- Designed in France for over 15 years
- Shipped from France
- French customer service
- Individuals & professionals
- Free 24H delivery from €100 · Pay in 10x
Plug and Grow Pack 80x80 - SpectraMODULE X135 - HydroShoot 80
The all-in-one 80x80 indoor growing kit — HydroShoot 80 grow tent and full-spectrum SpectraMODULE X135 LED grow light, delivered ready to plug in so you can start your first harvest with no extra gear.
The BloomLED guarantee: a pack designed in France by our horticultural lighting experts, hand-selected piece by piece over more than 10 years of indoor growing know-how.
80x80 cm footprint · 135 W full-spectrum LED · 0.64 m² · Ready to plug in
Horticultural LED Grow Light SpectraMODULE X135 V5 - 135W
- 3 independent spectral channels (growth, vegetation, flowering) — tailor the light to each stage for short internodes and dense blooms
- 135W true power draw covering 60 × 60 cm in flower — fraction of the energy cost of an equivalent sodium setup, with no compromise on yield
- 63W Multi-Chip COB LED with 100% PAR spectrum + 3W High Power LEDs: deep penetration right down to the lower canopy
- Automatic solar cycle simulation via the wireless BloomLED console — from dawn to dusk, with up to 6 lights synchronised
- Plug and play — brushed aluminium housing, silent NIDEC fan, built-in timer, power cable and hanging kit included
- This product is not available for order.
- With
- Without
Culture chamber 80x80x180cm - Version 2 - Hydroshoot range
This indoor growing box is made with Mylar 70D walls with a light reflection rate of around 95%.
The culture chamber has an area of 80cm x 80cm with a height of 180cm.
You will only need a few minutes to set up this grow room. You can hang up to 10Kg on the tubes.
- This product is not available for order.
Biobizz Light-Mix 50L – Organic Soil for Indoor LED Growing
Full control over your feeding — lightly pre-fertilised organic soil, perfect for indoor LED growing, seedlings and cuttings.
Hand-picked by BloomLED, a French indoor-growing expert for over 10 years.
50 L volume · 100% organic · Perlite included · pH balanced
TT 125mm 2-Speed Air Extractor Fan - 220 & 280m³/h
Optimal air renewal for your growing space — The TT 125mm Garden Highpro extractor delivers efficient ventilation with 2 speeds (220 and 280m³/h), perfect for grow tents and indoor gardens.
Selected by BloomLED, French indoor growing experts with over 10 years of experience. Instant Plug & Play setup.
Ø 125mm · 2 speeds · 220-280m³/h · Plug & Play with EU plug
Hydropassion Master Grower Pack - Complete Nutrient Kit
Achieve professional-grade yields — A comprehensive nutrient pack for all cultivation types, from start to finish.
Trust: BloomLED expertise, premium French growshop, expert for 10+ years.
Complete Nutrient Solution · All Grow Types · Enhanced Growth · Increased Yields
125mm Combi Ducting (Alu/PVC) - 3m
Master your grow environment — The 125mm Combi Duct from BloomLED ensures efficient airflow without unwanted odors or heat escaping your grow space.
BloomLED trust: French expertise, 10+ years.
125mm Diameter · 3m Length · Alu/PVC · Double Layer · Odor/Heat Proof
7L Growing Pot — BloomLED
The essential 7L growing pot for your indoor setup — Lightweight, resistant and perfectly sized for plants in their growth phase.
BloomLED, LED indoor growing experts for 10+ years, selects only reliable, durable accessories for your grow room.
7 litres · Compatible 21×21 saucers · Sturdy plastic · Indoor & outdoor use
Saucer 21x21 cm — 5.6/7L Pot | BloomLED
Optimal surface protection for your grow — The 21x21 cm saucer perfectly fits 5.6L and 7L growing pots, catching excess water and protecting your growing space.
Designed for indoor cultivation, this sturdy saucer integrates seamlessly into your grow setup. BloomLED, indoor growing experts for over 10 years.
21 × 21 cm · Fits 5.6L & 7L pots · Heavy-duty plastic · Easy to clean
24H Mechanical Timer 3680W for Grow Lights | BloomLED
Photoperiod control without electronics — switch your LED grow light in 15-minute steps across a 24-hour cycle, 18/6 in veg and 12/12 in bloom.
Selected by BloomLED, indoor growing experts for 10+ years: no battery, no calibration, auto-restart after a power cut.
24H cycle · 15 min segments · 3680 W / 16 A · EU Schuko plug
Adjustable Stainless Steel Hose Clamp 25-175mm for Ducting
Ensure airtight, secure connections — essential for efficient indoor grow ventilation systems.
Designed with BloomLED's 10+ years of expertise for reliable performance.
