SpectraBULB X30 LED Grow Bulb Pack + E27 Cable + Timer - Plug & Grow

Complete grow lighting, ready in 5 minutes — the SpectraBULB X30 30 W OSRAM LED bulb, the 100 cm E27 cable and the mechanical timer combined in a single Plug & Grow pack.

Trust: designed in France by BloomLED, an indoor growing expert for over 10 years.

30 W OSRAM · Full spectrum · 50 × 50 cm · 24 h timer

SpectraBULB X20 - LED Grow Bulb E27
  1. This product is not available at this time.

Cable with socket and switch for horticultural bulb LED E27 - EU plug
€16.90
€15.21 Save 10%
In stock - Express shipping available
Length
Product color

Mechanical programmer 24H / 15min
€13.09
€11.78 Save 10%
In stock - Express shipping available
Shipping within 24H

One of product is no longer available. This pack cant be purchased

Pack description

Horticultural LED lighting pack · Plug & Grow

SpectraBULB X30 Pack: complete LED grow lighting, ready in 5 minutes

At BloomLED, an indoor growing specialist for over 10 years, we have gathered everything you need to light your grow space into a single Plug & Grow pack. The SpectraBULB X30 30 W horticultural bulb with OSRAM LEDs, its 100 cm E27 cable and a mechanical timer let you start a high-performance, fully automated indoor grow in under five minutes, with no extra hardware and no technical skills required. It is one of the fastest ways to give seedlings, herbs and young plants the balanced light they need to thrive.

SpectraBULB X30 LED grow bulb pack with E27 cable and timer by BloomLED

Detailed technical specifications

SpecificationDetail
Power30 W — high-performance OSRAM LEDs
BaseStandard E27
SpectrumFull Spectrum (growth + flowering)
Recommended area50 × 50 cm
FanBuilt-in, ultra-quiet, < 35 dB
LED lifespan50,000 hours
CableE27, 100 cm, ready to use
TimerMechanical 24 h, 15-min increments
Warranty2 years on the bulb, brand-new replacement
SetupPlug & Grow, under 5 minutes
30 WLED power
50×50Area (cm)
<35 dBFan
50,000 hLifespan

🌱 OSRAM full spectrum

The SpectraBULB X30 uses 30 W OSRAM LEDs with a full spectrum tuned to support your plants from the vegetative stage right through to flowering, with light close to the photosynthetic ideal.

⚡ Plug & Grow in 5 minutes

Screw the bulb into the E27 socket, plug in the 100 cm cable, set the timer: your indoor grow space is up and running in under five minutes, with no tools and no complex installation.

⏱️ Automated light cycle

The 24 h mechanical timer handles switching on and off by itself. Adjustable in 15-minute steps, it applies an 18 h/6 h cycle for growth or 12 h/12 h for flowering with no action needed from you.

🔇 Ultra-quiet fan

A built-in fan under 35 dB continuously dissipates heat to protect LED lifespan, while staying discreet enough for a living room or a grow cupboard.

🛡️ BloomLED reliability

Designed in France by BloomLED, an indoor growing expert for over 10 years: a rated lifespan of 50,000 hours and a 2-year warranty with brand-new replacement of the bulb.

Frequently asked questions

What area does the SpectraBULB X30 pack cover?

The SpectraBULB X30 efficiently lights an area of roughly 50 × 50 cm. It is ideal for a few plants, a herb corner, young plants or a small grow tent. For a larger area, look at the SpectraBULB X55 or a multi-lamp pack.

How do I set the timer for growth and flowering?

Set the timer pins to 18 hours of light and 6 hours of darkness during the vegetative stage, then to 12 h/12 h to trigger flowering. Each segment represents 15 minutes, allowing precise control of the light cycle.

Does the bulb get very hot?

OSRAM LEDs are far more efficient than traditional HPS lighting and give off little heat. The built-in fan, under 35 dB, ensures constant cooling: the bulb stays moderate and you can bring it close to the foliage without any risk of burning.

Is this pack suitable for beginners?

Absolutely. The Plug & Grow concept is designed to get you started with no technical knowledge: everything is included, setup takes under five minutes and the timer automation prevents forgotten switches. It is one of the simplest ways to begin indoor growing.

All-in-one: the LED bulb, the E27 cable and the timer combined in a single pack so you can start your indoor grow without buying a single extra accessory.

