- Designed in France for over 15 years
- Shipped from France
- French customer service
- Individuals & professionals
- Free 24H delivery from €100 · Pay in 10x
Plug and Grow Pack 40x40 - SpectraBULB X20 - HomeLAB 40
Start your indoor garden in just a few minutes — this 40x40 pack combines the HomeLAB 40 grow tent with the full-spectrum SpectraBULB X20 LED grow light, pre-wired and ready to plug in to grow 1 to 2 plants at home.
Hand-picked by BloomLED, a premium growshop designed in France and an indoor LED lighting expert for over 10 years.
Tent 40x40x120 cm · SpectraBULB X20 LED E27 base · Full spectrum growth & flowering · Plug & Play
SpectraBULB X20 V3 - 20W E27 LED Grow Light Bulb - Veg & Bloom
Turn any E27 socket into a growing space — 20W of full spectrum COB LED is enough to carry cuttings, seedlings and houseplants from veg through to bloom across a 30 x 30 cm footprint.
Designed in France by BloomLED, an indoor lighting specialist for over 10 years: the benchmark grow bulb, now in its V3 generation.
20W · E27 base · Full spectrum horticultural white · Silent passive cooling · 50,000 h · 2-year warranty
Homebox HomeLab HL40 Grow Tent — 40 x 40 x 120 cm | BloomLED
The toughest compact grow tent on the market — 40 x 40 x 120 cm built for reliable indoor growing even in the smallest spaces.
Trust factor: made in Germany by Homebox, curated by BloomLED indoor growing experts for over 10 years.
40×40×120 cm · 700 µm Mylar lining · Ø150 mm extraction · 50 kg max load · MicroMesh anti-insect
Biobizz Light-Mix 50L – Organic Soil for Indoor LED Growing
Full control over your feeding — lightly pre-fertilised organic soil, perfect for indoor LED growing, seedlings and cuttings.
Hand-picked by BloomLED, a French indoor-growing expert for over 10 years.
50 L volume · 100% organic · Perlite included · pH balanced
Silent Duct Extractor Vent Quietline – 197 m³/h – Ø125 mm – BloomLED
Powerful and ultra-quiet ventilation for your indoor grow — The Vent Quietline 197 m³/h Ø125 mm efficiently renews the air in your growing space without compromising your discretion.
BloomLED, horticultural equipment experts for over 10 years, brings you this precision-engineered extractor for optimal performance.
Ø125 mm · 197 m³/h · Ultra-Silent · Easy Wiring
Bare-End Black Power Cable 150cm with EU Plug - BloomLED
Direct wiring for your LED grow driver — Moulded EU plug, bare-end wires: clean mains install in minutes.
BloomLED expertise · designed in France · indoor growing specialist for 10+ years.
150cm · 3×0,75mm² · EU plug · CE
Hydropassion Master Grower Pack - Complete Nutrient Kit
Achieve professional-grade yields — A comprehensive nutrient pack for all cultivation types, from start to finish.
Trust: BloomLED expertise, premium French growshop, expert for 10+ years.
Complete Nutrient Solution · All Grow Types · Enhanced Growth · Increased Yields
125mm Combi Ducting (Alu/PVC) - 3m
Master your grow environment — The 125mm Combi Duct from BloomLED ensures efficient airflow without unwanted odors or heat escaping your grow space.
BloomLED trust: French expertise, 10+ years.
125mm Diameter · 3m Length · Alu/PVC · Double Layer · Odor/Heat Proof
7L Garden HighPro Fabric Pot - 18x18x23cm - Aerated Roots
7L fabric pot for aerated, healthy roots. — 18x18x23cm, Garden HighPro quality, perfect for a full indoor grow cycle.
Trust: handpicked by BloomLED's expertise, designed in France by indoor LED horticulture specialists for 10+ years.
7 litres · 18x18x23cm · Garden HighPro · Breathable fabric
Saucer 21x21 cm — 5.6/7L Pot | BloomLED
Optimal surface protection for your grow — The 21x21 cm saucer perfectly fits 5.6L and 7L growing pots, catching excess water and protecting your growing space.
Designed for indoor cultivation, this sturdy saucer integrates seamlessly into your grow setup. BloomLED, indoor growing experts for over 10 years.
21 × 21 cm · Fits 5.6L & 7L pots · Heavy-duty plastic · Easy to clean
Domiz Wi-Fi Smart Plug 16A – Remote Control & Energy Monitoring for Indoor Growing
Run your grow room from your phone — switch on, off and schedule your grow lights, extractor fans and ventilation remotely.
Hand-picked by BloomLED, horticultural lighting expert designed in France for over 10 years.
16A · WiFi · Real-time power monitoring · Minute-precise scheduling
Adjustable Stainless Steel Hose Clamp 25-175mm for Ducting
Ensure airtight, secure connections — essential for efficient indoor grow ventilation systems.
Designed with BloomLED's 10+ years of expertise for reliable performance.
Adjustable 25-175mm · Stainless Steel · Corrosion Resistant · Secure Fastening
E27 Power Cable with Built-in Switch & EU 230V Plug — BloomLED
Power up your grow bulb in seconds — E27 power cable with a built-in ON/OFF switch and an EU 230V plug.
Designed by BloomLED, indoor growing expert for over 10 years, for a reliable, tool-free setup.
E27 socket · ON/OFF switch · EU 230V plug · Plug & play
Pack description
Plug and Grow Pack 40x40: your turnkey indoor garden
At BloomLED, an indoor LED lighting expert for more than 10 years, we built this Plug and Grow 40x40 pack to make indoor growing simple, accessible and high-performing. The HomeLAB 40 tent, the full-spectrum SpectraBULB X20 LED grow light, cabling and hanging kit are all included and pre-assembled, so you can plant and plug in the same day with nothing else to buy.
This kit suits both the beginner running a first grow and the experienced gardener looking for a compact, reliable space for cloning, vegetative growth or flowering of 1 to 2 plants. The HomeLAB 40 tent creates an enclosed, reflective environment that concentrates light onto your plants, while the SpectraBULB X20 delivers a complete light spectrum, close to natural sunlight, to support every stage of plant development. Because the tent keeps the environment stable and the light stays consistent, you can focus on your plants rather than on troubleshooting your setup.
| Feature | Detail |
|---|---|
| Grow tent | HomeLAB 40 - approx. 40 x 40 x 120 cm |
| Fabric | Reflective 600D Mylar, sturdy metal frame |
| Grow light | SpectraBULB X20 LED with E27 base |
| Light spectrum | Full spectrum for growth and flowering |
| Connection | Plug & Play, E27 cable and hanging kit included |
| Recommended area | 1 to 2 plants, ideal compact space |
| Ventilation | Pre-cut sleeves and openings for airflow |
| Brand | BloomLED, designed in France |
The benefit of a pack designed as a whole is consistency: every element has been sized to work with the others. No power calculations, no risk of under-lighting or overheating your space. You save time, avoid beginner mistakes and enjoy optimised light output from the very first use. In short, you get a coherent ecosystem where the tent, the light and the wiring have been matched to deliver healthy, even growth without guesswork.
🌱 True full-spectrum light
The SpectraBULB X20 reproduces a complete light spectrum covering the blue range for compact growth and the red range to stimulate flowering. Your plants receive balanced light at every stage, from cloning to harvest, with no need to swap bulbs between phases.
⚡ Very low power draw
The SpectraBULB X20 LED technology consumes far less than a traditional HPS grow light while producing very little heat. You cut your electricity bill and limit the risk of heat stress for your plants, even inside a small 40x40 volume.
🏠 A robust HomeLAB 40 tent
The HomeLAB 40 grow chamber is lined with highly reflective 600D Mylar that bounces light back onto the plants so nothing is wasted. Its solid metal frame, light-tight zips and tidy cable ports make it a clean, durable growing space.
🔌 Plug & Play setup
Everything is pre-wired and ready to connect. Assemble the tent, hang the light with the supplied kit, plug in the E27 base and your space is up and running. No technical skills required: it is the ideal way to start indoor growing with confidence.
🌬️ Controlled airflow
The HomeLAB 40 features sleeves and openings sized to fit ventilation matched to the volume. Good air circulation builds sturdier stems, limits excess humidity and creates a healthy microclimate for vigorous plants.
🛡️ The BloomLED selection
This pack is assembled and curated by BloomLED, a premium growshop designed in France with over 10 years of expertise. We test and choose each component for its reliability, giving you a coherent, high-performing and durable set rather than a random bundle of products.
Yes, absolutely. The Plug and Grow 40x40 pack was designed specifically for first grows. Everything is included and pre-wired: just assemble the tent, hang the light and plug in. There are no power calculations or extra purchases needed to get started.
How many plants can I grow in a 40x40?A 40x40 cm space ideally suits 1 plant grown in a larger container, or up to 2 more compact plants. It is a perfect format for growing discreetly at home while still achieving quality results thanks to the tent's concentrated light.
Does the SpectraBULB X20 handle both growth and flowering?Yes. Its full spectrum covers the lighting needs of vegetative growth as well as flowering. You do not need to change bulbs between phases: the same light supports your plants from the start to the end of the cycle.
Does the LED get very hot in a small space?No. The SpectraBULB X20 LED technology releases very little heat compared with a classic HPS light. Combined with the ventilation provision on the HomeLAB 40, it keeps temperatures under control, ideal for a compact 40x40 volume.
Do I need to buy anything else to start?The pack contains the essentials for lighting and the grow space: tent, light, cabling and hanging kit. You will simply need to add your containers, growing medium, plants and possibly extra ventilation depending on your needs. Our BloomLED team is happy to advise you.
A complete, high-performing, ready-to-use grow space: plant, plug in, grow. The Plug and Grow 40x40 pack brings together the best of BloomLED expertise to succeed with your indoor grow from day one, with quality components selected to last well beyond your first harvest.
Pack content
Turn any E27 socket into a growing space — 20W of full spectrum COB LED is enough to carry cuttings, seedlings and houseplants from veg through to bloom across a 30 x 30 cm footprint.
Designed in France by BloomLED, an indoor lighting specialist for over 10 years: the benchmark grow bulb, now in its V3 generation.
20W · E27 base · Full spectrum horticultural white · Silent passive cooling · 50,000 h · 2-year warranty
SpectraBULB X20 V3: the LED grow bulb that turns any E27 socket into a grow space
You do not need a full LED panel to get real results indoors. The SpectraBULB X20 V3 screws into a standard E27 socket and delivers a complete horticultural spectrum that carries plants from cutting to flower across 30 x 30 cm. BloomLED's benchmark grow bulb since 2009, now in its third generation.
A full white spectrum, from veg to bloom
The full spectrum COB LED covers the entire photosynthetically active range (PAR), from the blue that keeps stems short and sturdy to the deep red that supports flowering. Unlike the old pink/purple bulbs, this horticultural white lets you read the true colour of your foliage and spot a deficiency straight away. One bulb covers the whole cycle: cuttings, vegetative growth and bloom.
Silent, compact and ready to run
The aluminium body handles cooling entirely passively: no fan, so no noise and no dust pulled into your grow space. At 125 mm x Ø 95 mm it fits a small tent, a grow cabinet, a converted cupboard or a plain desk lamp. Screw it in, switch it on: no external driver, no settings.
| Specification | Value |
|---|---|
| Power | 20 W |
| Base | E27 (standard socket) |
| Technology | Full spectrum COB LED, horticultural white |
| Coverage | 30 x 30 cm |
| Beam angle | 60° |
| Cooling | Passive (aluminium, fanless) |
| Dimensions | 125 mm x Ø 95 mm |
| Power supply | 230 V mains, wired |
| Lifespan | 50,000 hours |
| Use | Vegetative growth and flowering |
| Warranty | 2 years |
🌱 Full spectrum for veg and bloom
A full spectrum COB LED covering the whole PAR range: blue for compact plants, red to drive flowering, with no need to swap bulbs mid-cycle.
🔌 Installed in 10 seconds
Universal E27 base: desk lamp, hanging socket, BloomLED triple holder. No driver, no wiring, no electrical skills required.
🔇 Passive cooling, zero noise
The aluminium body dissipates heat without a fan. Ideal for growing in a flat, bedroom or office, where any hum would be noticed.
⚡ Just 20W for 30 x 30 cm
Minimal consumption for genuine horticultural results: cuttings, seedlings, herbs and houseplants short on natural light.
🕐 50,000 hours and 2-year warranty
A 50,000-hour lifespan, more than 10 years at 12 h a day, backed by a 2-year BloomLED warranty. Buy once, grow for years.
Since 2009 the SpectraBULB has been BloomLED's benchmark grow bulb. The V3 keeps that plug-and-grow simplicity while improving spectrum consistency: the ideal entry point into indoor growing.
How far from my plants should I hang the SpectraBULB X20 V3?
Allow 20 to 30 cm above the canopy during vegetative growth, and 15 to 25 cm in bloom to maximise PPFD. Check with your hand: if the heat feels uncomfortable at leaf level, raise the bulb a few centimetres.
How many plants can one bulb light?
It covers 30 x 30 cm effectively, which means one flowering plant or three to four cuttings. For a wider area, combine several bulbs on a triple E27 holder or step up to a more powerful model.
Can I use it in an ordinary desk lamp?
Yes, as long as the socket is E27 and the fitting is rated for 20W. It runs straight off 230 V mains with no driver. It is not dimmable, so use a timer to manage the photoperiod.
What photoperiod should I run?
18 hours of light to 6 hours of darkness works very well in vegetative growth. For flowering, switch to 12 / 12 with complete darkness. A simple mechanical or digital timer automates the cycle.
The toughest compact grow tent on the market — 40 x 40 x 120 cm built for reliable indoor growing even in the smallest spaces.
Trust factor: made in Germany by Homebox, curated by BloomLED indoor growing experts for over 10 years.
40×40×120 cm · 700 µm Mylar lining · Ø150 mm extraction · 50 kg max load · MicroMesh anti-insect
Homebox HomeLab HL40 — The Premium 40x40x120 cm Grow Tent to Cultivate Anywhere, All Year Round
The Homebox HomeLab HL40 is the benchmark for compact grow tents in 40 x 40 x 120 cm. Designed for indoor growing in apartments, this premium growbox built in Germany delivers total blackout, optimised ventilation and an ultra-strong steel frame. Whether you're starting your first seedlings, cuttings or running a year-round mother plant station, it turns any corner into a reliable horticultural lab.
| Feature | Detail |
|---|---|
| Dimensions | 40 × 40 × 120 cm (W × D × H) |
| Grow area | 0.16 m² — Volume 0.16 m³ |
| Inner liner | High-density 700 µm blackout Mylar |
| Frame | Reinforced steel, 13-16 mm poles |
| Extraction port | Ø 150 mm (6") |
| Maximum load | 50 kg (LED, fan, carbon filter) |
| Air intakes | MicroMesh anti-insect, anti-dust fabric |
| Origin | Made in Germany — Homebox |
🌱 Compact 40x40 footprint, 120 cm working height
Perfect for tight spaces — closets, laundry rooms, apartment corners — the HomeLab HL40 hosts one mother plant, 4 to 6 cuttings, or your ornamental crops. The 120 cm height leaves room for a compact LED grow light and vertical plant development.
🛡️ 700 µm Mylar lining — Total blackout
The high-density Mylar interior reflects over 95 % of the light back to your plants and delivers perfect darkness for photoperiod control. The thick waterproof outer shell blocks every light and sound leak.
