- Designed in France for over 15 years
- Shipped from France
- French customer service
- Individuals & professionals
- Free 24H delivery from €100 · Pay in 10x
Pack 4x SpectraLINE IP65 30cm V2 - 10W with Connecting Cable | BloomLED
Complete 4-pack of IP65 30cm LED grow bars — The waterproof solution for cuttings, seedlings and young plants on grow shelves.
Designed in France by BloomLED, LED horticultural lighting experts for over 10 years: premium quality, responsive support and manufacturer warranty.
4 bars · 30 cm · 40 W total · IP65 · Full spectrum · 3 connecting cables included
Pack description
Pack 4x SpectraLINE IP65 30 cm V2 — 40 W Waterproof for Cuttings, Seedlings & Young Plants
The BloomLED 4x SpectraLINE IP65 30 cm V2 pack combines four waterproof 30 cm LED grow bars rated at 10 W each, supplied with three connecting cables for a tidy, modular installation. With a combined 40 W output and full IP65 ingress rating, this kit is the perfect companion for cutting benches, mini-greenhouses and young plant racks. Designed in France by BloomLED, LED horticultural lighting experts for over 10 years, it covers approximately a 60 × 60 cm area with a full photosynthetic spectrum.

| Specification | Value |
|---|---|
| Number of bars | 4 horticultural LED bars |
| Length per bar | 30 cm |
| Power per bar | 10 W |
| Total pack wattage | 40 W |
| Ingress protection | IP65 (dust-tight & splashproof) |
| Spectrum | Full spectrum — vegetative & early bloom |
| Connecting cables included | 3 cables for bar daisy-chaining |
| Recommended coverage | ≈ 60 × 60 cm |
| Best for | Cuttings, seedlings, young plants, vertical racks |
| Power supply | 220-240 V AC (mains cable included) |
🌱 Cutting-tuned full spectrum
The SpectraLINE spectrum is engineered to boost rooting of cuttings and seedling vigour. Young plants receive exactly the wavelengths needed for dense root systems and strong, stocky stems.
💧 IP65 rated — No more humidity concerns
The IP65 rating protects the bars against dust and water splashes. Install them above a propagator, inside a humidity dome, or in a damp grow tent without worrying about moisture.
🔗 Easy daisy-chain with 3 cables
The 3 included connecting cables let you link all 4 bars in series onto a single wall socket. Your setup stays clean, free of multi-plugs, and adapts to any shelving layout.
🧰 Fast & modular installation
Each bar is 30 cm long: line them up end-to-end (120 cm total) or split them across shelves. Mounting clips and screws included — full setup in under 15 minutes.
⚡ Low energy footprint
At only 40 W total, this pack delivers excellent efficacy (high PPE) for minimal running cost. Ideal for growers who keep a close eye on the electricity bill.
🇫🇷 Designed in France, tested by BloomLED
The SpectraLINE range is developed and validated by our lighting engineers in France. Every pack is quality-checked by the BloomLED team before shipping — LED horticultural experts for over a decade.
The pack effectively covers a 60 × 60 cm area for cuttings and seedlings when hung 15-25 cm above the plants. For hungrier young plants, reduce coverage to about 40 × 50 cm.
Are the bars safe to use in a humid tent or propagator?Yes. The IP65 rating shields the bars from water splashes and the high ambient humidity of a mini-greenhouse, propagator or grow tent. Never submerge them directly in water though.
Can I use this pack for flowering?This kit is optimised for cuttings, seedlings and young plant growth. For flowering a mature plant, 40 W is insufficient — we recommend a higher-powered BloomLED bloom-dedicated grow light instead.
How do I wire all 4 bars to a single socket?The 3 supplied connecting cables clip between each bar, daisy-chaining all 4 in series. The mains cord connects to the first bar — one single 220 V socket powers the whole kit.
What is the rated lifespan of SpectraLINE LEDs?SpectraLINE LED modules are rated for more than 50,000 hours — around 10 years at 14 h/day. BloomLED manufacturer warranty covers 2 years parts & labour.
The all-in-one kit to start your indoor grows with confidence: 4 IP65 bars, 3 connecting cables, 1 wall socket. Optimised power, expert spectrum, BloomLED warranty.
Pack content
Stocky, sturdy seedlings from day one — the 30cm SpectraLINE V2 LED bar delivers a soft, even full-spectrum light tuned for germination, cuttings and young plants in a propagator or on a shelf.
Designed in France by BloomLED, horticultural LED specialists for over 10 years, and backed by a 3-year warranty.