Adjustable 25-175mm · Stainless Steel · Corrosion Resistant · Secure Fastening
One of product is no longer available. This pack cant be purchased
Pack description
Plug and Grow Pack 80x80 - SpectraMODULE X135 & HydroShoot 80
Want to start growing indoors without getting lost choosing every single component? This Plug and Grow pack brings together, in one box, everything you need to cultivate an 80x80 cm space: the HydroShoot 80 grow tent, the full-spectrum SpectraMODULE X135 LED grow light and the mounting accessories. Unbox it, plug it in, start growing, it really is that simple.
Designed for complete beginners as well as growers who want a reliable second space, this kit removes any compatibility headaches between light, tent and ventilation. Every element has been sized by the BloomLED team to work together: the light output of the SpectraMODULE X135 matches the HydroShoot 80 volume exactly, not too much, not too little. The result is a controlled growing environment that is energy efficient and easy to manage day to day.
Why choose this 80x80 pack?
The 0.64 m² footprint of the HydroShoot 80 is the ideal format for a first project: large enough to take one to four plants all the way to maturity, compact enough to fit in a cupboard, a closet or the corner of a room. Its reinforced frame, highly reflective interior lining and multiple duct ports make installing ventilation and lighting straightforward.
The SpectraMODULE X135 is a new-generation LED grow light. Its full spectrum covers the entire PAR range, from the blue of vegetative growth to the red of flowering, supporting the plant through its whole cycle without ever swapping bulbs. With a high micromoles-per-joule efficiency, it delivers an even PPFD across the whole surface while keeping heat and electricity consumption low.
| Specification | Detail |
|---|---|
| Growing area | 80 x 80 cm (0.64 m²) |
| Tent | HydroShoot 80, reinforced frame, reflective mylar |
| Lighting | SpectraMODULE X135 LED, approx. 135 W |
| Spectrum | Full (growth + flowering) |
| Cycle covered | Cloning, vegetative growth, flowering |
| Setup | Plug and Grow - ready to plug in |
Everything that makes this kit unique
Ready to grow right away
Tent, LED and matched accessories in a single pack: no compatibility to check, no extra component to buy. You save time and avoid classic beginner mistakes.
Full spectrum, dialled in
The SpectraMODULE X135 reproduces a balanced solar spectrum that supports the plant from clone to flower, with no need to change light source mid-cycle.
Low power draw
The high LED efficiency keeps your electricity bill and heat output down for a more stable, more economical grow than a classic HPS lamp.
Versatile 80x80 format
Big enough for real yields, compact enough to set up discreetly at home. The reference format for a first space or a top-up grow.
Durable hardware
Reinforced tent frame, thick fabric and an LED built to last thousands of hours: an investment that follows you across many harvests.
BloomLED expertise
A pack designed in France and selected by our horticultural lighting specialists, with technical support to guide you at every step.
Setup and first steps
Assembly takes just a few simple steps. First you build the HydroShoot 80 tent frame, fit the reflective fabric, then hang the SpectraMODULE X135 LED with the supplied accessories at the right distance from the canopy. All that is left is to plug the light into a timer to manage the photoperiod: 18 hours of light in growth, 12 hours in flowering. In under an hour, your indoor growing space is up and running.
Day to day, this 80x80 pack is easy to manage. Keep an eye on temperature and humidity inside the tent, raise the lamp as the plants grow taller, and adjust watering to each development stage. The SpectraMODULE X135 keeps a stable spectrum throughout its lifespan, guaranteeing consistent conditions from one harvest to the next. To go further, the BloomLED team supports you with tailored advice on ventilation, growing media and nutrition.
The simplest way to start indoor growing in 80x80: one box, zero compatibility headaches, real results from the very first harvest.
Frequently asked questions
Yes, that is its main purpose. Everything is pre-matched and compatible: assemble the tent, hang the SpectraMODULE X135 LED and start your cycle. No technical knowledge of electricity or lighting is required to get going.
How many plants can I grow in 80x80?On a 0.64 m² surface you can run one to four plants depending on your method. A single well-trained plant will fill the whole space, while three or four smaller plants allow a faster SOG-style grow.
Is the X135 LED enough for flowering?Yes. The SpectraMODULE X135 delivers a full spectrum and a PPFD matched to the HydroShoot 80 volume. Its output was chosen to cover the entire cycle, from vegetative growth through to flowering, with no supplemental lighting.
Do I need to add ventilation?Good air extraction always improves results by refreshing the air and regulating temperature and humidity. The HydroShoot 80 has dedicated ports to easily fit an extraction kit. Our team can recommend the right model for you.