✓ Designed in France✓ 10+ years of expertise✓ 2-year warranty✓ OSRAM LEDs

Complementary products

Complete your setup or compare with other BloomLED horticultural lighting solutions:

SpectraBULB X20 pack + E27 cable + timerSpectraBULB X55 55W E40 bulbPremium 30×30 indoor grow pack with tent

Pack content

The SpectraBULB X30 LED Horticultural Bulb is perfect for urban growers who want maximum yields on a minimum of area.

Growth and flowering in small spaces

Simple to use on an E27 socket
Ultra-powerful on small area
Growth & FLOWERING
100% horticultural spectrum
Small footprint Ø95x122mm

Features

  • Designed with an E27socket
  • Very long life 50.000H
  • Ultra-quiet fan
  • OSRAM LEDs
  • Max. growing area 50cm x 50cm
  • Optimized for growth and flowering

Benefits

  • Fullspectrum
  • Emits an intense light
  • Can be used alone or as a complement
  • High penetration rate in the canopy.
  • Very low cost of electricity consumption: 1€/month.

Ampoule horticole LED E27 SpectraBULB X30

The ultra-powerful LED horticultural bulb

led horticole osram culture interieur plantes croissance floraison
This SpectraBULB X30 is designed with the best components on the market. We use OSRAM LEDs, which, combined with 50° lenses, allow us to achieve a very high luminous flux at short, medium and long distances.

What are the advantages of the SpectraBULB X30 horticultural LED?

Ampoule horticole LED OSRAM
1 Very small size Ø95x122mm
2 Easy to use on standard E27 socket
3 Very high light output of 30W
4 Long distance performance
5 Ultra-quiet fan

If you want to use a LED horticultural bulb with white light, we recommend SpectraBULB X30 from our range GreenVisuaLED

Tips for using the SpectraBULB X30

Conseils utilisation ampoule horticole led pour plantes spectrabulb x30
1) SpectraBULB X30 LED horticultural bulb is to be screwed into an E27 socket
2) Place your bulb above your plant(s)
3) Leave a distance of 20 to 60cm between the top of the plants and the LED light bulb
4) Use a timer to leave the bulb on 18H/d for growth and 12H/d for flowering
5) Let nature take its course....
Lentille horticole led performante
High-end optics for high penetration
SpectraBULB X30 is a LED bulb with a total power consumption of 32W. This high performance bulb is coupled with 4 lenses of 50° which help guide the light flow to the plants.
Led multichips horticole ampoule culture plante
OSRAM horticultural LED
The SpectraBULB X30 is equipped with 16 OSRAM 2W LEDs for perfect spectrum mixing. Thanks to its 100% optimized spectrum, the bulb focuses all the light on the plant, which considerably reduces light wastage outside the horticultural area. Its intensity is sufficient for a 50cm square in the growing phase (60cm distance) and 40cm in the flowering phase (50cm distance). The SpectraBULB X30 LED horticultural bulb produces a deep red, blue and white spectrum to bring out the different pigments in your plants.
Dissipateur thermique pour led horticole
Designed for high performance heat dissipation
Unlike other solutions, LEDs do not generate intense heat and have a very small thermal footprint. The SpectraBULB X30 is equipped with a heat sink and an ultra-quiet fan for optimal heat dissipation.
Très simple ampoule horticole led e27
Easy installation and operation
This SpectraBULB X30 LED horticultural bulb can be used on any stand with a standard E27 socket.

Lighting area and features of this LED garden bulb

Superficie eclairage et caractéristiques ampoule horticole led SpectraBULB X30

Power up your grow bulb in seconds — E27 power cable with a built-in ON/OFF switch and an EU 230V plug.

Designed by BloomLED, indoor growing expert for over 10 years, for a reliable, tool-free setup.

E27 socket · ON/OFF switch · EU 230V plug · Plug & play

E27 ACCESSORY

The essential E27 power cable for your LED grow bulbs

Power and control your E27 LED grow bulbs with zero wiring: this BloomLED cable combines socket, switch and plug in one ready-to-use unit.

BloomLED E27 power cable with built-in switch and EU 230V plug

Simply screw in your SpectraBULB or any E27 horticultural bulb, plug the cable into a standard 230V wall socket, and switch your lighting on or off using the inline switch on the cord. No electrical wiring, no tools: setup is instant, whether you are starting cuttings, a vegetative phase or flowering.

