- Designed in France for over 15 years
- Shipped from France
- French customer service
- Individuals & professionals
- Free 24H delivery from €100 · Pay in 10x
Pack 4x SpectraLINE V2 120cm IP65 Horticultural LED Bars
Four horticultural LED bars for a no-compromise vegetative stage — full spectrum enriched in blue & green, even 120 x 60 cm coverage for cloning, seedlings and mother plants.
IP65 rated, series wiring on a single plug and silent passive cooling. Designed in France by BloomLED, a horticultural LED lighting expert for over 10 years.
4 bars 120 cm · 120x60 cm coverage · IP65 · Veg spectrum · 2-year warranty
SpectraLINE IP65 V2 Linking Cable - 40 or 100 cm - Daisy-Chain LED Bars
Run several SpectraLINE V2 bars from a single power supply
A locking cable that clicks into place in seconds, with no tools and no electrical work. Designed in France by BloomLED, LED grow light specialists for over 10 years.
IP65 · 40 cm or 100 cm · Tool-free connection · SpectraLINE V2 compatible
Pack description
Pack 4x SpectraLINE V2 120cm IP65: the no-compromise cloning and vegetative station
Cuttings that refuse to root, leggy seedlings stretching for light, mother plants that wear out cut after cut: the culprit is almost always lighting that is undersized or spectrally wrong for the vegetative stage. The Pack 4x SpectraLINE V2 120cm IP65 from BloomLED answers exactly that: four horticultural LED bars with a growth-calibrated full spectrum, certified IP65 protection and series wiring on a single plug. Backed by more than 10 years of French expertise and R&D, this kit installs in ten minutes and delivers even light coverage across 120 x 60 cm.
Technical specifications
| Specification | Detail |
|---|---|
| Pack contents | 4 SpectraLINE V2 LED bars + 3 link cables + power lead + clips |
| Length per bar | 120 cm |
| Light spectrum | Full spectrum enriched in blue & green (vegetative-calibrated) |
| Coverage | 120 x 60 cm (side by side) or 4 x 120 x 30 cm (vertical rack) |
| Ingress protection | IP65 (water splash & dust resistant) |
| Cooling | Passive aluminium, fanless, silent |
| Connection | Series wiring on a single power outlet |
| Distance to canopy | 10 to 30 cm |
| Warranty | 2 years — Designed in France |
Why choose this pack
🌱 A spectrum built for veg
The SpectraLINE V2 spectrum is deliberately enriched in blue and green, the wavelengths that drive vegetative photomorphogenesis: compact internodes, lateral branching and light penetration to the lower canopy. Every watt is focused on what truly matters in cloning and growth, for faster rooting and stocky, vigorous plants.
💧 IP65 rating for humid environments
Running foggers, foliar sprays, a propagator held at 85% humidity: the IP65 rating protects every bar and every link cable against water and dust. You build the ideal climate for your cuttings without ever compromising the safety of your setup.
🔗 One plug for the whole kit
Four bars, three waterproof link cables, one power lead and the mounting clips: series wiring powers everything from a single outlet. Fewer cables in a humid space means less risk and a cleaner work area.
❄️ Silent passive cooling
Each bar is built around an extruded aluminium profile that dissipates heat with no fan. Zero noise, zero wear parts, zero maintenance — and a propagator microclimate preserved to the degree.
📐 Horizontal or vertical setup
Four bars side by side form a 120 x 60 cm station; spread across a rack, they cover four independent 120 x 30 cm tiers. You multiply your propagation capacity by four without using a single extra square centimetre of floor space.
Frequently asked questions
What area does this pack light?
The four bars side by side evenly cover 120 x 60 cm — ideal for a cloning tray or propagator. In a rack configuration, each bar independently lights a 120 x 30 cm tier, giving four production levels.
Can I use it for flowering?
No. The SpectraLINE V2 intentionally omits the deep reds needed for flowering: its spectrum is specialised for cloning, seedlings and vegetative growth. To flower, add a dedicated panel such as the SpektraPanel.
Is it compatible with a humid propagator?
Yes. The IP65 rating fully protects the bars and cables against water splash, misting and high humidity. You can safely hold 80 to 90% relative humidity.
How far should the bars hang?
Between 10 and 30 cm from the canopy, ideally around 15 cm for cloning. Too high and plants stretch; too close to fresh seedlings and the intensity can stress them. An 18 h light / 6 h dark cycle is recommended.
From cutting to mother plant, this pack focuses every photon on the vegetative stage: full rooting in 10 to 14 days, compact plants and multiplied production capacity — on a single plug and without a single fan.
Pack content
Run several SpectraLINE V2 bars from a single power supply
A locking cable that clicks into place in seconds, with no tools and no electrical work. Designed in France by BloomLED, LED grow light specialists for over 10 years.
IP65 · 40 cm or 100 cm · Tool-free connection · SpectraLINE V2 compatible
SpectraLINE IP65 V2 Linking Cable: connect your LED bars in seconds
Own several SpectraLINE V2 bars but only one free socket? This BloomLED linking cable joins them into a single lit run powered by one driver. Available in 40 cm and 100 cm, it lets you build exactly the propagation rack, seedling bench or young-plant shelf your indoor grow needs.
| Specification | Value |
|---|---|
| Reference | CABLE-LIAISON-IP65-BMS |
| Available lengths | 40 cm or 100 cm |
| Ingress protection | IP65 |
| Compatibility | SpectraLINE IP65 V2 LED bars only |
| Connection type | Locking connector, no tools required |
| Purpose | Daisy-chaining bars on a single power supply |
| Price | From £8.90 inc. VAT |
🔗 One plug for the whole run
Link your SpectraLINE V2 bars together and power the entire line from a single socket. Fewer trailing leads, no extension blocks, and a noticeably cleaner and safer grow tent.
💧 Built for humid indoor growing
The IP65 rating shields the connection from splashes and the high humidity of a propagation area or greenhouse. The connector locks in place so watering never knocks it loose.
📏 40 cm or 100 cm to suit your rack
The 40 cm version bridges two bars sitting on the same shelf, while the 100 cm reaches from one tier to the next on a propagation rack. You match the cable to your setup, not the other way round.
Should I choose 40 cm or 100 cm?
Go for 40 cm to join two bars mounted end to end or side by side on the same tray, which is the usual layout for a seedling bench. Choose 100 cm as soon as a larger gap separates your bars, typically between two levels of a propagation shelf or across opposite sides of a rack.
Does it work with the original SpectraLINE bars?
No. This cable is made specifically for the SpectraLINE IP65 V2 generation and its dedicated connector, and it will not fit earlier versions, which use a different connection format. If you are unsure which generation you own, the BloomLED team can confirm it from the reference printed on your fixture.
An accessory under £10 that changes everything: a tidy install with no extension leads, and the freedom to grow your SpectraLINE run as your crops expand.
Four horticultural LED bars for a no-compromise vegetative stage — full spectrum enriched in blue & green, even 120 x 60 cm coverage for cloning, seedlings and mother plants.
IP65 rated, series wiring on a single plug and silent passive cooling. Designed in France by BloomLED, a horticultural LED lighting expert for over 10 years.
4 bars 120 cm · 120x60 cm coverage · IP65 · Veg spectrum · 2-year warranty