Does the LED run hot?Far cooler than an HPS lamp of equivalent power. The LED technology in the SpectraMODULE X135 converts energy into usable light with excellent efficiency, which keeps tent temperatures down and makes climate management easier.
Pack content
- 3 independent spectral channels (growth, vegetation, flowering) — tailor the light to each stage for short internodes and dense blooms
- 135W true power draw covering 60 × 60 cm in flower — fraction of the energy cost of an equivalent sodium setup, with no compromise on yield
- 63W Multi-Chip COB LED with 100% PAR spectrum + 3W High Power LEDs: deep penetration right down to the lower canopy
- Automatic solar cycle simulation via the wireless BloomLED console — from dawn to dusk, with up to 6 lights synchronised
- Plug and play — brushed aluminium housing, silent NIDEC fan, built-in timer, power cable and hanging kit included
SpectraMODULE X135 V5: Take full control of your indoor garden lighting with a 135W variable-spectrum LED grow light
Every stage of plant development demands a different light. Yet the vast majority of LED grow lights deliver a single, fixed spectrum from day one through harvest. It's like feeding a plant the same fertilizer from germination to fruiting — it works, but you're leaving a huge amount of potential on the table.
The SpectraMODULE X135 V5 solves this fundamental problem. With its three independent spectral channels, wireless BloomLED console compatibility, and 135W of true power draw, it gives you precise control over the quality of light your plants receive. The result: more compact growth, more vigorous flowering, and noticeably superior aromatic quality — all across a 60 × 60 cm footprint.
What sets the X135 V5 apart from other LED grow lights
Three distinct spectra you blend to your needs
The X135 V5 features three channels you can activate individually or combine as needed. The blue-dominant GrowSPECTRE promotes compact growth with short internodes. The balanced VegSPECTRE supports vegetative development. The deep-red BloomSPECTRE triggers and sustains dense flowering. You adapt the light to match your plants' rhythm — not the other way around.
Natural solar cycle simulation
Paired with the BloomLED management console, the light automatically replicates the light variations of a natural day: a gradual blue-dominant sunrise in the morning, a full-spectrum peak at midday, and a gentle red-dominant sunset in the evening. It even simulates a lunar spectrum during the night. Your plants experience a true circadian rhythm with no daily intervention required on your part.
The built-in timer replaces external timers plugged into your power strip — one more reliability factor in your setup.
Proprietary LED technology engineered for yield
At the heart of the panel, a 63W Multi-Chip COB LED produces a broad, intense spectrum that is 100% PAR (photosynthetically active radiation). This technology, developed specifically for horticulture, is unavailable in standard catalogues. It is complemented by 3W High Power LEDs that deliver deep light penetration into the canopy. In practice, the flowers on the lower branches of your plants are no longer left behind.
Fewer watts, same results
At just 135W from the wall, the X135 V5 consumes a fraction of what a sodium system requires for equivalent coverage. Intensity is dynamically regulated by the console: power ramps up when the plant needs it and naturally drops back down the rest of the time. Over a full cycle, the difference on your electricity bill is significant — with no compromise on harvest quality.
Technical details: every component is built to last
Brushed aluminium housing and controlled heat dissipation
The brushed aluminium enclosure provides efficient heat dissipation that keeps LED junction temperatures permanently below 80 °C. This thermal discipline dramatically extends the lifespan of every component — LEDs, drivers, and electronics — far beyond plastic-bodied panels that trap heat.
Whisper-quiet NIDEC fan
The NIDEC fan was selected after extensive testing for its low noise output and longevity. If you're growing in a flat, studio, or bedroom, this is a make-or-break factor in daily life. You'll eventually forget the light is even running — and that's exactly the point.
Professional-grade optical lenses
Each LED is fitted with lenses that focus and direct the light output with precision. The result: uniform coverage across the entire growing area and deep penetration into the foliage. The whole plant benefits, from the top colas down to the lowest branches.
Modular and scalable: up to 6 synchronised lights
A single BloomLED console controls up to 6 SpectraMODULE lights simultaneously. To expand your space, simply add another module: your lighting array stays centralised and perfectly synchronised. This modularity is what makes the range especially well-suited for growers who want to scale their setup without starting from scratch.
Real-world use: which spaces and which growers?
The perfect fit for a 60 × 60 cm grow tent
Installed in a 60 × 60 × 160 cm grow tent, the X135 V5 delivers full flowering coverage across the entire footprint. Its compact form factor also allows installation in a 120 cm tall grow tent where vertical space is limited. For optimal results, pair it with a lightweight substrate designed for indoor growing.
Scale up step by step, without starting over
Start with a single X135 V5, then add a second module when your space grows. Centralised control via the console ensures perfect synchronisation between your lights. If you're aiming for a larger footprint or higher wattage from the start, the full range of BloomLED grow lights offers configurations for every project.
Expert tip: make the most of spectral control
A common mistake is leaving all three channels at 100% around the clock. Instead, programme a blue-dominant morning ramp-up, a full-spectrum midday peak, then a red-dominant evening wind-down. During the flowering phase, run UV in short bursts — a few hours a day is plenty. Plants absorb it more effectively in alternation, which stimulates terpene production and noticeably improves the aromatic quality of your fruit.
This spectral control is precisely what separates a decent harvest from an outstanding one. And with the X135 V5, it requires no prior expertise: the console does the work once programming is in place.
LED grow lighting designed to improve with every cycle
The SpectraMODULE X135 V5 brings together everything indoor growers actually look for: an adjustable spectrum that adapts to every stage of growth, automated scheduling that eliminates daily tinkering, aluminium construction built to last, and whisper-quiet operation suited to home environments.
Whether you're setting up your first grow tent or looking to optimise an existing space, this 135W LED grow light meets you at your level and grows with your practice. An investment you'll measure harvest after harvest — in both quantity and quality.
Data sheet
- Lighting Area
- Product Size
- 22x22x8cm
- Consumption
- Optimal Operating Distance
- ~ 50cm
- Spectrum
- Growth and Flowering
- Intensity Management
- YES - Via management console (sold separately)
- Brand of LEDs used
- Thermal dissipation
- Active
- Sealing
- NO
- Guarantee
- 2 years
This indoor growing box is made with Mylar 70D walls with a light reflection rate of around 95%.
The culture chamber has an area of 80cm x 80cm with a height of 180cm.
You will only need a few minutes to set up this grow room. You can hang up to 10Kg on the tubes.
Full control over your feeding — lightly pre-fertilised organic soil, perfect for indoor LED growing, seedlings and cuttings.
Hand-picked by BloomLED, a French indoor-growing expert for over 10 years.
50 L volume · 100% organic · Perlite included · pH balanced
Biobizz Light-Mix 50L: the foundation of a precisely managed indoor grow
Biobizz Light-Mix is the go-to substrate for indoor growers who want to stay in charge of their feeding schedule. Lightly pre-fertilised, aerated with perlite and 100% organic, it gives your plants a healthy start under horticultural LED lighting.
| Feature | Value |
|---|---|
| Volume | 50 litres |
| Composition | Peat + perlite, 100% organic |
| Pre-fertilisation | Light (≈ 10 to 14 days) |
| Aeration / drainage | Optimised by perlite |
| Best for | Indoor LED growing, seedlings, cuttings |
🌱 Precise nutrient control
Lightly fertilised, Light-Mix lets you steer the organic feeding yourself from week two onward, with no risk of overfeeding.
💧 Perfect aeration and drainage
Perlite and fibres ensure optimal root oxygenation and prevent waterlogging, for a vigorous root system.
🌿 100% organic, made for LED
A natural, pH-balanced substrate designed to support growth and flowering under horticultural LED lamps.
Yes. The pre-fertilisation lasts around 10 to 14 days. After that, feed with an organic nutrient line (such as Biobizz Bio-Grow then Bio-Bloom) according to your plants' stage.
Is Light-Mix 50L suitable for LED growing?Absolutely. Its airy structure and light nutrition make it an ideal substrate for indoor growing under horticultural LED lighting, from seedling to flowering.
A light, precise substrate: you control every feed for healthy plants, from seedling to harvest.
Optimal air renewal for your growing space — The TT 125mm Garden Highpro extractor delivers efficient ventilation with 2 speeds (220 and 280m³/h), perfect for grow tents and indoor gardens.
Selected by BloomLED, French indoor growing experts with over 10 years of experience. Instant Plug & Play setup.
Ø 125mm · 2 speeds · 220-280m³/h · Plug & Play with EU plug
TT 125mm Air Extractor — Dual-Speed Ventilation for High-Performance Indoor Growing
Proper air exchange is a cornerstone of successful indoor cultivation. The TT 125mm extractor fan by Garden Highpro provides a reliable, versatile solution with two ventilation speeds: 220 m³/h for gentle extraction during vegetative growth, and 280 m³/h to meet the demands of flowering. Designed to fit 125mm ducting with a simple hose clamp, it installs in minutes and plugs in directly thanks to its integrated power cord.
| Specification | Detail |
|---|---|
| Diameter | 125 mm |
| Airflow speed 1 | 220 m³/h |
| Airflow speed 2 | 280 m³/h |
| Speed settings | 2 |
| Connection | Plug & Play with EU plug |
| Ducting | 125mm duct + hose clamp |
| Brand | Garden Highpro |
🌬️ Adaptive Dual Airflow
Switch between 220 and 280 m³/h depending on your plants' needs. Low speed suits the vegetative phase, while high speed provides the extraction power needed during flowering when plants generate more heat and humidity.
⚡ Plug & Play Installation
Supplied pre-wired with a plug, this extractor connects instantly with no electrical work. Attach it to your 125mm ducting with a hose clamp and your ventilation system is ready to run in minutes.
🔧 Universal 125mm Compatibility
The 125mm format is the most widely used standard in indoor growing. This extractor integrates seamlessly into existing setups and connects easily to carbon filters, ducting, and silencers of the same diameter.
🌱 Controlled Climate
Effective air renewal regulates temperature, controls humidity, and supplies the fresh CO2 your plants need. The TT 125mm extractor maintains ideal conditions for vigorous growth and abundant flowering.
With a maximum airflow of 280 m³/h, this extractor is sized for growing areas up to approximately 2 m². For efficient air renewal, aim to exchange the air volume in your tent 60 times per hour. Calculate your tent volume (L × W × H) and check the airflow is sufficient.
Can it be connected to a carbon filter?Absolutely. The TT 125mm extractor is compatible with all 125mm carbon filters. This combination is essential for neutralising odours in indoor growing. Place the filter at the extractor intake for optimal filtration.
What is the difference between the two speeds?Speed 1 (220 m³/h) provides moderate extraction, perfect for the growth phase or when temperatures remain stable. Speed 2 (280 m³/h) delivers higher airflow, ideal during flowering or in summer when heat builds up in your growing space.
The Garden Highpro TT 125mm extractor: the Plug & Play solution for effective dual-speed ventilation in your indoor growing space.
Achieve professional-grade yields — A comprehensive nutrient pack for all cultivation types, from start to finish.
Trust: BloomLED expertise, premium French growshop, expert for 10+ years.
Complete Nutrient Solution · All Grow Types · Enhanced Growth · Increased Yields
Unlock Your Garden's Full Potential with Hydropassion Master Grower
Elevate your indoor growing experience with the Hydropassion Master Grower Pack, a meticulously curated complete nutrient solution designed to support your plants through every stage of their life cycle. From vigorous vegetative growth to abundant flowering, this pack provides all the essential elements for exceptional results, whether you're cultivating in hydroponics, coco, or soil.
What's Inside Your Master Grower Pack?
| Product | Volume | Usage |
|---|---|---|
| Master Grower 500ml VG | 500ml | Vegetative Growth Nutrient |
| Master Grower 500ml FS | 500ml | Flowering Stage Nutrient |
| Massive Bloom 100g | 100g | Bloom Enhancer / PK Booster |
| Xtra Roots 100ml | 100ml | Root Stimulator |
| Pipette Dosage | 1 unit | Precise Nutrient Measurement |
Why Choose the Hydropassion Master Grower Pack?
Complete Nutrition
A perfectly balanced formula providing all macro and micro-nutrients your plants need from seedling to harvest.
Versatile Application
Optimized for all cultivation methods: hydroponics, coco coir, and soil, ensuring maximum flexibility for growers.
Enhanced Performance
Boosts root development, promotes lush vegetative growth, and stimulates abundant, resinous flowering.
Easy to Use
Comes with a precise dosing pipette and clear instructions, making nutrient management simple for beginners and experts alike.
- Comprehensive Nutrient Solution: Covers all growth phases with specialized formulas.
- Optimized for All Media: Suitable for hydroponic systems, coco coir, and traditional soil cultivation.
- Increased Yield & Quality: Designed to maximize plant health, vigor, and final harvest quality.
- Convenient & Economical: A cost-effective all-in-one pack, eliminating the need to purchase individual products.
Frequently Asked Questions
Is this pack suitable for beginners?Absolutely! The Hydropassion Master Grower Pack is designed for ease of use, with clear instructions and a dosing pipette included, making it perfect for new growers.
Can I use this pack with LED grow lights?Yes, this nutrient pack is fully compatible and highly effective when used in conjunction with LED grow lights, helping your plants thrive under optimized conditions.
How often should I apply these nutrients?Application frequency varies depending on your plant's growth stage and cultivation method. Refer to the detailed feeding schedule provided with the pack for best results.
Achieve professional-level results with simplified nutrient management. The Hydropassion Master Grower Pack is your all-in-one solution for healthy, productive plants!
Master your grow environment — The 125mm Combi Duct from BloomLED ensures efficient airflow without unwanted odors or heat escaping your grow space.
BloomLED trust: French expertise, 10+ years.