SpecificationDetail
Socket typeStandard E27
SwitchBuilt-in ON/OFF on the cord
PlugEU type (Schuko) 230V
CompatibilityE27 LED grow bulbs
UseIndoor growing, dry interior
E27Socket
230VVoltage
ON/OFFSwitch
EUPlug

🔌 Plug & play setup

E27 socket, EU plug and switch are pre-wired: no electrical connections to make.

💡 Switch within reach

Turn your bulb on and off straight from the cord, without unplugging.

🌱 Built for indoor growing

Compatible with E27 LED grow bulbs for cuttings, vegetative growth and flowering.

Compact and discreet, this cable fits just as well inside a grow tent as on a houseplant shelf. It is the base of a clean setup, to complete with an adjustable holder or a timer.

Which bulbs are compatible with this cable?

All E27 LED grow bulbs, such as the BloomLED SpectraBULB range, as well as standard E27 lighting bulbs.

Can the cable stay plugged in permanently?

Yes, it is designed for dry indoor use. The built-in switch lets you cut the power without unplugging it.

The ideal companion to your E27 grow bulbs: simple, reliable and ready to plug in.

✓ Designed in France✓ Expert for 10+ years✓ E27 compatible✓ Plug & play

Complementary products

Triple E27 Adapter for 3 SpectraBULB BloomLED E27 Clip-On Lamp Holder E27 Rotary Clamp 360°

Photoperiod control without electronics — switch your LED grow light in 15-minute steps across a 24-hour cycle, 18/6 in veg and 12/12 in bloom.

Selected by BloomLED, indoor growing experts for 10+ years: no battery, no calibration, auto-restart after a power cut.

24H cycle · 15 min segments · 3680 W / 16 A · EU Schuko plug

TIMERS & CONTROLLERS

24H Mechanical Timer 3680W: rock-solid photoperiod control for indoor growing

In indoor growing, a consistent day/night cycle matters as much as raw light output. This 24-hour mechanical timer switches your LED grow light on and off in 15-minute segments — no electronics, no backup battery, no clock drift. A simple, rugged solution hand-picked by BloomLED to lock in your vegetative and flowering photoperiods.

BloomLED 24H mechanical timer 3680W for horticultural LED grow lights

Technical specifications

SpecificationValue
Programming typeAnalogue (mechanical)
Cycle24 hours, 96 segments of 15 min
Maximum load3680 W — 16 A / 230 V
ConnectionEU Schuko plug, earthed
SwitchAlways-on / Timer mode
CalibrationNone required — ready to use
ReferenceFLD-PRO-24H-MEC
24HFull cycle
15 minSegment resolution
3680 WRated load
0Batteries needed

Why growers choose this timer

🌱 Stable photoperiod, consistent harvests

18/6 in veg, 12/12 in bloom: set the tappets once and the cycle repeats identically every single day. A steady photoperiod reduces light stress and the risk of plants reverting to vegetative growth.

⚡ 3680 W: from one panel to a full room

With 16 A of headroom, this timer drives a single horticultural LED panel just as happily as a power strip feeding several bars, an extraction fan or a nutrient pump. Just keep the combined draw under 3680 W.

🔧 Mechanical means unbreakable

No display, no backup cell, no menu to reprogram after a blackout — the dial simply resumes turning when mains power returns. That is the raw reliability growers want when a tent runs unattended for months.

BloomLED tip: keep the 'always-on' position for low-PPFD cloning stages, then switch back to timer mode as soon as plants enter vegetative growth. A photoperiod drift of more than 30 minutes is enough to unsettle sensitive flowering varieties.

Frequently asked questions

Is this timer suitable for an LED grow light with a driver?

Yes. LED drivers draw a brief inrush current at start-up that the 16 A contacts of this model absorb comfortably. For multi-driver builds exceeding 1500 W combined, BloomLED recommends adding a power contactor and using the timer purely as the pilot signal.

How do I set a 12/12 flowering photoperiod?

Push down the tappets covering your desired lights-on hours — for example 8 pm to 8 am — then rotate the dial until the arrow points at the real current time. Finally slide the side switch to the clock symbol. Each lowered tappet equals 15 minutes of light.

✓ Shipped from France✓ Selected and tested by BloomLED✓ Indoor growing experts for 10+ years✓ CE compliant 230 V

Goes well with

Electronic grow light timer 230V programmable thermostat Bare-ended mains cable 150 cm

6 other products in the same category: