BloomLED / Culture indoor
Plug and Grow Pack 60x60 - SpectraMODULE X135 + HydroShoot 60
Supply in progress
€553.57 €55.36
This pack for expert cultivator can grow on an area of 120cm x 120cm. The BloomLED Management Console allows you to customize the spectrum hour by hour. You will not need a mechanical programmer.
- 4pcs SpectraMODULE X135 V5
- 3 cables to connect the systems
- 1 wireless management console
- Power cables and suspension
Every stage of plant development demands a different light. Yet the vast majority of LED grow lights deliver a single, fixed spectrum from day one through harvest. It's like feeding a plant the same fertilizer from germination to fruiting — it works, but you're leaving a huge amount of potential on the table.
The SpectraMODULE X135 V5 solves this fundamental problem. With its three independent spectral channels, wireless BloomLED console compatibility, and 135W of true power draw, it gives you precise control over the quality of light your plants receive. The result: more compact growth, more vigorous flowering, and noticeably superior aromatic quality — all across a 60 × 60 cm footprint.


The X135 V5 features three channels you can activate individually or combine as needed. The blue-dominant GrowSPECTRE promotes compact growth with short internodes. The balanced VegSPECTRE supports vegetative development. The deep-red BloomSPECTRE triggers and sustains dense flowering. You adapt the light to match your plants' rhythm — not the other way around.
Paired with the BloomLED management console, the light automatically replicates the light variations of a natural day: a gradual blue-dominant sunrise in the morning, a full-spectrum peak at midday, and a gentle red-dominant sunset in the evening. It even simulates a lunar spectrum during the night. Your plants experience a true circadian rhythm with no daily intervention required on your part.
The built-in timer replaces external timers plugged into your power strip — one more reliability factor in your setup.
At the heart of the panel, a 63W Multi-Chip COB LED produces a broad, intense spectrum that is 100% PAR (photosynthetically active radiation). This technology, developed specifically for horticulture, is unavailable in standard catalogues. It is complemented by 3W High Power LEDs that deliver deep light penetration into the canopy. In practice, the flowers on the lower branches of your plants are no longer left behind.
At just 135W from the wall, the X135 V5 consumes a fraction of what a sodium system requires for equivalent coverage. Intensity is dynamically regulated by the console: power ramps up when the plant needs it and naturally drops back down the rest of the time. Over a full cycle, the difference on your electricity bill is significant — with no compromise on harvest quality.












The brushed aluminium enclosure provides efficient heat dissipation that keeps LED junction temperatures permanently below 80 °C. This thermal discipline dramatically extends the lifespan of every component — LEDs, drivers, and electronics — far beyond plastic-bodied panels that trap heat.
The NIDEC fan was selected after extensive testing for its low noise output and longevity. If you're growing in a flat, studio, or bedroom, this is a make-or-break factor in daily life. You'll eventually forget the light is even running — and that's exactly the point.
Each LED is fitted with lenses that focus and direct the light output with precision. The result: uniform coverage across the entire growing area and deep penetration into the foliage. The whole plant benefits, from the top colas down to the lowest branches.
A single BloomLED console controls up to 6 SpectraMODULE lights simultaneously. To expand your space, simply add another module: your lighting array stays centralised and perfectly synchronised. This modularity is what makes the range especially well-suited for growers who want to scale their setup without starting from scratch.




Installed in a 60 × 60 × 160 cm grow tent, the X135 V5 delivers full flowering coverage across the entire footprint. Its compact form factor also allows installation in a 120 cm tall grow tent where vertical space is limited. For optimal results, pair it with a lightweight substrate designed for indoor growing.
Start with a single X135 V5, then add a second module when your space grows. Centralised control via the console ensures perfect synchronisation between your lights. If you're aiming for a larger footprint or higher wattage from the start, the full range of BloomLED grow lights offers configurations for every project.
A common mistake is leaving all three channels at 100% around the clock. Instead, programme a blue-dominant morning ramp-up, a full-spectrum midday peak, then a red-dominant evening wind-down. During the flowering phase, run UV in short bursts — a few hours a day is plenty. Plants absorb it more effectively in alternation, which stimulates terpene production and noticeably improves the aromatic quality of your fruit.
This spectral control is precisely what separates a decent harvest from an outstanding one. And with the X135 V5, it requires no prior expertise: the console does the work once programming is in place.
The SpectraMODULE X135 V5 brings together everything indoor growers actually look for: an adjustable spectrum that adapts to every stage of growth, automated scheduling that eliminates daily tinkering, aluminium construction built to last, and whisper-quiet operation suited to home environments.
Whether you're setting up your first grow tent or looking to optimise an existing space, this 135W LED grow light meets you at your level and grows with your practice. An investment you'll measure harvest after harvest — in both quantity and quality.
Power two SpectraMODULE V5 units from a single outlet. This 30 cm link cable connects your two systems for a clean install, with no power strip or overload.
Genuine BloomLED accessory, designed in France by our horticultural lighting experts for over 10 years.
Length 30 cm · SpectraMODULE V5 compatible · Series connection · BloomLED brand
At BloomLED, an LED horticultural lighting expert for over 10 years, we design every accessory to make indoor growing simpler. This 30 cm link cable is built to connect two SpectraMODULE V5 systems together: only one module stays plugged into the mains while the second is powered in series. The result: fewer trailing cables, a free wall socket and a tidy setup in your grow space.

| Feature | Detail |
|---|---|
| Cable length | 30 cm |
| Function | Links two modules in series |
| Compatibility | SpectraMODULE V5 only |
| Brand | BloomLED — designed in France |
Link two SpectraMODULE V5 units and use a single wall socket. Ideal for optimising a grow space where outlets are limited.
A length designed to connect two panels side by side without excess cable, for a neat and secure installation.
Made specifically for the SpectraMODULE V5 range: a perfectly matched connector, reliability and peace of mind.
No. This cable is designed exclusively for the SpectraMODULE V5. For the previous generation, choose the dedicated SpectraMODULE V4 link cable.
How many systems can I link together?This cable connects two modules. You can chain several modules as long as you respect the total power allowed on your electrical circuit. If in doubt, contact our BloomLED team.
A simple accessory that changes everything: a cleaner setup, freed-up outlets and a more reliable connection for your SpectraMODULE V5 grow lights.
BloomLED / Culture indoor
Supply in progress
€553.57 €55.36
BloomLED / Culture indoor
In the process of being restocked
€447.80 €22.39
BloomLED / Culture indoor
Disponibilité sur la fiche produit
Choisir les options
BloomLED / Culture indoor
Supply in progress
BloomLED / Culture indoor
Supply in progress
BloomLED / Culture indoor
Supply in progress
€559.43 €55.94