Propagator M Indoor Grow Pack + 2 SpectraLINE IP65 60cm V2 LED | BloomLED

The complete cloning and seedling kit — Propagator M grow tent (80×60×40 cm), 2 SpectraLINE IP65 60cm V2 LED bars (20W each) and connecting cable included.

Trust the BloomLED expertise: pack designed in France by grow shop specialists for 10+ years — full-spectrum lighting optimized for cloning and vegetative growth.

80×60×40 cm · 2 × 20W · Full spectrum · IP65 · 2-year warranty

Probox Propagator M - 80 x 60 x 40
€59.60
€56.62 Save 5%
In stock - Express shipping available
Shipping within 24H
x 2

SpectraLINE V2 LED Grow Bar 60cm IP65 - 18W - Seedlings, Cuttings and Young Plants
€139.80
€132.81 Save 5%
Supply in progress
Shipping within 2 to 3 weeks

SpectraLINE IP65 V2 Linking Cable - 40 or 100 cm - Daisy-Chain LED Bars
€8.90
€8.46 Save 5%
Supply in progress
Shipping within 2 to 3 weeks
Length
€208.30
€197.89 Save €10.42
Tax included
Shipping within 2 to 3 weeks
Quantity
Made to order Available within 2 to 3 weeks

Pack description

INDOOR GROW PACK · EXPERT LEVEL

Propagator M Pack + 2 SpectraLINE IP65 60cm V2 LED — The Complete BloomLED Solution

Start your indoor culture the right way with a premium pack designed by the BloomLED experts: a spacious Probox Propagator M grow tent (80×60×40 cm), two full-spectrum SpectraLINE IP65 60cm V2 LED bars, and the connecting cable for a clean, professional setup. A turn-key kit, designed in France, that gives your clones and seedlings the perfect conditions to root fast, grow strong and develop healthy, deep-green foliage.

Propagator M Pack SpectraLINE IP65 BloomLED

What's inside the pack

ItemQuantitySpecs
Probox Propagator M tent180 × 60 × 40 cm · 95% reflective Mylar · adjustable vents
SpectraLINE IP65 60cm V2 LED bar220W each · 40W total · full-spectrum white + red · IP65
SpectraLINE connecting cable1Quick-connect between the two bars, plug & play install
Total power draw—≈ 40W · ultra-low consumption, perfect for LED propagation
80×60×40cm (L×W×H)
40Wtotal power
IP65water-resistant
2 yearsBloomLED warranty

Why choose this Propagator M pack?

🌱 Faster germination and cloning

The SpectraLINE IP65 full-spectrum output (broad white + deep red 660nm peaks) mimics natural daylight and triggers photosynthesis from day one. Cuttings root faster and develop thicker, deeper-green foliage.

💧 Waterproof LED bars — no humidity stress

Propagator tents hold very high humidity. The IP65-rated SpectraLINE bars handle condensation, misting and water splashes without flinching. Your electrical setup stays safe — even during aggressive cloning regimens.

📦 Turn-key kit, French engineering

BloomLED assembled this pack based on 10+ years of coaching indoor growers. Tent, lights and cable: all included — no more ordering parts separately, no more compatibility headaches.

⚡ Ultra-low power — only 40W

The V2 SpectraLINE LEDs deliver a PPFD perfectly dialed in for propagation while drawing only 40W at the wall. Your electricity bill stays light — even on an 18h/day schedule.

🔧 Plug & play install in 5 minutes

Set up the Propagator, clip both LED bars to the ceiling using the included brackets, plug in the connecting cable — done. No special tools needed.

🌿 Works for every crop

Medicinal cannabis, herbs (basil, mint, rosemary), strawberries, tomatoes, peppers, ornamental plants: this cloning pack excels with every species during propagation or vegetative growth.

Detailed technical specs

FeatureValue
Propagator M tent dimensions80 × 60 × 40 cm
Inner lining600D Mylar, 95% reflectivity
Ventilation4 adjustable vents (2 bottom + 2 top)
LED bar length2 × 60 cm
Power per bar20W
SpectrumFull-spectrum white 4000K + deep red 660nm
IP ratingIP65 (splash-proof)
LED lifespan> 50,000 hours
Connecting cable1 × SpectraLINE quick-connect
Warranty2 years BloomLED

Frequently asked questions

Is this pack good for vegetative growth, not just cloning?

Yes. The SpectraLINE IP65 full-spectrum is tuned for the vegetative stage: germination, cloning, early veg. You can keep plants in the Propagator M up to about 25-30 cm tall before transplanting them to a larger grow tent.

How many cuttings can I fit in this setup?

The 0.48 m² footprint (80×60 cm) comfortably holds 40-60 cuttings in 5 cm plugs, or roughly 20-30 young plants in 7×7 cm pots. One of the most versatile formats for an indoor grower.

Why two 60 cm bars instead of one more powerful bar?

Two SpectraLINE bars spread across the tent provide far more uniform light coverage than a single central bar. Every cutting gets the same amount of PAR, preventing stretchy plants and leggy seedlings reaching for the light.

How long per day should I run the LEDs for cloning?

For cloning and vegetative growth we recommend an 18 h ON / 6 h OFF cycle. At 40W that's only ≈ 0.72 kWh/day — very economical. Add a simple timer (not included) to automate the schedule.

Can I add a third bar later for more power?

Yes — the SpectraLINE system is modular. You can daisy-chain a third bar using another connecting cable (sold separately), within the driver's recommended limit. For a more powerful setup, also check our x3 and x4 SpectraLINE packs.

✨ The ideal pack to get started with indoor culture: all the gear, nothing missing, backed by 10+ years of BloomLED expertise.

✓ Designed in France✓ 2-year warranty✓ Expert grow shop support✓ Free EU shipping over €100✓ EU stock

Complementary products

Pack x3 SpectraLINE IP65 60cm V2 — 18WPack x3 SpectraLINE IP65 30cm V2 — 30WPack x2 SpectraLINE IP65 90cm V2 — 24W

Pack content

Give your seedlings and cuttings the perfect start — Compact 80 x 60 x 40 cm propagation chamber for fast, healthy rooting.

BloomLED confidence: curated by our growshop experts in France with 10+ years supporting indoor cultivation.

80 x 60 x 40 cm · Reflective mylar lining · Optimized airflow · Heavy-duty zipper

PROPAGATION

Probox Propagator M: the compact grow chamber built for seedlings and cuttings

The Probox Propagator M is a dedicated mini grow chamber for propagation — seedlings, cuttings and young plants. Its 80 x 60 x 40 cm footprint makes it a discreet, efficient tool that fits anywhere, from a shelf in your apartment to a corner of the garage. BloomLED selected this Garden HighPro model for its ultra-reflective mylar lining, reinforced frame and optimized ventilation — everything you need to nail indoor propagation, even in winter.

Probox Propagator M 80x60x40 cm grow chamber for seedlings and cuttings BloomLED
FeatureDetail
Dimensions80 x 60 x 40 cm (L x W x H)
UseSeedlings, cuttings, young plants, propagation
Inner lining100% reflective mylar
StructureReinforced metal poles + connectors
VentilationMesh vents + cable sock ports
0.48 m²Growing area
100%Mylar lining
10+Years BloomLED expertise

🌱 Propagation success from day one

A format designed for seedlings, cuttings and young plants. The 40 cm ceiling keeps light and warmth close to the plantlets for fast sprouting and vigorous rooting.

✨ Ultra-reflective mylar lining

The inner mylar surface bounces up to 95% of the light back onto your plants. You make every watt of your propagation lamp count — LED, fluorescent or CFL.

📐 Compact and discreet

80 x 60 x 40 cm: slots onto a shelf, worktop or closet. Perfect for apartment growers starting indoor cultivation without dedicating a full room.

🔧 Fast and solid assembly

Clip-together metal poles and a heavy-duty zipper canvas. You build it in 10 minutes, tool-free, and it stays rock steady through every propagation cycle.

Which lamp should I use in the Probox Propagator M?

For cuttings and seedlings, opt for a 20-60 W propagation LED or a 2700-6500 K CFL. The 40 cm height is ideal to keep the lamp close to the plants without scorching foliage.

How many plants fit inside the Propagator M?

You can start up to 40-60 cuttings in a 60 x 40 cm tray, or 1-2 standard seedling trays. A great stepping stone before moving into a larger grow tent.

Do I need extra ventilation?

The side mesh vents are enough for passive propagation. To accelerate growth and avoid stagnant humidity, add a small 100 mm inline fan or a USB clip fan.

Give your seedlings and cuttings a stable, bright, discreet environment — the foundation of every successful indoor grow.

✓ Growshop expert 10+ years✓ BloomLED advice from France✓ Fast discreet delivery

Complementary products

Probox Propagator XL - Cultivation area 120 x 40 x 200cm - Tent for cuttings and germinationProbox BASIC - 120 x 120 x 200cm - Culture Box Culture Box - Garden HighProProbox Propagator L - 60 x 40 x 200cm - Garden HighPro

Stocky, vigorous seedlings instead of leggy ones — 18W of full-spectrum light spread across 60cm, mounted just above your propagation trays, cuttings and young plants.

Specified in France by BloomLED, horticultural LED lighting experts for over 10 years. 3-year warranty with brand-new replacement.

60cm · 18W · Full spectrum · IP65 · 50,000h · Daisy-chainable

SEEDLINGS & CUTTINGS

SpectraLINE V2 60cm LED Grow Bar: the right light for young plants

A seedling stretching towards the window, a cutting that grows tall and thin instead of bushy, a young plant that is all stem and no leaf: nine times out of ten the seed is fine, the light is not. The SpectraLINE V2 60cm delivers 18W of full-spectrum light a few centimetres above your trays and turns fragile plugs into compact, well-branched plants ready for potting on. It is the grow bar BloomLED has recommended to home growers and professionals for more than a decade.

SpectraLINE V2 60cm IP65 18W LED grow bar mounted above seedling trays

Technical specifications

SpecificationValue
Length60 cm (600 mm)
Power draw18 W
SpectrumFull spectrum, tuned for germination and vegetative growth
Ingress protectionIP65 (water and humidity resistant)
Lifespan50,000 hours (approx. 7 years at 18 h/day)
HousingPremium aluminium, passive heat dissipation
Power supplyIntegrated mains cable with EU plug, no external driver
CoverageApprox. 60 x 40 cm at intensive light levels
Daisy-chainingYes, via optional 40 or 100 cm linking cable
Warranty3 years, brand-new replacement
ReferenceBL-SPECTRAL-IP65-18W-60CM-V2
18WActual power draw
IP65Splash resistant
50,000hRated lifespan
3 yearsReplacement warranty

🌱 A spectrum built for the first weeks

The SpectraLINE full spectrum covers the wavelengths photosynthesis actually uses at the seedling stage, with enough blue to stop stretching before it starts. The result is short internodes, thick stems and a root system that establishes quickly.

💧 IP65: greenhouse, cellar, utility room

Misting, closed propagators, high humidity, damp basements: the IP65 rating lets you mount the bar centimetres above your trays without worrying about splashes. This is what separates the V2 from ordinary indoor LED strips.

🔗 Chain it to match your real bench

One bar lights roughly 60 x 40 cm. To cover a full shelf, simply link several SpectraLINE units end to end with the 40 or 100 cm connection cables: one wall socket, no driver box, no complicated wiring.

🛠️ Installed in five minutes

Supplied with a shelf mounting kit and a mains cable with EU plug. There is no external power supply to source: fix it, plug it in, add a timer for the day/night cycle and you are done. A suspension kit is available separately.

How high above seedlings should the 60cm SpectraLINE be mounted?

Between 15 and 25 cm above the growing medium for seedlings and cuttings. If your plugs still stretch, lower the bar a few centimetres; if leaves pale or curl, raise it slightly. The SpectraLINE runs cool, so you can bring it close without any risk of leaf burn.

How many hours a day should it run?

16 to 18 hours a day gives the best results for seedlings and young plants. Plants need a dark period to metabolise properly, so avoid running lights 24/7. A simple mechanical or digital timer automates the cycle so you never have to think about it.

Is one bar enough, or should I chain several?

A 60cm SpectraLINE comfortably covers a standard seed tray, around 60 x 40 cm. Beyond that, or for a multi-tier indoor growing rack, budget one bar per tier and link them with a connection cable. For a longer bench, the 90cm or 120cm version is more cost-effective than chaining several short bars.

SpectraLINE has been the BloomLED reference for young plants since 2014. If your bar dims or fails within three years, we replace it with a new one, no argument.

✓ 3-year new-replacement warranty ✓ Specified in France ✓ Indoor growing experts for 10+ years ✓ Technical advice by phone

Goes well with

SpectraLINE IP65 V2 Linking Cable - 40 or 100 cm SpectraLINE LED Grow Bar 90cm - Waterproof SpectraLINE V2 LED Grow Bar 30cm IP65 - 10W

Run several SpectraLINE V2 bars from a single power supply

A locking cable that clicks into place in seconds, with no tools and no electrical work. Designed in France by BloomLED, LED grow light specialists for over 10 years.

IP65 · 40 cm or 100 cm · Tool-free connection · SpectraLINE V2 compatible

GROW LIGHT ACCESSORY

SpectraLINE IP65 V2 Linking Cable: connect your LED bars in seconds

Own several SpectraLINE V2 bars but only one free socket? This BloomLED linking cable joins them into a single lit run powered by one driver. Available in 40 cm and 100 cm, it lets you build exactly the propagation rack, seedling bench or young-plant shelf your indoor grow needs.

IP65 linking cable for SpectraLINE V2 horticultural LED bars, 40 and 100 cm lengths
SpecificationValue
ReferenceCABLE-LIAISON-IP65-BMS
Available lengths40 cm or 100 cm
Ingress protectionIP65
CompatibilitySpectraLINE IP65 V2 LED bars only
Connection typeLocking connector, no tools required
PurposeDaisy-chaining bars on a single power supply
PriceFrom £8.90 inc. VAT
IP65Ingress rating
2Length options
0Tools needed

🔗 One plug for the whole run

Link your SpectraLINE V2 bars together and power the entire line from a single socket. Fewer trailing leads, no extension blocks, and a noticeably cleaner and safer grow tent.

💧 Built for humid indoor growing

The IP65 rating shields the connection from splashes and the high humidity of a propagation area or greenhouse. The connector locks in place so watering never knocks it loose.

📏 40 cm or 100 cm to suit your rack

The 40 cm version bridges two bars sitting on the same shelf, while the 100 cm reaches from one tier to the next on a propagation rack. You match the cable to your setup, not the other way round.

Should I choose 40 cm or 100 cm?

Go for 40 cm to join two bars mounted end to end or side by side on the same tray, which is the usual layout for a seedling bench. Choose 100 cm as soon as a larger gap separates your bars, typically between two levels of a propagation shelf or across opposite sides of a rack.

Does it work with the original SpectraLINE bars?

No. This cable is made specifically for the SpectraLINE IP65 V2 generation and its dedicated connector, and it will not fit earlier versions, which use a different connection format. If you are unsure which generation you own, the BloomLED team can confirm it from the reference printed on your fixture.

An accessory under £10 that changes everything: a tidy install with no extension leads, and the freedom to grow your SpectraLINE run as your crops expand.

✓ Designed in France✓ 10+ years of LED expertise✓ IP65 rated✓ BloomLED technical support

Goes well with

SpectraLINE V2 LED Grow Bar 30cm IP65 - 10W - Seedlings, Cuttings and Young PlantsSpectraLINE LED grow light bar for seedlings and young plants - 60CM - WaterproofSpectraLINE LED grow light bar for seedlings and young plants - 120CM - Waterproof

6 other products in the same category: