volume it is suitable for short veg runs. For full flowering cycles, pick a wider Probox Basic tent.
Which extractor fan should I choose for effective ventilation?The three Ø 13.5 cm ports fit 125 mm fans. A 200–280 m³/h extractor with carbon filter is ideal to control propagation humidity.
Is assembly complicated?The frame assembles without tools in 20–30 minutes thanks to the Quick Lock system from Garden HighPro. Illustrated manual included — two people recommended for fitting the cover.
Investing in the Probox Propagator XL means setting up for controlled, repeatable and profitable propagation — the decisive tool when mother quality and cycle consistency really matter.
Stocky, sturdy seedlings with no stretching — 24 W of full spectrum spread across 90 cm, mounted just above your propagation trays, cuttings and young plants.
Selected and designed in France by BloomLED, LED horticultural lighting specialists for more than 10 years. 3-year warranty, replaced with new.
90 cm · 24 W · Full spectrum · IP65 · 50 000 h · Chainable
SpectraLINE V2 90 cm LED grow light bar: the right light for strong young plants
A seedling that shoots up thin and pale, a cutting leaning hard towards the window, a young plant that is all stem and no leaf: nine times out of ten the seed is not the problem, the light is. The SpectraLINE V2 90 cm puts 24 W of full spectrum a few centimetres above your trays and turns fragile seedlings into compact, well-branched plants that are genuinely ready to pot on. It is the propagation bar BloomLED has been recommending to home growers and professional nurseries for more than 10 years, and the 90 cm format is the sweet spot for a standard shelf or a two-tray propagation station.
Technical specifications
| Specification | Value |
|---|---|
| Length | 90 cm (900 mm) |
| Power draw | 24 W (real consumption) |
| Spectrum | Full spectrum, optimised for germination and early growth |
| Ingress protection | IP65 (splash and humidity resistant) |
| Lifespan | 50 000 hours (approx. 7 years at 18 h/day) |
| Chassis | Premium aluminium, passive cooling, no fan |
| Power supply | Integrated EU mains cable, no external ballast |
| Coverage | Approximately 90 x 40 cm of intensive lighting |
| Chaining | Yes, via optional 40 or 100 cm link cable |
| Warranty | 3 years, replaced with new |
| Reference | BL-SPECTRAL-IP65-24W-90CM-V2 |
🌱 A spectrum built for the propagation stage
The SpectraLINE full spectrum covers the wavelengths photosynthesis actually uses at the seedling stage, with enough blue in the mix to keep etiolation under control. In practice that means short internodes, thick stems, dark green cotyledons and a root system that gets moving quickly. Unlike a generic white LED strip, the PAR output here is aimed at vegetative growth rather than at making a room look bright.
💧 IP65: greenhouse, cellar, utility room
Misting, closed humidity domes, a damp cellar in February, an unheated garage: the IP65 rating lets you mount the bar just a few centimetres above your trays without worrying about splashes or condensation. That is exactly what separates the V2 from ordinary indoor LED battens, which are not rated for the humidity levels a propagation area runs at.
🔗 Chainable to match your real growing area
One 90 cm bar covers roughly 90 x 40 cm intensively, which is two standard seed trays side by side. To light a full shelving unit, simply link several SpectraLINE bars end to end with the optional 40 or 100 cm link cables: one wall socket, no external ballast, no complicated wiring and no daisy chain of extension leads behind the rack.
🛠️ Set up in five minutes
The bar ships with its shelf mounting kit and an integrated EU mains cable. There is no separate driver to find a home for and nothing to assemble: fix the bar, plug it in, add a timer for the day/night cycle and you are growing. A hanging kit is available separately if you would rather suspend the bar over a bench or inside a grow tent.
⚡ 24 W that stay 24 W
Twenty-four watts of real draw is roughly the running cost of a bedside lamp, and the premium aluminium chassis dissipates heat passively so the diodes hold their output over the full 50 000 hour rating. No fan means no noise and nothing to clog with substrate dust. Over seven years at 18 hours a day, that is a grow light you fit once and then forget about.
How high above my seedlings should the SpectraLINE 90 cm sit?
Between 15 and 25 cm above the surface of the compost for seedlings and cuttings. If your seedlings still stretch, drop the bar a few centimetres closer; if the leaves pale, curl or look bleached, raise it slightly. The SpectraLINE runs very cool, so you can bring it close to the canopy without any risk of scorching tender growth.
How many hours a day should I run it?