10W · 30cm · IP65 waterproof · Full spectrum · Linkable · Completely silent
SpectraLINE V2 LED Grow Bar 30cm IP65: the right light for propagation
Propagation decides everything. A seedling that stretches towards a weak light never recovers the structure it lost. The 30cm SpectraLINE V2 gives seedlings, cuttings and young plants gentle intensity, a genuine full spectrum and even coverage, without scorching them or drying out the substrate. Ten watts is plenty, provided those watts are properly distributed.
| Specification | Value |
|---|---|
| Power draw | 10W |
| Length | 30cm |
| Ingress protection | IP65 - dust tight, protected against water jets |
| Spectrum | Horticultural full spectrum, tuned for propagation |
| Cooling | Passive, fanless, completely silent |
| Connection | Daisy-chainable with link cable (sold separately) |
| Best for | Seedlings, cuttings, young plants, propagators |
| Warranty | 3 years |
🌱 Full spectrum tuned to young plants
The spectrum favours the wavelengths that thicken stems and build root mass over those that push a plant to stretch. The result is compact growth, short internodes and deep green foliage, ready to transplant without shock.
💧 IP65: built for humid propagation
Propagation happens under domes, under misting and above trays you water generously. The IP65 rating seals the bar against dust and water jets, so you can mist it, wipe it clean and mount it close to the trays without worrying about the electronics.
🔗 Modular and linkable
One 30cm bar covers a standard propagation tray; several bars cover a whole shelf. The SpectraLINE IP65 V2 link cable connects them in series from a single socket, with no extension leads or power strips sitting in the damp.
🔇 Silent running, low heat
Cooling is fully passive: no fan, no noise, no dust drawn across the LEDs. Heat output stays low, so the bar can sit just centimetres above your seedlings. Perfect for an office, a utility room or a corner of the living room.
How far above seedlings should the bar be mounted?
Allow 15 to 25cm between the bar and the tops of your seedlings. If they start stretching, lower it a few centimetres; if leaves pale or curl, raise it slightly. The low heat output means you can work close, which is exactly what seedlings want.
How many bars do I need for a tray or propagator?
One 30cm bar is enough for a small propagation tray or a compact propagator. For a 60cm tray, use two bars evenly spaced, or move up to the 60cm version. On a shelving unit, run one bar per level and link them together with the connection cable.
Can I use it in a greenhouse or under misting?
Yes, that is what it was designed for. IP65 guarantees protection against dust and low-pressure water jets, which covers misting, condensation under a dome and watering above trays. Only full immersion falls outside the rating.
Successful propagation is not about raw power, it is about the right light. The SpectraLINE V2 30cm distils ten years of BloomLED expertise into a compact, waterproof and expandable format.
Run several SpectraLINE V2 bars from a single power supply
A locking cable that clicks into place in seconds, with no tools and no electrical work. Designed in France by BloomLED, LED grow light specialists for over 10 years.
IP65 · 40 cm or 100 cm · Tool-free connection · SpectraLINE V2 compatible
SpectraLINE IP65 V2 Linking Cable: connect your LED bars in seconds
Own several SpectraLINE V2 bars but only one free socket? This BloomLED linking cable joins them into a single lit run powered by one driver. Available in 40 cm and 100 cm, it lets you build exactly the propagation rack, seedling bench or young-plant shelf your indoor grow needs.

| Specification | Value |
|---|---|
| Reference | CABLE-LIAISON-IP65-BMS |
| Available lengths | 40 cm or 100 cm |
| Ingress protection | IP65 |
| Compatibility | SpectraLINE IP65 V2 LED bars only |
| Connection type | Locking connector, no tools required |
| Purpose | Daisy-chaining bars on a single power supply |
| Price | From £8.90 inc. VAT |
🔗 One plug for the whole run
Link your SpectraLINE V2 bars together and power the entire line from a single socket. Fewer trailing leads, no extension blocks, and a noticeably cleaner and safer grow tent.
💧 Built for humid indoor growing
The IP65 rating shields the connection from splashes and the high humidity of a propagation area or greenhouse. The connector locks in place so watering never knocks it loose.
📏 40 cm or 100 cm to suit your rack
The 40 cm version bridges two bars sitting on the same shelf, while the 100 cm reaches from one tier to the next on a propagation rack. You match the cable to your setup, not the other way round.
Should I choose 40 cm or 100 cm?
Go for 40 cm to join two bars mounted end to end or side by side on the same tray, which is the usual layout for a seedling bench. Choose 100 cm as soon as a larger gap separates your bars, typically between two levels of a propagation shelf or across opposite sides of a rack.
Does it work with the original SpectraLINE bars?
No. This cable is made specifically for the SpectraLINE IP65 V2 generation and its dedicated connector, and it will not fit earlier versions, which use a different connection format. If you are unsure which generation you own, the BloomLED team can confirm it from the reference printed on your fixture.
An accessory under £10 that changes everything: a tidy install with no extension leads, and the freedom to grow your SpectraLINE run as your crops expand.