🏗️ Reinforced steel frame — up to 50 kg
The 13-16 mm steel poles and metal connectors hold your LED grow light, extractor fan, carbon filter and accessories without flexing. The HomeLab HL40 stays stable even when fully loaded.
🌬️ Optimised ventilation — Ø 150 mm + MicroMesh
Standard 150 mm extraction port compatible with every fan and filter on the market. Air intakes are protected by MicroMesh fabric that blocks insects, spores and dust while letting fresh air flow in smoothly.
🇩🇪 Made in Germany by Homebox — Premium reliability
Homebox has been the European benchmark for grow tents for over twenty years. Every HomeLab HL40 is produced in Germany with strict quality control: reinforced stitching, YKK zippers, silent closures and lab-tested fabric.
For a 40 x 40 cm footprint, go for a compact 30 to 60 W LED grow light. The SpectraBULB X30 from BloomLED is perfectly sized: full spectrum, plug-and-play E27 format, ideal for cloning, vegetative growth and bloom in small volumes.
What extraction system should I use with this 40 cm grow tent?A 100 to 150 m³/h extractor fan in Ø 125 or Ø 150 mm is more than enough to refresh the HL40 air. Pair it with a carbon filter if you grow aromatic plants: the Ø 150 mm port allows direct coupling without a reducer.
Can I use the HomeLab HL40 for cloning and seed starting?Absolutely. The 40 x 40 x 120 cm format is ideal for a mini propagator, heating mat and a cloning LED like the SpectraBULB X30. Total blackout plus MicroMesh ventilation create a stable, clean environment for young plants.
Is the tent hard to assemble? How long does setup take?Not at all. The HomeLab HL40 assembles in 15 to 20 minutes, tool-free. Poles click together, fabric attaches via reinforced zippers. You can also fold it back down easily if you need to move or store it.
The HomeLab HL40 isn't just a grow tent: it's the premium standard for compact indoor growing, trusted by serious growers and recommended by BloomLED's experts.
Full control over your feeding — lightly pre-fertilised organic soil, perfect for indoor LED growing, seedlings and cuttings.
Hand-picked by BloomLED, a French indoor-growing expert for over 10 years.
50 L volume · 100% organic · Perlite included · pH balanced
Biobizz Light-Mix 50L: the foundation of a precisely managed indoor grow
Biobizz Light-Mix is the go-to substrate for indoor growers who want to stay in charge of their feeding schedule. Lightly pre-fertilised, aerated with perlite and 100% organic, it gives your plants a healthy start under horticultural LED lighting.
| Feature | Value |
|---|---|
| Volume | 50 litres |
| Composition | Peat + perlite, 100% organic |
| Pre-fertilisation | Light (≈ 10 to 14 days) |
| Aeration / drainage | Optimised by perlite |
| Best for | Indoor LED growing, seedlings, cuttings |
🌱 Precise nutrient control
Lightly fertilised, Light-Mix lets you steer the organic feeding yourself from week two onward, with no risk of overfeeding.
💧 Perfect aeration and drainage
Perlite and fibres ensure optimal root oxygenation and prevent waterlogging, for a vigorous root system.
🌿 100% organic, made for LED
A natural, pH-balanced substrate designed to support growth and flowering under horticultural LED lamps.
Yes. The pre-fertilisation lasts around 10 to 14 days. After that, feed with an organic nutrient line (such as Biobizz Bio-Grow then Bio-Bloom) according to your plants' stage.
Is Light-Mix 50L suitable for LED growing?Absolutely. Its airy structure and light nutrition make it an ideal substrate for indoor growing under horticultural LED lighting, from seedling to flowering.
A light, precise substrate: you control every feed for healthy plants, from seedling to harvest.
Powerful and ultra-quiet ventilation for your indoor grow — The Vent Quietline 197 m³/h Ø125 mm efficiently renews the air in your growing space without compromising your discretion.
BloomLED, horticultural equipment experts for over 10 years, brings you this precision-engineered extractor for optimal performance.
Ø125 mm · 197 m³/h · Ultra-Silent · Easy Wiring
Silent Duct Extractor Vent Quietline – Discreet Ventilation for Your Indoor Grow
At BloomLED, we understand that noise is one of the key challenges in indoor cultivation. The Vent Quietline 197 m³/h Ø125 mm delivers powerful, silent air extraction, ensuring optimal air renewal in your grow tent or growing room without disturbing your environment.
Technical Specifications
| Specification | Value |
|---|---|
| Connection diameter | 125 mm |
| Airflow | 197 m³/h |
| Noise level | Ultra-silent |
| Type | Hardwired duct extractor |
| Reference | QUIETLINE-WINF-125 |
🌬️ 197 m³/h Airflow
With a 197 m³/h airflow rate, the Vent Quietline fully refreshes the air in a medium-sized grow tent in minutes, eliminating excess heat, humidity and odors for healthy, thriving plants.
🔇 Ultra-Silent Technology
Its advanced acoustic design minimises vibrations and noise, letting you maintain continuous ventilation without compromising discretion — ideal for apartment or residential setups.
🔧 Flexible Installation
The standard Ø125 mm connection makes it easy to hook up to existing ducting, carbon filters, and other accessories. Direct wiring gives you versatility across all ventilation systems.
🌿 Optimised for Indoor Growing
Designed for demanding growers, it maintains constant air exchange — essential for CO₂ supply, temperature regulation, and humidity management to maximise yields and plant health.
The Vent Quietline 197 m³/h is ideal for growing spaces of approximately 1 to 2 m³ (e.g., a 1x1m or 1.2x1.2m grow tent). For intensive cultivation, an air exchange rate of 60 times per hour is recommended.
Can it be connected to a carbon filter?Yes, the Ø125 mm connection is fully compatible with carbon filters of the same diameter. A duct connector (not included) is all you need for the installation. We recommend using a stainless steel duct clamp for a secure, airtight assembly.
How do I wire this duct extractor?This extractor is supplied for direct 230V mains wiring. For best results, connect it via a compatible speed controller to adjust airflow to your needs. For any electrical installation queries, consult a qualified electrician.
🌱 Vent Quietline 197 m³/h Ø125 mm: the silent, high-performance solution for optimal climate control in your indoor grow.
Direct wiring for your LED grow driver — Moulded EU plug, bare-end wires: clean mains install in minutes.
BloomLED expertise · designed in France · indoor growing specialist for 10+ years.
150cm · 3×0,75mm² · EU plug · CE
150cm Bare-End Power Cable — The Reliable Backbone of Your LED Grow Setup
Wire up LED drivers, ballasts and power supplies safely with this BloomLED mains cable. Moulded EU plug on one end, stripped bare-end wires on the other: connect your indoor grow setup in minutes, no guesswork required.
| Specification | Value |
|---|---|
| Length | 150 cm |
| Section | 3 × 0.75 mm² |
| Plug | EU (Type E/F) moulded |
| Cable end | Stripped bare wires ready to wire |
| Certification | CE compliant |
| Colour | Black |
🔌 Moulded EU plug
European standard Type E/F plug, injection-moulded for a tough, long-lasting mains connection — holds up to daily on/off cycles.
⚡ Pre-stripped bare ends
Live, neutral and earth pre-stripped at the output: direct wiring into your LED driver, ballast or transformer terminal block.
🌱 Indoor-grow ready
150 cm length suits most grow tents — easily reach your power strip or timer from inside the tent.
Yes, as long as the driver accepts a standard 230V bare-wire input (live/neutral/earth). The 3×0.75 mm² section safely supports up to around 1500W in typical residential use.
Is it compatible with BloomLED power strips?Absolutely. You can plug it into the BloomLED 5-outlet grow-room strip for a clean, safe multi-driver setup inside your indoor tent.
The must-have building block for any DIY LED grow setup: reliable, CE-certified, and priced right at BloomLED.
Achieve professional-grade yields — A comprehensive nutrient pack for all cultivation types, from start to finish.
Trust: BloomLED expertise, premium French growshop, expert for 10+ years.
Complete Nutrient Solution · All Grow Types · Enhanced Growth · Increased Yields
Unlock Your Garden's Full Potential with Hydropassion Master Grower
Elevate your indoor growing experience with the Hydropassion Master Grower Pack, a meticulously curated complete nutrient solution designed to support your plants through every stage of their life cycle. From vigorous vegetative growth to abundant flowering, this pack provides all the essential elements for exceptional results, whether you're cultivating in hydroponics, coco, or soil.
What's Inside Your Master Grower Pack?
| Product | Volume | Usage |
|---|---|---|
| Master Grower 500ml VG | 500ml | Vegetative Growth Nutrient |
| Master Grower 500ml FS | 500ml | Flowering Stage Nutrient |
| Massive Bloom 100g | 100g | Bloom Enhancer / PK Booster |
| Xtra Roots 100ml | 100ml | Root Stimulator |
| Pipette Dosage | 1 unit | Precise Nutrient Measurement |
Why Choose the Hydropassion Master Grower Pack?
Complete Nutrition
A perfectly balanced formula providing all macro and micro-nutrients your plants need from seedling to harvest.
Versatile Application
Optimized for all cultivation methods: hydroponics, coco coir, and soil, ensuring maximum flexibility for growers.
Enhanced Performance
Boosts root development, promotes lush vegetative growth, and stimulates abundant, resinous flowering.
Easy to Use
Comes with a precise dosing pipette and clear instructions, making nutrient management simple for beginners and experts alike.
- Comprehensive Nutrient Solution: Covers all growth phases with specialized formulas.
- Optimized for All Media: Suitable for hydroponic systems, coco coir, and traditional soil cultivation.
- Increased Yield & Quality: Designed to maximize plant health, vigor, and final harvest quality.
- Convenient & Economical: A cost-effective all-in-one pack, eliminating the need to purchase individual products.
Frequently Asked Questions
Is this pack suitable for beginners?Absolutely! The Hydropassion Master Grower Pack is designed for ease of use, with clear instructions and a dosing pipette included, making it perfect for new growers.
Can I use this pack with LED grow lights?Yes, this nutrient pack is fully compatible and highly effective when used in conjunction with LED grow lights, helping your plants thrive under optimized conditions.
How often should I apply these nutrients?Application frequency varies depending on your plant's growth stage and cultivation method. Refer to the detailed feeding schedule provided with the pack for best results.
Achieve professional-level results with simplified nutrient management. The Hydropassion Master Grower Pack is your all-in-one solution for healthy, productive plants!
Master your grow environment — The 125mm Combi Duct from BloomLED ensures efficient airflow without unwanted odors or heat escaping your grow space.
BloomLED trust: French expertise, 10+ years.
125mm Diameter · 3m Length · Alu/PVC · Double Layer · Odor/Heat Proof
Essential Grow Room Ventilation
Unleash Odor-Free Growth with BloomLED's 125mm Combi Ducting
Tired of tell-tale odors or fluctuating temperatures impacting your indoor grow? BloomLED's 125mm Combi Ducting is your secret weapon for maintaining a perfectly controlled and discreet growing environment. Engineered with a robust double-layered construction, this essential ventilation component effectively seals in unwanted smells and heat, ensuring your plants thrive in optimal conditions while keeping your operation under wraps. With over a decade of French horticultural expertise, BloomLED brings you reliable solutions that make a real difference to your harvest.
Why Choose BloomLED's Combi Ducting?
Every successful indoor grow hinges on effective ventilation. Our 125mm Combi Duct stands out by offering a superior solution compared to standard ducting. The innovative combination of aluminum and PVC creates a formidable barrier against common grow room challenges. This isn't just a tube; it's an investment in the discretion and efficiency of your entire setup.
The inner aluminum layer provides excellent rigidity and heat reflection, while the outer PVC layer adds durability and acts as an additional seal, crucial for odor retention. This dual-layer design means less worry about your grow's footprint and more focus on cultivating healthy, vibrant plants.
Technical Specifications
| Feature | Detail |
|---|---|
| Diameter | 125mm (approx. 5 inches) |
| Length | 3 meters (approx. 9.8 feet) |
| Material | Aluminum (inner) / PVC (outer) |
| Construction | Double-layered |
| Color | Black (outer) |
| Application | Exhaust, intake, general ventilation |
| Compatibility | Fits all standard 125mm fans & filters |
Performance at a Glance
Odor Control
Excellent
Heat Containment
High
Durability
Robust
Flexibility
Good
Key Features That Set Us Apart
- ✅ Double-Layered Defense: Our unique aluminum/PVC construction provides an impenetrable barrier, preventing any unwanted odors or heat from escaping your grow space. Keep your cultivation discreet and your environment stable.
- 💨 Optimized Airflow: The smooth inner aluminum surface minimizes air resistance, ensuring your ventilation system operates at peak efficiency, moving air effectively without losing pressure.
- 🛠️ Easy Installation & Durability: Designed for hassle-free setup, this flexible yet robust ducting can be easily maneuvered and secured. Its durable construction ensures long-lasting performance in demanding grow room conditions.
Frequently Asked Questions
Combi ducting, with its double layer of aluminum and PVC, offers superior odor and heat containment compared to single-layer aluminum options. The outer PVC layer acts as an extra barrier against smells and light, making it ideal for discreet grow operations where environmental control is paramount.
Is this ducting compatible with all 125mm fans and filters?Yes, our 125mm Combi Ducting is designed to be universally compatible with all standard 125mm (5-inch) inline fans, carbon filters, and other ventilation accessories. Its flexible nature allows for easy connection and secure fitting with appropriate clamps.
At BloomLED, we've been empowering growers for over a decade. Our passion for horticulture, combined with our deep technical expertise, ensures that every product we offer meets the highest standards of quality and performance. Trust in BloomLED for premium growing solutions.
7L fabric pot for aerated, healthy roots. — 18x18x23cm, Garden HighPro quality, perfect for a full indoor grow cycle.
Trust: handpicked by BloomLED's expertise, designed in France by indoor LED horticulture specialists for 10+ years.
7 litres · 18x18x23cm · Garden HighPro · Breathable fabric
7L Garden HighPro fabric pot: aerated roots, vigorous plants
Designed for growers looking for the right balance between volume and handling, this 7-litre fabric pot by Garden HighPro supports your plants from growth all the way to flowering. Its breathable fabric encourages natural air pruning: roots stop spiraling and instead form a dense, branching root mass — the key to healthier plants under your horticultural LED.
| Feature | Detail |
|---|---|
| Volume | 7 litres |
| Dimensions | 18 x 18 x 23 cm (L x W x H) |
| Material | Breathable non-woven felt fabric |
| Brand | Garden HighPro |
| Use | Indoor growing, soil, coco, mix |
| Handles | Reinforced handles for easy moving |
🌱 Natural air pruning
Breathable fabric oxygenates the substrate and stops roots at the edges: they branch out into a dense root mass that absorbs water and nutrients more efficiently, for plants that grow taller and stronger.
💧 Optimal drainage
Excess water drains through the walls: no more drowned roots, the substrate stays at the right humidity and root rot risks drop dramatically.
📏 Versatile 7L format
The ideal size for a single plant under a 100–150 W horticultural lamp, from rooted cuttings all the way to compact flowering in a controlled grow space.
A 7-litre fabric pot is perfect for one plant indoors during a short-to-medium vegetation + flowering cycle. For long cycles or large plants, go for the 11L or 15L formats instead.
Is the fabric pot reusable?Yes. Empty it, wash it with clean water (or in the machine at 30°C without softener), let it air-dry and it's ready for the next grow. Typical lifespan is several consecutive cycles.
At BloomLED, we systematically recommend fabric pots to growers who want healthy roots, a well-oxygenated substrate and flawless drainage — the winning combo for plants in peak form under horticultural LED.
Optimal surface protection for your grow — The 21x21 cm saucer perfectly fits 5.6L and 7L growing pots, catching excess water and protecting your growing space.
Designed for indoor cultivation, this sturdy saucer integrates seamlessly into your grow setup. BloomLED, indoor growing experts for over 10 years.
21 × 21 cm · Fits 5.6L & 7L pots · Heavy-duty plastic · Easy to clean
Saucer 21x21 cm — The Essential Companion for Your 5.6L and 7L Growing Pots
The BloomLED 21x21 cm saucer is an indispensable accessory for keeping your indoor growing space clean and protected. Compatible with 5.6L and 7L pots, it efficiently collects excess irrigation water and surplus nutrients, protecting your grow surface and equipment.
| Specification | Detail |
|---|---|
| Dimensions | 21 cm × 21 cm |
| Compatibility | 5.6L and 7L pots |
| Material | Heavy-duty plastic |
| Colour | Black |
| Maintenance | Easy, fertiliser-resistant |
| Reference | SOUCOUPE-21X21 |
🌱 Complete Surface Protection
With its raised edges, this saucer efficiently retains drainage water and nutrient solutions. Your growing surface, floor, or growing mat stays clean and dry, reducing the risk of mould and equipment damage during intensive grow cycles.
💧 Optimised Watering Management
In indoor growing, proper drainage management is essential. The 21x21 cm saucer lets you visually monitor excess water runoff, helping you adjust your watering cycles for optimal root development and nutrient uptake in your plants.
🔧 Durability and Easy Maintenance
Made from heavy-duty plastic, this saucer withstands liquid fertilisers, root boosters and hydroponic solutions without degrading. Quick and easy to clean, even during grow cycle changeovers, ensuring consistent hygiene in your growing space.
Yes, the 21x21 cm saucer is specifically designed to fit square 5.6L and 7L growing pots. Its 21 × 21 cm dimensions perfectly match these standard indoor growing pots. For round pots, ensure the base diameter does not exceed 20 cm for a proper fit.
Can I use this saucer in hydroponic or coco coir growing?Absolutely. This saucer is resistant to all nutrient solutions, liquid fertilisers and common amendments used in hydroponic, coco and soil growing. Its non-porous surface makes leachate collection easy for precise monitoring of your nutrient inputs. Suitable for both vegetative and flowering stages.
Complete your setup with the BloomLED 7L Growing Pot — the perfect pot and saucer combination for hassle-free indoor growing.
Run your grow room from your phone — switch on, off and schedule your grow lights, extractor fans and ventilation remotely.
Hand-picked by BloomLED, horticultural lighting expert designed in France for over 10 years.
16A · WiFi · Real-time power monitoring · Minute-precise scheduling
Domiz Wi-Fi Smart Plug: automate and master your indoor grow
At BloomLED, a horticultural LED lighting expert designed in France for more than 10 years, we know a successful indoor grow depends on consistent light cycles and controlled energy use. The Domiz Wi-Fi smart plug lets you control and measure your equipment remotely, straight from your phone, wherever you are.
| Specification | Value |
|---|---|
| Maximum current | 16 A |
| Connectivity | Wi-Fi (no hub) |
| Maximum humidity | 80% |
| Compatibility | Lights, extractor fans, ventilation, pumps |
🌱 Precise scheduling
Set your grow lights to switch on and off to the exact minute for perfectly regular day/night cycles, the key to even vegetative growth and flowering.
📊 Power monitoring
Track your consumption in real time or through the history log, spot energy-hungry gear and cut your electricity bill.
📱 Remote control
Connected over Wi-Fi, the plug is managed from the mobile app, so there's no more plugging and unplugging your devices by hand.
Any indoor growing equipment up to 16 A: LED grow lights and bars, extractor fans, ventilation, pumps or small heaters. Just make sure the combined load stays below the 16 A limit.
Do I need an extra hub or gateway?No. The Domiz plug connects directly to your home Wi-Fi network and is controlled through the dedicated mobile app, with no bridge or additional hardware required.
Automate your light cycles and reduce your energy use: a small accessory that transforms the day-to-day management of your grow space.
Ensure airtight, secure connections — essential for efficient indoor grow ventilation systems.
Designed with BloomLED's 10+ years of expertise for reliable performance.
Adjustable 25-175mm · Stainless Steel · Corrosion Resistant · Secure Fastening
Achieve perfect airflow and maintain optimal climate control in your grow space with the BloomLED Adjustable Stainless Steel Hose Clamp 25-175mm. This essential ventilation accessory ensures your ducting connections are not just secure, but also airtight and long-lasting, preventing costly air leaks and ensuring your extraction system operates at peak efficiency.
Why a Reliable Hose Clamp is Crucial for Your Indoor Grow
In the world of indoor growing, every detail matters. From the quality of your lights to the precision of your nutrient delivery, maintaining an optimal environment is key to healthy plants and abundant yields. Your ventilation system plays a critical role in this, removing stale air, excess heat, and humidity. A robust and reliable hose clamp is the unsung hero that ensures your entire system functions flawlessly.
Without secure connections, your ducting can sag, disconnect, or leak air, leading to:
- Reduced airflow efficiency
- Increased energy consumption
- Poor temperature and humidity control
- Potential odors escaping your grow space
- Compromised plant health and growth
The BloomLED Adjustable Hose Clamp is engineered to eliminate these concerns, providing a steadfast grip that withstands the demands of continuous operation.
Key Features of the BloomLED Adjustable Hose Clamp
Universal Adjustable Diameter (25-175mm)
Our hose clamp offers an incredibly versatile adjustment range, perfectly accommodating a wide variety of ducting sizes commonly used in indoor growing setups. From smaller 25mm (1 inch) ducts to larger 175mm (7 inch) systems, this single clamp provides a secure fit, reducing the need for multiple specialized clamps. This flexibility makes it an ideal choice for growers with varying equipment or those looking to upgrade their systems in the future.
Premium Stainless Steel Construction
Crafted from high-grade stainless steel, this clamp is built to endure. Unlike standard steel or plastic alternatives, stainless steel offers superior resistance to rust, corrosion, and degradation, even in the humid and often warm conditions of an indoor grow room. This ensures a prolonged lifespan for the clamp and consistent performance of your ventilation system, protecting your investment and your plants.
Secure & Easy Fastening Mechanism
Designed for both strength and ease of use, the robust screw-tightening mechanism allows for quick and secure installation. Simply position the clamp, tighten the screw with a screwdriver, and achieve a firm, airtight seal around your ducting. The reliable grip prevents slippage and accidental disconnections, giving you peace of mind that your ventilation system is operating safely and effectively.
Technical Specifications
| Feature | Detail |
|---|---|
| Material | Stainless Steel |
| Adjustable Diameter | 25mm - 175mm |
| Corrosion Resistance | Yes |
| Fastening Type | Screw Mechanism |
| Application | Duct Extraction Systems, Ventilation |
| Tier | Tier 1 Accessory |
Frequently Asked Questions (FAQs)
To find the correct size, measure the outer diameter of your ventilation duct. Our adjustable clamp range of 25-175mm means it will fit ducts with any outer diameter within this range. Simply choose the clamp that encompasses your duct's measurement, and then tighten it to secure.
Can this clamp be reused or repositioned?Yes, absolutely! The BloomLED Adjustable Stainless Steel Hose Clamp is designed for durability and flexibility. It can be easily loosened, repositioned, or even removed and reused on different ducting without compromising its integrity or fastening power, making it a sustainable and cost-effective choice for your grow setup.
BloomLED: Your Partner in Indoor Growing Excellence
Designed in France with over 10 years of expertise, BloomLED is more than just a supplier; we are passionate growers committed to providing premium, reliable equipment. Our Adjustable Stainless Steel Hose Clamp 25-175mm embodies our dedication to quality and performance, ensuring every component of your grow system contributes to your success.
Premium Quality
10+ Years Expertise
Dedicated SupportRelated Products to Enhance Your Ventilation System
Power up your grow bulb in seconds — E27 power cable with a built-in ON/OFF switch and an EU 230V plug.
Designed by BloomLED, indoor growing expert for over 10 years, for a reliable, tool-free setup.
E27 socket · ON/OFF switch · EU 230V plug · Plug & play
The essential E27 power cable for your LED grow bulbs
Power and control your E27 LED grow bulbs with zero wiring: this BloomLED cable combines socket, switch and plug in one ready-to-use unit.
Simply screw in your SpectraBULB or any E27 horticultural bulb, plug the cable into a standard 230V wall socket, and switch your lighting on or off using the inline switch on the cord. No electrical wiring, no tools: setup is instant, whether you are starting cuttings, a vegetative phase or flowering.
| Specification | Detail |
|---|---|
| Socket type | Standard E27 |
| Switch | Built-in ON/OFF on the cord |
| Plug | EU type (Schuko) 230V |
| Compatibility | E27 LED grow bulbs |
| Use | Indoor growing, dry interior |
🔌 Plug & play setup
E27 socket, EU plug and switch are pre-wired: no electrical connections to make.
💡 Switch within reach
Turn your bulb on and off straight from the cord, without unplugging.
🌱 Built for indoor growing
Compatible with E27 LED grow bulbs for cuttings, vegetative growth and flowering.
Compact and discreet, this cable fits just as well inside a grow tent as on a houseplant shelf. It is the base of a clean setup, to complete with an adjustable holder or a timer.
All E27 LED grow bulbs, such as the BloomLED SpectraBULB range, as well as standard E27 lighting bulbs.
Can the cable stay plugged in permanently?Yes, it is designed for dry indoor use. The built-in switch lets you cut the power without unplugging it.
The ideal companion to your E27 grow bulbs: simple, reliable and ready to plug in.
Start your indoor garden in just a few minutes — this 40x40 pack combines the HomeLAB 40 grow tent with the full-spectrum SpectraBULB X20 LED grow light, pre-wired and ready to plug in to grow 1 to 2 plants at home.
Hand-picked by BloomLED, a premium growshop designed in France and an indoor LED lighting expert for over 10 years.
Tent 40x40x120 cm · SpectraBULB X20 LED E27 base · Full spectrum growth & flowering · Plug & Play