16 to 18 hours a day gives the best results for seedlings and young plants. Plants need a genuine dark period to metabolise properly, so avoid running the light 24/7 even though it is tempting. A simple mechanical or digital timer automates the cycle, keeps the photoperiod consistent and means you never have to think about it again.
Is one bar enough, or should I chain several?
A single SpectraLINE 90 cm comfortably covers two standard seed trays, around 90 x 40 cm. For a wider bench or a multi-tier propagation shelf, plan on one bar per level and connect them with a link cable. If your shelf is deeper than about 45 cm, running two bars in parallel gives far more even coverage than pushing one bar higher.
Can I use it for more than seedlings and cuttings?
Yes. The full spectrum works well for supplementary lighting on herbs, salad leaves, microgreens and houseplants through the winter, and as a top-up light in a vegetative area. It is deliberately sized for propagation and early growth rather than for flowering, though, so for a full flowering cycle you will want a dedicated high-PPFD horticultural fixture instead.
The SpectraLINE has been the BloomLED reference for young plants since 2014. If your bar fails or fades within three years, we replace it with a new one, no argument. Our technical team grows indoors too and is on the phone if you need help sizing your setup.
Run several SpectraLINE V2 bars from a single power supply
A locking cable that clicks into place in seconds, with no tools and no electrical work. Designed in France by BloomLED, LED grow light specialists for over 10 years.
IP65 · 40 cm or 100 cm · Tool-free connection · SpectraLINE V2 compatible
SpectraLINE IP65 V2 Linking Cable: connect your LED bars in seconds
Own several SpectraLINE V2 bars but only one free socket? This BloomLED linking cable joins them into a single lit run powered by one driver. Available in 40 cm and 100 cm, it lets you build exactly the propagation rack, seedling bench or young-plant shelf your indoor grow needs.
| Specification | Value |
|---|---|
| Reference | CABLE-LIAISON-IP65-BMS |
| Available lengths | 40 cm or 100 cm |
| Ingress protection | IP65 |
| Compatibility | SpectraLINE IP65 V2 LED bars only |
| Connection type | Locking connector, no tools required |
| Purpose | Daisy-chaining bars on a single power supply |
| Price | From £8.90 inc. VAT |
🔗 One plug for the whole run
Link your SpectraLINE V2 bars together and power the entire line from a single socket. Fewer trailing leads, no extension blocks, and a noticeably cleaner and safer grow tent.
💧 Built for humid indoor growing
The IP65 rating shields the connection from splashes and the high humidity of a propagation area or greenhouse. The connector locks in place so watering never knocks it loose.
📏 40 cm or 100 cm to suit your rack
The 40 cm version bridges two bars sitting on the same shelf, while the 100 cm reaches from one tier to the next on a propagation rack. You match the cable to your setup, not the other way round.
Should I choose 40 cm or 100 cm?
Go for 40 cm to join two bars mounted end to end or side by side on the same tray, which is the usual layout for a seedling bench. Choose 100 cm as soon as a larger gap separates your bars, typically between two levels of a propagation shelf or across opposite sides of a rack.
Does it work with the original SpectraLINE bars?
No. This cable is made specifically for the SpectraLINE IP65 V2 generation and its dedicated connector, and it will not fit earlier versions, which use a different connection format. If you are unsure which generation you own, the BloomLED team can confirm it from the reference printed on your fixture.
An accessory under £10 that changes everything: a tidy install with no extension leads, and the freedom to grow your SpectraLINE run as your crops expand.
Photoperiod control without electronics — switch your LED grow light in 15-minute steps across a 24-hour cycle, 18/6 in veg and 12/12 in bloom.
Selected by BloomLED, indoor growing experts for 10+ years: no battery, no calibration, auto-restart after a power cut.
24H cycle · 15 min segments · 3680 W / 16 A · EU Schuko plug
24H Mechanical Timer 3680W: rock-solid photoperiod control for indoor growing
In indoor growing, a consistent day/night cycle matters as much as raw light output. This 24-hour mechanical timer switches your LED grow light on and off in 15-minute segments — no electronics, no backup battery, no clock drift. A simple, rugged solution hand-picked by BloomLED to lock in your vegetative and flowering photoperiods.
Technical specifications
| Specification | Value |
|---|---|
| Programming type | Analogue (mechanical) |
| Cycle | 24 hours, 96 segments of 15 min |
| Maximum load | 3680 W — 16 A / 230 V |
| Connection | EU Schuko plug, earthed |
| Switch | Always-on / Timer mode |
| Calibration | None required — ready to use |
| Reference | FLD-PRO-24H-MEC |
Why growers choose this timer
🌱 Stable photoperiod, consistent harvests
18/6 in veg, 12/12 in bloom: set the tappets once and the cycle repeats identically every single day. A steady photoperiod reduces light stress and the risk of plants reverting to vegetative growth.