125mm Diameter · 3m Length · Alu/PVC · Double Layer · Odor/Heat Proof
Essential Grow Room Ventilation
Unleash Odor-Free Growth with BloomLED's 125mm Combi Ducting
Tired of tell-tale odors or fluctuating temperatures impacting your indoor grow? BloomLED's 125mm Combi Ducting is your secret weapon for maintaining a perfectly controlled and discreet growing environment. Engineered with a robust double-layered construction, this essential ventilation component effectively seals in unwanted smells and heat, ensuring your plants thrive in optimal conditions while keeping your operation under wraps. With over a decade of French horticultural expertise, BloomLED brings you reliable solutions that make a real difference to your harvest.
Why Choose BloomLED's Combi Ducting?
Every successful indoor grow hinges on effective ventilation. Our 125mm Combi Duct stands out by offering a superior solution compared to standard ducting. The innovative combination of aluminum and PVC creates a formidable barrier against common grow room challenges. This isn't just a tube; it's an investment in the discretion and efficiency of your entire setup.
The inner aluminum layer provides excellent rigidity and heat reflection, while the outer PVC layer adds durability and acts as an additional seal, crucial for odor retention. This dual-layer design means less worry about your grow's footprint and more focus on cultivating healthy, vibrant plants.
Technical Specifications
| Feature | Detail |
|---|---|
| Diameter | 125mm (approx. 5 inches) |
| Length | 3 meters (approx. 9.8 feet) |
| Material | Aluminum (inner) / PVC (outer) |
| Construction | Double-layered |
| Color | Black (outer) |
| Application | Exhaust, intake, general ventilation |
| Compatibility | Fits all standard 125mm fans & filters |
Performance at a Glance
Odor Control
Excellent
Heat Containment
High
Durability
Robust
Flexibility
Good
Key Features That Set Us Apart
- ✅ Double-Layered Defense: Our unique aluminum/PVC construction provides an impenetrable barrier, preventing any unwanted odors or heat from escaping your grow space. Keep your cultivation discreet and your environment stable.
- 💨 Optimized Airflow: The smooth inner aluminum surface minimizes air resistance, ensuring your ventilation system operates at peak efficiency, moving air effectively without losing pressure.
- 🛠️ Easy Installation & Durability: Designed for hassle-free setup, this flexible yet robust ducting can be easily maneuvered and secured. Its durable construction ensures long-lasting performance in demanding grow room conditions.
Frequently Asked Questions
Combi ducting, with its double layer of aluminum and PVC, offers superior odor and heat containment compared to single-layer aluminum options. The outer PVC layer acts as an extra barrier against smells and light, making it ideal for discreet grow operations where environmental control is paramount.
Is this ducting compatible with all 125mm fans and filters?Yes, our 125mm Combi Ducting is designed to be universally compatible with all standard 125mm (5-inch) inline fans, carbon filters, and other ventilation accessories. Its flexible nature allows for easy connection and secure fitting with appropriate clamps.
At BloomLED, we've been empowering growers for over a decade. Our passion for horticulture, combined with our deep technical expertise, ensures that every product we offer meets the highest standards of quality and performance. Trust in BloomLED for premium growing solutions.
The essential 7L growing pot for your indoor setup — Lightweight, resistant and perfectly sized for plants in their growth phase.
BloomLED, LED indoor growing experts for 10+ years, selects only reliable, durable accessories for your grow room.
7 litres · Compatible 21×21 saucers · Sturdy plastic · Indoor & outdoor use
7L Growing Pot — The Essential for Your Indoor Grow
At BloomLED, every detail matters for a successful grow. This 7L growing pot is the ideal base accessory for housing your plants during the vegetative or flowering phase. Sturdy, lightweight and perfectly adapted to LED grow conditions, it integrates naturally into your indoor space.
Technical Specifications
| Specification | Detail |
|---|---|
| Capacity | 7 litres |
| Material | Resistant plastic (polypropylene) |
| Saucer compatibility | 21×21 cm saucer |
| Use | Indoor & outdoor growing |
| Reference | POT-CULT-7L |
🌱 Optimal Size for Growth
With 7 litres of volume, this pot provides sufficient root space to support your plants throughout the entire vegetative phase. Ideal for medium-sized species grown under horticultural LED lighting.
💧 Efficient Drainage
Designed to promote optimal drainage of excess water, this pot protects your roots from rot and maintains a balanced humidity level in your substrate — key to healthy growth in indoor cultivation.
♻️ Durability & Resilience
Made from quality plastic, this pot withstands repeated handling, temperature variations and the humidity of your grow room. A minimal investment for optimal results across multiple grow cycles.
For this 7L growing pot, we recommend the 21×21 cm saucer available on BloomLED. It fits the pot's dimensions perfectly and protects your grow space from water overflow during watering.
