Combi Duct Alu/PVC 10 m — Ø200 mm — Indoor Grow Ventilation

Précommande ouverte Supply in progress Shipping within 2 to 3 weeks

€46.90 Tax included

ALMA Payez en 3, 4 ou 10x par CB, PayPal ou virement

Shipping within 2 to 3 weeks

TypeGaine

Diamètre (mm)200

CB PayPal Virement Alma 3/4/10x · paiement sécurisé

Points clés

Type : Gaine
Diamètre (mm) : 200

Free delivery
Take advantage of free home delivery in France from 100 € of purchase

Secure payment
Pay securely and pay by credit card in installments from €100 to €3,000

Secure parcels
The boxes we ship are all of high quality

Customer service
Contact us via chat, phone, email, Facebook, Instagram and TikTok

VENTILATION AND CLIMATE CONTROL

Combi Alu/PVC Duct 10 m Ø200 mm: the double-wall ducting that keeps odour and heat where they belong

A grow room is only as good as its airline. This Ø200 mm Combi Alu/PVC duct, hand-picked by BloomLED, connects extractor, carbon filter and outlet through a flexible, sealed and reinforced run built for high airflow. Ten metres is enough to wire a full setup without stacking up joints.

Combi Alu/PVC duct 10 m Ø200 mm for indoor grow room ventilation from BloomLED

Everything comes down to the wall. Plain aluminium ducting lets odour escape through micro-perforations and radiates extractor heat straight into the room it crosses. Combi ducting bonds an aluminium layer and a PVC layer around a steel spiral, so warm, loaded air stays inside all the way to the outlet — and your discretion no longer rests on the carbon filter alone.

Ø200 mm is the standard for high-volume setups: large tents, dedicated rooms, extractor and filter combinations rated 800 to 1300 m³/h. The generous cross-section keeps static pressure low, so your fan hits the same air exchange at a lower speed. Less noise, fewer vibrations, lower power draw.

Installation is quick. The duct stretches to length, bends without kinking and cuts cleanly with tin snips. Two jubilee clips secure each connection. Grower's tip: keep bends as open as you can and never coil the leftover length on the floor — every tight turn costs you real airflow.

Specification	Value
Internal diameter	200 mm
Length	10 metres
Construction	Aluminium + PVC double wall
Reinforcement	Helical steel spiral
Use	Extraction and intake
Insulation	Odour and heat
Fixing	Ø200 mm jubilee clips
Reference	GN-200-ALUPVC-10M

200 mmInternal diameter

10 mUsable length

2Alu + PVC walls

1300 m³/hAirflow handled

🌀 Alu and PVC double wall

Aluminium contains the heat, PVC seals the micro-leaks that carry smell. Together they turn the run into a genuinely closed duct rather than a simple connecting hose.

🔇 Quieter at the same airflow

The 200 mm cross-section cuts static pressure, so the extractor reaches your target air exchange at a lower speed and a noticeably lower noise level.

✂️ Flexible, extendable, cuttable

Supplied compressed, the duct stretches to a full 10 metres and cuts to the exact length of your room without deforming or kinking.

🔗 Fits the whole Ø200 ecosystem

Extractor fans, carbon filters, silencers, bends and wall vents in the 200 mm standard connect straight on with ordinary clips.

How is this different from plain aluminium ducting?

Bare aluminium is thin, perforates at every fold and passes extracted heat into whatever room it runs through. Combi ducting adds a PVC skin that seals the wall, so odour leakage over long runs drops sharply and the corridor or loft it crosses stays cool. It is the sensible choice as soon as the duct passes through living space.

How do I connect it to my fan and carbon filter?

Slide the duct five to ten centimetres over the Ø200 mm spigot, then tighten a metal clip over the overlap, at both ends. Avoid a right-angle bend immediately at the fan outlet and leave a straight section before the first turn to protect airflow.

Can I cut the 10 metres into several sections?

Yes. Compress the duct, mark your cut, snip the steel spiral with wire cutters and slice the wall with a knife. Many growers run one length from filter to fan, a second from fan to outlet, and keep the remainder for passive or active intake.

Ten metres in a single order: enough to cover both extraction and intake, with spare length to rearrange your room later without buying more ducting.

✓ Growshop expertise for over 10 years✓ Tested in real grow rooms✓ Fast dispatch from France✓ Technical advice from actual growers

Fiche technique — Combi Duct Alu/PVC 10 m — Ø200 mm — Indoor Grow Ventilation
Type	Gaine
Diamètre (mm)	200

Reference GN-200-ALUPVC-10M

Condition New

Product copy of Combi sheath in Alu/PVC 10m - 127mm diameter ideal for professional use, personal use, performance. Quality and performance guaranteed.