⚡ 3680 W: from one panel to a full room
With 16 A of headroom, this timer drives a single horticultural LED panel just as happily as a power strip feeding several bars, an extraction fan or a nutrient pump. Just keep the combined draw under 3680 W.
🔧 Mechanical means unbreakable
No display, no backup cell, no menu to reprogram after a blackout — the dial simply resumes turning when mains power returns. That is the raw reliability growers want when a tent runs unattended for months.
BloomLED tip: keep the 'always-on' position for low-PPFD cloning stages, then switch back to timer mode as soon as plants enter vegetative growth. A photoperiod drift of more than 30 minutes is enough to unsettle sensitive flowering varieties.
Frequently asked questions
Is this timer suitable for an LED grow light with a driver?
Yes. LED drivers draw a brief inrush current at start-up that the 16 A contacts of this model absorb comfortably. For multi-driver builds exceeding 1500 W combined, BloomLED recommends adding a power contactor and using the timer purely as the pilot signal.
How do I set a 12/12 flowering photoperiod?
Push down the tappets covering your desired lights-on hours — for example 8 pm to 8 am — then rotate the dial until the arrow points at the real current time. Finally slide the side switch to the clock symbol. Each lowered tappet equals 15 minutes of light.
Ensure essential airflow with this compact PROFAN Inline 125mm extractor — Perfect for maintaining optimal air circulation in smaller grow tents and seedling areas.
Backed by BloomLED's 10+ years of expertise in indoor growing. Designed in France.
125mm Diameter · 190m³/h Airflow · Inline/Axial
At BloomLED, designed in France, we understand the critical role of climate control in achieving a thriving indoor garden. With over 10 years of expertise in horticultural LED lighting and indoor growing solutions, we've carefully selected the PROFAN Inline Duct Extractor to provide reliable and efficient ventilation for your plants. This compact and affordable unit is an essential component for any grower looking to manage temperature, humidity, and CO2 levels effectively, especially in smaller setups.
Why Choose the PROFAN Inline 125mm Extractor?
Proper air circulation is the bedrock of a successful indoor grow. The PROFAN Inline 125mm extractor, with its 190m³/h airflow capacity, is ideal for entry-level growers or for specific applications like ventilating propagation chambers or small grow tents. It efficiently removes stale, hot, and humid air, replacing it with fresh, CO2-rich air, which is vital for plant respiration and photosynthesis.
| Feature | Benefit for Your Grow |
|---|---|
| 125mm Diameter | Standard size for easy integration with most ducting and carbon filters, perfect for small to medium spaces. |
| 190m³/h Airflow | Provides sufficient air exchange for grow tents up to approximately 0.6m x 0.6m x 1.6m, ensuring optimal plant health. |
| Inline/Axial Design | Simple, compact, and easy to install directly into your ducting system, saving valuable grow space. |
| PROFAN Brand Quality | Reliable performance from a trusted name in horticultural equipment, ensuring consistent climate control. |
| Affordable Price (14.92€) | An excellent entry-level option for growers on a budget, without compromising on essential functionality. |
Technical Specifications at a Glance
This PROFAN extractor is engineered for straightforward, effective ventilation. Its compact design makes it a versatile choice for various indoor gardening setups.
Key Features for Optimal Grow Room Climate
Essential Air Exchange
Removes heat, humidity, and stale air, creating a healthier environment for your plants to thrive. Crucial for preventing mold and mildew.
Easy Installation
Designed for simple integration into any 125mm ducting system. Just plug and play for immediate climate improvement.
Compact & Lightweight
Its small footprint makes it perfect for tight spaces or as a supplementary fan in larger setups, without adding significant bulk.
BloomLED's Expert Advice: Pairing Your Extractor
To maximize the efficiency of your PROFAN Inline extractor, consider pairing it with a suitable carbon filter to neutralize odors, especially if you're growing aromatic plants. For more advanced setups or larger grow spaces, you might consider higher-capacity extractors like the Prima Klima ECblue 125mm - 680m³/h for superior performance and control. Remember, proper ventilation is key to preventing common grow room issues and ensuring robust plant growth.
BloomLED Tip: Regularly check your grow room temperature and humidity with a hygrometer. Adjust your extractor fan's operation to maintain ideal conditions for your specific plant cycle. Consistent airflow is more beneficial than intermittent bursts.