Is this pot suitable for LED growing?Absolutely! This pot is perfectly adapted for growing under horticultural LED lighting. Its 7L capacity is ideal for plants in the vegetative or flowering phase under BloomLED lighting systems. It combines perfectly with our range of substrates and soils for indoor growing.
✓ Essential accessory — The BloomLED 7L pot is the reliable companion for all indoor growers, from beginner to expert.
Optimal surface protection for your grow — The 21x21 cm saucer perfectly fits 5.6L and 7L growing pots, catching excess water and protecting your growing space.
Designed for indoor cultivation, this sturdy saucer integrates seamlessly into your grow setup. BloomLED, indoor growing experts for over 10 years.
21 × 21 cm · Fits 5.6L & 7L pots · Heavy-duty plastic · Easy to clean
Saucer 21x21 cm — The Essential Companion for Your 5.6L and 7L Growing Pots
The BloomLED 21x21 cm saucer is an indispensable accessory for keeping your indoor growing space clean and protected. Compatible with 5.6L and 7L pots, it efficiently collects excess irrigation water and surplus nutrients, protecting your grow surface and equipment.
| Specification | Detail |
|---|---|
| Dimensions | 21 cm × 21 cm |
| Compatibility | 5.6L and 7L pots |
| Material | Heavy-duty plastic |
| Colour | Black |
| Maintenance | Easy, fertiliser-resistant |
| Reference | SOUCOUPE-21X21 |
🌱 Complete Surface Protection
With its raised edges, this saucer efficiently retains drainage water and nutrient solutions. Your growing surface, floor, or growing mat stays clean and dry, reducing the risk of mould and equipment damage during intensive grow cycles.
💧 Optimised Watering Management
In indoor growing, proper drainage management is essential. The 21x21 cm saucer lets you visually monitor excess water runoff, helping you adjust your watering cycles for optimal root development and nutrient uptake in your plants.
🔧 Durability and Easy Maintenance
Made from heavy-duty plastic, this saucer withstands liquid fertilisers, root boosters and hydroponic solutions without degrading. Quick and easy to clean, even during grow cycle changeovers, ensuring consistent hygiene in your growing space.
Yes, the 21x21 cm saucer is specifically designed to fit square 5.6L and 7L growing pots. Its 21 × 21 cm dimensions perfectly match these standard indoor growing pots. For round pots, ensure the base diameter does not exceed 20 cm for a proper fit.
Can I use this saucer in hydroponic or coco coir growing?Absolutely. This saucer is resistant to all nutrient solutions, liquid fertilisers and common amendments used in hydroponic, coco and soil growing. Its non-porous surface makes leachate collection easy for precise monitoring of your nutrient inputs. Suitable for both vegetative and flowering stages.
Complete your setup with the BloomLED 7L Growing Pot — the perfect pot and saucer combination for hassle-free indoor growing.
Photoperiod control without electronics — switch your LED grow light in 15-minute steps across a 24-hour cycle, 18/6 in veg and 12/12 in bloom.
Selected by BloomLED, indoor growing experts for 10+ years: no battery, no calibration, auto-restart after a power cut.
24H cycle · 15 min segments · 3680 W / 16 A · EU Schuko plug
24H Mechanical Timer 3680W: rock-solid photoperiod control for indoor growing
In indoor growing, a consistent day/night cycle matters as much as raw light output. This 24-hour mechanical timer switches your LED grow light on and off in 15-minute segments — no electronics, no backup battery, no clock drift. A simple, rugged solution hand-picked by BloomLED to lock in your vegetative and flowering photoperiods.
Technical specifications
| Specification | Value |
|---|---|
| Programming type | Analogue (mechanical) |
| Cycle | 24 hours, 96 segments of 15 min |
| Maximum load | 3680 W — 16 A / 230 V |
| Connection | EU Schuko plug, earthed |
| Switch | Always-on / Timer mode |
| Calibration | None required — ready to use |
| Reference | FLD-PRO-24H-MEC |
Why growers choose this timer
🌱 Stable photoperiod, consistent harvests
18/6 in veg, 12/12 in bloom: set the tappets once and the cycle repeats identically every single day. A steady photoperiod reduces light stress and the risk of plants reverting to vegetative growth.
⚡ 3680 W: from one panel to a full room
With 16 A of headroom, this timer drives a single horticultural LED panel just as happily as a power strip feeding several bars, an extraction fan or a nutrient pump. Just keep the combined draw under 3680 W.
🔧 Mechanical means unbreakable
No display, no backup cell, no menu to reprogram after a blackout — the dial simply resumes turning when mains power returns. That is the raw reliability growers want when a tent runs unattended for months.
