- Designed in France for over 15 years
- Shipped from France
- French customer service
- Individuals & professionals
- Free 24H delivery from €100 · Pay in 10x
Complete Cutting Pack Probox Propagator M · 2 SpectraLINE IP65 60cm V2 · Timer · 4 Rootit Kits — BloomLED
The turnkey cutting solution to start young plants with total confidence. — Probox Propagator M 80×60×40cm grow tent, 2 SpectraLINE IP65 60cm V2 LED bars, 24h mechanical timer and 4 Rootit cutting kits (96 cubes) shipped together.
Trust: pack curated by BloomLED expertise, growshop brand designed in France, horticultural lighting specialist for over 10 years.
Tent 80×60×40cm · 2× SpectraLINE IP65 60cm 20W · 24h timer · 96 Rootit cubes · Full-spectrum for cuttings
Probox Propagator M 80 x 60 x 40 cm - Compact Grow Chamber for Seedlings and Cuttings | BloomLED
Give your seedlings and cuttings the perfect start — Compact 80 x 60 x 40 cm propagation chamber for fast, healthy rooting.
BloomLED confidence: curated by our growshop experts in France with 10+ years supporting indoor cultivation.
80 x 60 x 40 cm · Reflective mylar lining · Optimized airflow · Heavy-duty zipper
24H Mechanical Timer 3680W for Grow Lights | BloomLED
Photoperiod control without electronics — switch your LED grow light in 15-minute steps across a 24-hour cycle, 18/6 in veg and 12/12 in bloom.
Selected by BloomLED, indoor growing experts for 10+ years: no battery, no calibration, auto-restart after a power cut.
24H cycle · 15 min segments · 3680 W / 16 A · EU Schuko plug
Complete Rootit Cutting Kit – Propagator + 24 Cubes + Gel + Scalpel | BloomLED
Everything you need to take cuttings, in one box — propagator, Rootit cubes, rooting gel and scalpel, ready to use.
Curated and designed in France by BloomLED, indoor growing experts for over 10 years.
Domed propagator · 24 Rootit cubes · Rooting gel · Sterile scalpel
- This product is not available for order.
SpectraLINE V2 LED Grow Bar 60cm IP65 - 18W - Seedlings, Cuttings and Young Plants
Stocky, vigorous seedlings instead of leggy ones — 18W of full-spectrum light spread across 60cm, mounted just above your propagation trays, cuttings and young plants.
Specified in France by BloomLED, horticultural LED lighting experts for over 10 years. 3-year warranty with brand-new replacement.
60cm · 18W · Full spectrum · IP65 · 50,000h · Daisy-chainable
SpectraLINE IP65 V2 Linking Cable - 40 or 100 cm - Daisy-Chain LED Bars
Run several SpectraLINE V2 bars from a single power supply
A locking cable that clicks into place in seconds, with no tools and no electrical work. Designed in France by BloomLED, LED grow light specialists for over 10 years.
IP65 · 40 cm or 100 cm · Tool-free connection · SpectraLINE V2 compatible
One of product is no longer available. This pack cant be purchased
Pack description
Probox Propagator M Complete Cutting Pack: a no-compromise start for your cuttings
This BloomLED horticultural pack bundles everything you need to succeed with cuttings and seedlings indoor, from the first root to transplant-ready young plants. Probox Propagator M grow tent, two SpectraLINE IP65 60cm V2 LED bars, mechanical timer and four Rootit cutting kits: a coherent ecosystem, delivered ready to use.
What's inside this LED cutting pack
Designed for growers who want to set up a performant cutting space without juggling separate purchases, this kit covers every essential need of successful propagation:
| Component | Role | Specification |
|---|---|---|
| Probox Propagator M tent | Stable, reflective environment | 80 × 60 × 40 cm — Mylar fabric |
| 2× SpectraLINE IP65 60cm V2 LED bar | Full-spectrum horticultural lighting | 20 W each — IP65 waterproof |
| SpectraLINE linking cable | Series chaining of the bars | Proprietary SpectraLINE plug |
| 24h mechanical timer | Lighting cycle automation | 15 min increments — 230V |
| 4× Rootit cutting kit | Ready-to-use rooting substrate | 96 cubes total (4 × 24) |
An ecosystem built for cuttings and young plants
Propagation is often the trickiest phase of any indoor grow cycle. Too much light scorches young tissues, too little limits rooting. SpectraLINE IP65 60cm V2 bars deliver PAR calibrated for germination, cutting and the first weeks of growth, with no thermal stress.
The Probox Propagator M's reflective fabric spreads light evenly across the cultivation surface, removing shadow zones and encouraging uniform rooting. Thanks to IP65 certification, the bars handle the high humidity typical of a cutting setup — a real asset when you mist your clones several times a day.
🌱 Cuttings ready out of the box
96 Rootit cubes included: start immediately without hunting for extra substrate. pH is pre-stabilized for fast rooting.
💡 Full spectrum for young plants
SpectraLINE V2 bars deliver a balanced spectrum that sustains photosynthesis without burning fragile clone tissues.
💧 IP65 = water and humidity handled
Mist your clones with peace of mind. The bars are waterproof to splash, making them ideal for high-hygrometry propagation environments.
⏱️ Automated lighting cycle
The 24h mechanical timer easily drives 18/6 or 20/4 cycles, with no complex setup and no dependency on a mobile app.
📐 Compact 80×60×40cm format
The Probox Propagator M fits in a cupboard, basement or laundry corner. Ideal for small surfaces or apartment growers.
🔧 Simple chaining
The included linking cable connects both SpectraLINE bars in series: one wall plug, installation in minutes.
Who is this pack designed for?
This BloomLED horticultural pack is aimed at indoor gardeners who want to propagate dozens of cuttings at once, seeding enthusiasts preparing vegetable starts before transplanting outside, and experienced growers who want to dedicate a specific space to propagation. It's also an excellent starting point for those beginning indoor cultivation with reliable, tested, complete gear.
The BloomLED choice: every component of this pack has been selected and tested by our team. No random bundling — this is a real ecosystem thought out for indoor cutting and young plants.
Frequently asked questions about the Probox Propagator M Pack
The 4 Rootit kits provide 96 cubes in total. With the 80 × 60 cm surface, you can run between 60 and 96 cuttings at once depending on spacing. For bulkier semi-woody cuttings, plan for lower density.
Are the SpectraLINE IP65 bars enough for flowering?This pack is optimized for cuttings, seeding and young plants. For flowering which demands higher PAR, we recommend adding a dedicated grow light or moving to another cultivation space. SpectraLINE excels at early stages.
Is the mechanical timer accurate?Yes, the 15-minute increments suit classic horticultural cycles (18/6, 20/4, 16/8). It offers robustness, no software bugs and no need for a mobile app. After a long power outage, it resumes at the correct time once power returns.
Does the Mylar fabric withstand the high humidity of cutting?Yes, the Probox Propagator M's inner Mylar fabric is designed to handle high hygrometry while remaining reflective. Combined with IP65 bars, you can mist clones without worry.
Can I add more SpectraLINE bars later?Absolutely. The SpectraLINE system is modular: you can chain several bars on the same plug depending on total length. If you want to scale up, our Propagator XL Pack with 5 SpectraLINE is a natural evolution.
Pack content
Give your seedlings and cuttings the perfect start — Compact 80 x 60 x 40 cm propagation chamber for fast, healthy rooting.
BloomLED confidence: curated by our growshop experts in France with 10+ years supporting indoor cultivation.
80 x 60 x 40 cm · Reflective mylar lining · Optimized airflow · Heavy-duty zipper
Probox Propagator M: the compact grow chamber built for seedlings and cuttings
The Probox Propagator M is a dedicated mini grow chamber for propagation — seedlings, cuttings and young plants. Its 80 x 60 x 40 cm footprint makes it a discreet, efficient tool that fits anywhere, from a shelf in your apartment to a corner of the garage. BloomLED selected this Garden HighPro model for its ultra-reflective mylar lining, reinforced frame and optimized ventilation — everything you need to nail indoor propagation, even in winter.
| Feature | Detail |
|---|---|
| Dimensions | 80 x 60 x 40 cm (L x W x H) |
| Use | Seedlings, cuttings, young plants, propagation |
| Inner lining | 100% reflective mylar |
| Structure | Reinforced metal poles + connectors |
| Ventilation | Mesh vents + cable sock ports |
🌱 Propagation success from day one
A format designed for seedlings, cuttings and young plants. The 40 cm ceiling keeps light and warmth close to the plantlets for fast sprouting and vigorous rooting.
✨ Ultra-reflective mylar lining
The inner mylar surface bounces up to 95% of the light back onto your plants. You make every watt of your propagation lamp count — LED, fluorescent or CFL.
📐 Compact and discreet
80 x 60 x 40 cm: slots onto a shelf, worktop or closet. Perfect for apartment growers starting indoor cultivation without dedicating a full room.
🔧 Fast and solid assembly
Clip-together metal poles and a heavy-duty zipper canvas. You build it in 10 minutes, tool-free, and it stays rock steady through every propagation cycle.
For cuttings and seedlings, opt for a 20-60 W propagation LED or a 2700-6500 K CFL. The 40 cm height is ideal to keep the lamp close to the plants without scorching foliage.
How many plants fit inside the Propagator M?You can start up to 40-60 cuttings in a 60 x 40 cm tray, or 1-2 standard seedling trays. A great stepping stone before moving into a larger grow tent.
Do I need extra ventilation?The side mesh vents are enough for passive propagation. To accelerate growth and avoid stagnant humidity, add a small 100 mm inline fan or a USB clip fan.
Give your seedlings and cuttings a stable, bright, discreet environment — the foundation of every successful indoor grow.
Photoperiod control without electronics — switch your LED grow light in 15-minute steps across a 24-hour cycle, 18/6 in veg and 12/12 in bloom.
Selected by BloomLED, indoor growing experts for 10+ years: no battery, no calibration, auto-restart after a power cut.
24H cycle · 15 min segments · 3680 W / 16 A · EU Schuko plug
24H Mechanical Timer 3680W: rock-solid photoperiod control for indoor growing
In indoor growing, a consistent day/night cycle matters as much as raw light output. This 24-hour mechanical timer switches your LED grow light on and off in 15-minute segments — no electronics, no backup battery, no clock drift. A simple, rugged solution hand-picked by BloomLED to lock in your vegetative and flowering photoperiods.
Technical specifications
| Specification | Value |
|---|---|
| Programming type | Analogue (mechanical) |
| Cycle | 24 hours, 96 segments of 15 min |
| Maximum load | 3680 W — 16 A / 230 V |
| Connection | EU Schuko plug, earthed |
| Switch | Always-on / Timer mode |
| Calibration | None required — ready to use |
| Reference | FLD-PRO-24H-MEC |
Why growers choose this timer
🌱 Stable photoperiod, consistent harvests
18/6 in veg, 12/12 in bloom: set the tappets once and the cycle repeats identically every single day. A steady photoperiod reduces light stress and the risk of plants reverting to vegetative growth.
⚡ 3680 W: from one panel to a full room
With 16 A of headroom, this timer drives a single horticultural LED panel just as happily as a power strip feeding several bars, an extraction fan or a nutrient pump. Just keep the combined draw under 3680 W.
🔧 Mechanical means unbreakable
No display, no backup cell, no menu to reprogram after a blackout — the dial simply resumes turning when mains power returns. That is the raw reliability growers want when a tent runs unattended for months.
BloomLED tip: keep the 'always-on' position for low-PPFD cloning stages, then switch back to timer mode as soon as plants enter vegetative growth. A photoperiod drift of more than 30 minutes is enough to unsettle sensitive flowering varieties.
Frequently asked questions
Is this timer suitable for an LED grow light with a driver?
Yes. LED drivers draw a brief inrush current at start-up that the 16 A contacts of this model absorb comfortably. For multi-driver builds exceeding 1500 W combined, BloomLED recommends adding a power contactor and using the timer purely as the pilot signal.
How do I set a 12/12 flowering photoperiod?
Push down the tappets covering your desired lights-on hours — for example 8 pm to 8 am — then rotate the dial until the arrow points at the real current time. Finally slide the side switch to the clock symbol. Each lowered tappet equals 15 minutes of light.
Everything you need to take cuttings, in one box — propagator, Rootit cubes, rooting gel and scalpel, ready to use.
Curated and designed in France by BloomLED, indoor growing experts for over 10 years.
Domed propagator · 24 Rootit cubes · Rooting gel · Sterile scalpel
Complete Rootit cutting kit: hassle-free indoor propagation
Want to multiply your favourite plants without buying ten separate products? This Rootit cutting kit gathers the essentials in a single box: a domed mini propagator to hold humidity, 24 Rootit rooting cubes, a rooting gel and a sterile scalpel. A complete solution put together by BloomLED so you can start your cuttings today, from the first snip to the first roots.
| Item | Role in the kit |
|---|---|
| Domed mini propagator | Keeps humidity high and stable around the cuttings |
| 24 Rootit cubes | Airy rooting medium, ready to hold each stem |
| Rooting gel | Seals the cut and stimulates root formation |
| Sterile scalpel | Clean, precise cut to limit stress and disease |
| Use | Cuttings, cloning and starting young plants indoors |
🌱 A propagator that holds humidity
The clear dome creates the humid microclimate cuttings need. With no roots yet, young stems lose less moisture and stay firm while they establish.
💧 Rootit cubes + rooting gel
The 24 Rootit cubes provide an airy medium that holds water without drowning the stem. Combined with the rooting gel, they seal the cut and encourage fast, even root growth.
✂️ A scalpel for clean cuts
A clean, sterile cut lowers the risk of infection and speeds up healing. The included scalpel ensures a precise snip on the mother plant for vigorous cuttings.
Yes. Everything is included and ready to use: take a cutting, dip the stem in the gel, place it in a moistened cube, then close the propagator. It is one of the easiest ways to start taking cuttings indoors.
Do I need extra lighting?Gentle light helps rooting. The kit does not include a lamp: for best results, pair it with a low-power horticultural LED bar, ideal for young cuttings and seedlings.
The most complete kit to get started: everything to go from mother plant to young roots, with nothing else to buy.
Stocky, vigorous seedlings instead of leggy ones — 18W of full-spectrum light spread across 60cm, mounted just above your propagation trays, cuttings and young plants.
Specified in France by BloomLED, horticultural LED lighting experts for over 10 years. 3-year warranty with brand-new replacement.
60cm · 18W · Full spectrum · IP65 · 50,000h · Daisy-chainable
SpectraLINE V2 60cm LED Grow Bar: the right light for young plants
A seedling stretching towards the window, a cutting that grows tall and thin instead of bushy, a young plant that is all stem and no leaf: nine times out of ten the seed is fine, the light is not. The SpectraLINE V2 60cm delivers 18W of full-spectrum light a few centimetres above your trays and turns fragile plugs into compact, well-branched plants ready for potting on. It is the grow bar BloomLED has recommended to home growers and professionals for more than a decade.
Technical specifications
| Specification | Value |
|---|---|
| Length | 60 cm (600 mm) |
| Power draw | 18 W |
| Spectrum | Full spectrum, tuned for germination and vegetative growth |
| Ingress protection | IP65 (water and humidity resistant) |
| Lifespan | 50,000 hours (approx. 7 years at 18 h/day) |
| Housing | Premium aluminium, passive heat dissipation |
| Power supply | Integrated mains cable with EU plug, no external driver |
| Coverage | Approx. 60 x 40 cm at intensive light levels |
| Daisy-chaining | Yes, via optional 40 or 100 cm linking cable |
| Warranty | 3 years, brand-new replacement |
| Reference | BL-SPECTRAL-IP65-18W-60CM-V2 |
🌱 A spectrum built for the first weeks
The SpectraLINE full spectrum covers the wavelengths photosynthesis actually uses at the seedling stage, with enough blue to stop stretching before it starts. The result is short internodes, thick stems and a root system that establishes quickly.
💧 IP65: greenhouse, cellar, utility room
Misting, closed propagators, high humidity, damp basements: the IP65 rating lets you mount the bar centimetres above your trays without worrying about splashes. This is what separates the V2 from ordinary indoor LED strips.
🔗 Chain it to match your real bench
One bar lights roughly 60 x 40 cm. To cover a full shelf, simply link several SpectraLINE units end to end with the 40 or 100 cm connection cables: one wall socket, no driver box, no complicated wiring.
🛠️ Installed in five minutes
Supplied with a shelf mounting kit and a mains cable with EU plug. There is no external power supply to source: fix it, plug it in, add a timer for the day/night cycle and you are done. A suspension kit is available separately.
How high above seedlings should the 60cm SpectraLINE be mounted?
Between 15 and 25 cm above the growing medium for seedlings and cuttings. If your plugs still stretch, lower the bar a few centimetres; if leaves pale or curl, raise it slightly. The SpectraLINE runs cool, so you can bring it close without any risk of leaf burn.
How many hours a day should it run?
16 to 18 hours a day gives the best results for seedlings and young plants. Plants need a dark period to metabolise properly, so avoid running lights 24/7. A simple mechanical or digital timer automates the cycle so you never have to think about it.
Is one bar enough, or should I chain several?
A 60cm SpectraLINE comfortably covers a standard seed tray, around 60 x 40 cm. Beyond that, or for a multi-tier indoor growing rack, budget one bar per tier and link them with a connection cable. For a longer bench, the 90cm or 120cm version is more cost-effective than chaining several short bars.
SpectraLINE has been the BloomLED reference for young plants since 2014. If your bar dims or fails within three years, we replace it with a new one, no argument.
Run several SpectraLINE V2 bars from a single power supply
A locking cable that clicks into place in seconds, with no tools and no electrical work. Designed in France by BloomLED, LED grow light specialists for over 10 years.
IP65 · 40 cm or 100 cm · Tool-free connection · SpectraLINE V2 compatible
SpectraLINE IP65 V2 Linking Cable: connect your LED bars in seconds
Own several SpectraLINE V2 bars but only one free socket? This BloomLED linking cable joins them into a single lit run powered by one driver. Available in 40 cm and 100 cm, it lets you build exactly the propagation rack, seedling bench or young-plant shelf your indoor grow needs.
| Specification | Value |
|---|---|
| Reference | CABLE-LIAISON-IP65-BMS |
| Available lengths | 40 cm or 100 cm |
| Ingress protection | IP65 |
| Compatibility | SpectraLINE IP65 V2 LED bars only |
| Connection type | Locking connector, no tools required |
| Purpose | Daisy-chaining bars on a single power supply |
| Price | From £8.90 inc. VAT |
🔗 One plug for the whole run
Link your SpectraLINE V2 bars together and power the entire line from a single socket. Fewer trailing leads, no extension blocks, and a noticeably cleaner and safer grow tent.
💧 Built for humid indoor growing
The IP65 rating shields the connection from splashes and the high humidity of a propagation area or greenhouse. The connector locks in place so watering never knocks it loose.
📏 40 cm or 100 cm to suit your rack
The 40 cm version bridges two bars sitting on the same shelf, while the 100 cm reaches from one tier to the next on a propagation rack. You match the cable to your setup, not the other way round.
Should I choose 40 cm or 100 cm?
Go for 40 cm to join two bars mounted end to end or side by side on the same tray, which is the usual layout for a seedling bench. Choose 100 cm as soon as a larger gap separates your bars, typically between two levels of a propagation shelf or across opposite sides of a rack.
Does it work with the original SpectraLINE bars?
No. This cable is made specifically for the SpectraLINE IP65 V2 generation and its dedicated connector, and it will not fit earlier versions, which use a different connection format. If you are unsure which generation you own, the BloomLED team can confirm it from the reference printed on your fixture.
An accessory under £10 that changes everything: a tidy install with no extension leads, and the freedom to grow your SpectraLINE run as your crops expand.
The turnkey cutting solution to start young plants with total confidence. — Probox Propagator M 80×60×40cm grow tent, 2 SpectraLINE IP65 60cm V2 LED bars, 24h mechanical timer and 4 Rootit cutting kits (96 cubes) shipped together.
Trust: pack curated by BloomLED expertise, growshop brand designed in France, horticultural lighting specialist for over 10 years.
Tent 80×60×40cm · 2× SpectraLINE IP65 60cm 20W · 24h timer · 96 Rootit cubes · Full-spectrum for cuttings