10+ Years of Expertise
Designed in France, trusted by growers worldwide.
At BloomLED, we are committed to providing high-quality, reliable indoor growing solutions. The PROFAN Inline 125mm extractor embodies our dedication to helping you achieve outstanding results, combining essential functionality with an accessible price point.
Frequently Asked Questions
How do I know if this 190m³/h extractor is powerful enough for my grow tent?To determine if the 190m³/h airflow is sufficient, calculate the volume of your grow tent (Length x Width x Height in meters). You ideally want to exchange the air in your tent at least once every 1-3 minutes. For example, a 0.6m x 0.6m x 1.6m tent has a volume of 0.576m³. Multiplying by 60 (minutes in an hour) gives you 34.56m³/h for one air change per minute. This 190m³/h fan is significantly more powerful, making it suitable for tents up to approximately 0.8m x 0.8m x 1.8m for optimal air exchange, or even larger for less demanding applications like seedling propagation.
Can I use this extractor with a carbon filter?Yes, absolutely! We highly recommend pairing this PROFAN 125mm extractor with a 125mm carbon filter to effectively remove odors from your grow space. Ensure the carbon filter's maximum airflow rating is equal to or slightly higher than the extractor's to maintain efficiency.
Master your grow environment — The 125mm Combi Duct from BloomLED ensures efficient airflow without unwanted odors or heat escaping your grow space.
BloomLED trust: French expertise, 10+ years.
125mm Diameter · 3m Length · Alu/PVC · Double Layer · Odor/Heat Proof
Essential Grow Room Ventilation
Unleash Odor-Free Growth with BloomLED's 125mm Combi Ducting
Tired of tell-tale odors or fluctuating temperatures impacting your indoor grow? BloomLED's 125mm Combi Ducting is your secret weapon for maintaining a perfectly controlled and discreet growing environment. Engineered with a robust double-layered construction, this essential ventilation component effectively seals in unwanted smells and heat, ensuring your plants thrive in optimal conditions while keeping your operation under wraps. With over a decade of French horticultural expertise, BloomLED brings you reliable solutions that make a real difference to your harvest.
Why Choose BloomLED's Combi Ducting?
Every successful indoor grow hinges on effective ventilation. Our 125mm Combi Duct stands out by offering a superior solution compared to standard ducting. The innovative combination of aluminum and PVC creates a formidable barrier against common grow room challenges. This isn't just a tube; it's an investment in the discretion and efficiency of your entire setup.
The inner aluminum layer provides excellent rigidity and heat reflection, while the outer PVC layer adds durability and acts as an additional seal, crucial for odor retention. This dual-layer design means less worry about your grow's footprint and more focus on cultivating healthy, vibrant plants.
Technical Specifications
| Feature | Detail |
|---|---|
| Diameter | 125mm (approx. 5 inches) |
| Length | 3 meters (approx. 9.8 feet) |
| Material | Aluminum (inner) / PVC (outer) |
| Construction | Double-layered |
| Color | Black (outer) |
| Application | Exhaust, intake, general ventilation |
| Compatibility | Fits all standard 125mm fans & filters |
Performance at a Glance
Odor Control
Excellent
Heat Containment
High
Durability
Robust
Flexibility
Good
Key Features That Set Us Apart
- ✅ Double-Layered Defense: Our unique aluminum/PVC construction provides an impenetrable barrier, preventing any unwanted odors or heat from escaping your grow space. Keep your cultivation discreet and your environment stable.
- 💨 Optimized Airflow: The smooth inner aluminum surface minimizes air resistance, ensuring your ventilation system operates at peak efficiency, moving air effectively without losing pressure.
- 🛠️ Easy Installation & Durability: Designed for hassle-free setup, this flexible yet robust ducting can be easily maneuvered and secured. Its durable construction ensures long-lasting performance in demanding grow room conditions.
Frequently Asked Questions
Combi ducting, with its double layer of aluminum and PVC, offers superior odor and heat containment compared to single-layer aluminum options. The outer PVC layer acts as an extra barrier against smells and light, making it ideal for discreet grow operations where environmental control is paramount.
Is this ducting compatible with all 125mm fans and filters?Yes, our 125mm Combi Ducting is designed to be universally compatible with all standard 125mm (5-inch) inline fans, carbon filters, and other ventilation accessories. Its flexible nature allows for easy connection and secure fitting with appropriate clamps.
At BloomLED, we've been empowering growers for over a decade. Our passion for horticulture, combined with our deep technical expertise, ensures that every product we offer meets the highest standards of quality and performance. Trust in BloomLED for premium growing solutions.
Ensure airtight, secure connections — essential for efficient indoor grow ventilation systems.
Designed with BloomLED's 10+ years of expertise for reliable performance.
Adjustable 25-175mm · Stainless Steel · Corrosion Resistant · Secure Fastening
Achieve perfect airflow and maintain optimal climate control in your grow space with the BloomLED Adjustable Stainless Steel Hose Clamp 25-175mm. This essential ventilation accessory ensures your ducting connections are not just secure, but also airtight and long-lasting, preventing costly air leaks and ensuring your extraction system operates at peak efficiency.
Why a Reliable Hose Clamp is Crucial for Your Indoor Grow
In the world of indoor growing, every detail matters. From the quality of your lights to the precision of your nutrient delivery, maintaining an optimal environment is key to healthy plants and abundant yields. Your ventilation system plays a critical role in this, removing stale air, excess heat, and humidity. A robust and reliable hose clamp is the unsung hero that ensures your entire system functions flawlessly.
Without secure connections, your ducting can sag, disconnect, or leak air, leading to:
- Reduced airflow efficiency
- Increased energy consumption
- Poor temperature and humidity control
- Potential odors escaping your grow space
- Compromised plant health and growth
The BloomLED Adjustable Hose Clamp is engineered to eliminate these concerns, providing a steadfast grip that withstands the demands of continuous operation.
Key Features of the BloomLED Adjustable Hose Clamp
Universal Adjustable Diameter (25-175mm)
Our hose clamp offers an incredibly versatile adjustment range, perfectly accommodating a wide variety of ducting sizes commonly used in indoor growing setups. From smaller 25mm (1 inch) ducts to larger 175mm (7 inch) systems, this single clamp provides a secure fit, reducing the need for multiple specialized clamps. This flexibility makes it an ideal choice for growers with varying equipment or those looking to upgrade their systems in the future.
Premium Stainless Steel Construction
Crafted from high-grade stainless steel, this clamp is built to endure. Unlike standard steel or plastic alternatives, stainless steel offers superior resistance to rust, corrosion, and degradation, even in the humid and often warm conditions of an indoor grow room. This ensures a prolonged lifespan for the clamp and consistent performance of your ventilation system, protecting your investment and your plants.
Secure & Easy Fastening Mechanism
Designed for both strength and ease of use, the robust screw-tightening mechanism allows for quick and secure installation. Simply position the clamp, tighten the screw with a screwdriver, and achieve a firm, airtight seal around your ducting. The reliable grip prevents slippage and accidental disconnections, giving you peace of mind that your ventilation system is operating safely and effectively.
Technical Specifications
| Feature | Detail |
|---|---|
| Material | Stainless Steel |
| Adjustable Diameter | 25mm - 175mm |
| Corrosion Resistance | Yes |
| Fastening Type | Screw Mechanism |
| Application | Duct Extraction Systems, Ventilation |
| Tier | Tier 1 Accessory |
Frequently Asked Questions (FAQs)
To find the correct size, measure the outer diameter of your ventilation duct. Our adjustable clamp range of 25-175mm means it will fit ducts with any outer diameter within this range. Simply choose the clamp that encompasses your duct's measurement, and then tighten it to secure.
Can this clamp be reused or repositioned?Yes, absolutely! The BloomLED Adjustable Stainless Steel Hose Clamp is designed for durability and flexibility. It can be easily loosened, repositioned, or even removed and reused on different ducting without compromising its integrity or fastening power, making it a sustainable and cost-effective choice for your grow setup.
BloomLED: Your Partner in Indoor Growing Excellence
Designed in France with over 10 years of expertise, BloomLED is more than just a supplier; we are passionate growers committed to providing premium, reliable equipment. Our Adjustable Stainless Steel Hose Clamp 25-175mm embodies our dedication to quality and performance, ensuring every component of your grow system contributes to your success.
Premium Quality
10+ Years Expertise
Dedicated SupportRelated Products to Enhance Your Ventilation System
Everything you need for successful cuttings, in one complete pack — Propagator XL tent 120×40×200cm, 5 SpectraLINE IP65 90cm bars, ventilation and timer included.
BloomLED reliability: designed in France, 10+ years of expertise in horticultural LED lighting, every component selected to maximise your cutting success rate.
Tent 120×40×200cm · 5× IP65 LED 90cm 30W · Timer · Profan ventilation kit