BloomLED tip: keep the 'always-on' position for low-PPFD cloning stages, then switch back to timer mode as soon as plants enter vegetative growth. A photoperiod drift of more than 30 minutes is enough to unsettle sensitive flowering varieties.
Frequently asked questions
Is this timer suitable for an LED grow light with a driver?
Yes. LED drivers draw a brief inrush current at start-up that the 16 A contacts of this model absorb comfortably. For multi-driver builds exceeding 1500 W combined, BloomLED recommends adding a power contactor and using the timer purely as the pilot signal.
How do I set a 12/12 flowering photoperiod?
Push down the tappets covering your desired lights-on hours — for example 8 pm to 8 am — then rotate the dial until the arrow points at the real current time. Finally slide the side switch to the clock symbol. Each lowered tappet equals 15 minutes of light.
Ensure airtight, secure connections — essential for efficient indoor grow ventilation systems.
Designed with BloomLED's 10+ years of expertise for reliable performance.
Adjustable 25-175mm · Stainless Steel · Corrosion Resistant · Secure Fastening
Achieve perfect airflow and maintain optimal climate control in your grow space with the BloomLED Adjustable Stainless Steel Hose Clamp 25-175mm. This essential ventilation accessory ensures your ducting connections are not just secure, but also airtight and long-lasting, preventing costly air leaks and ensuring your extraction system operates at peak efficiency.
Why a Reliable Hose Clamp is Crucial for Your Indoor Grow
In the world of indoor growing, every detail matters. From the quality of your lights to the precision of your nutrient delivery, maintaining an optimal environment is key to healthy plants and abundant yields. Your ventilation system plays a critical role in this, removing stale air, excess heat, and humidity. A robust and reliable hose clamp is the unsung hero that ensures your entire system functions flawlessly.
Without secure connections, your ducting can sag, disconnect, or leak air, leading to:
- Reduced airflow efficiency
- Increased energy consumption
- Poor temperature and humidity control
- Potential odors escaping your grow space
- Compromised plant health and growth
The BloomLED Adjustable Hose Clamp is engineered to eliminate these concerns, providing a steadfast grip that withstands the demands of continuous operation.
Key Features of the BloomLED Adjustable Hose Clamp
Universal Adjustable Diameter (25-175mm)
Our hose clamp offers an incredibly versatile adjustment range, perfectly accommodating a wide variety of ducting sizes commonly used in indoor growing setups. From smaller 25mm (1 inch) ducts to larger 175mm (7 inch) systems, this single clamp provides a secure fit, reducing the need for multiple specialized clamps. This flexibility makes it an ideal choice for growers with varying equipment or those looking to upgrade their systems in the future.
Premium Stainless Steel Construction
Crafted from high-grade stainless steel, this clamp is built to endure. Unlike standard steel or plastic alternatives, stainless steel offers superior resistance to rust, corrosion, and degradation, even in the humid and often warm conditions of an indoor grow room. This ensures a prolonged lifespan for the clamp and consistent performance of your ventilation system, protecting your investment and your plants.
Secure & Easy Fastening Mechanism
Designed for both strength and ease of use, the robust screw-tightening mechanism allows for quick and secure installation. Simply position the clamp, tighten the screw with a screwdriver, and achieve a firm, airtight seal around your ducting. The reliable grip prevents slippage and accidental disconnections, giving you peace of mind that your ventilation system is operating safely and effectively.
Technical Specifications
| Feature | Detail |
|---|---|
| Material | Stainless Steel |
| Adjustable Diameter | 25mm - 175mm |
| Corrosion Resistance | Yes |
| Fastening Type | Screw Mechanism |
| Application | Duct Extraction Systems, Ventilation |
| Tier | Tier 1 Accessory |
Frequently Asked Questions (FAQs)
To find the correct size, measure the outer diameter of your ventilation duct. Our adjustable clamp range of 25-175mm means it will fit ducts with any outer diameter within this range. Simply choose the clamp that encompasses your duct's measurement, and then tighten it to secure.
Can this clamp be reused or repositioned?Yes, absolutely! The BloomLED Adjustable Stainless Steel Hose Clamp is designed for durability and flexibility. It can be easily loosened, repositioned, or even removed and reused on different ducting without compromising its integrity or fastening power, making it a sustainable and cost-effective choice for your grow setup.
BloomLED: Your Partner in Indoor Growing Excellence
Designed in France with over 10 years of expertise, BloomLED is more than just a supplier; we are passionate growers committed to providing premium, reliable equipment. Our Adjustable Stainless Steel Hose Clamp 25-175mm embodies our dedication to quality and performance, ensuring every component of your grow system contributes to your success.
Premium Quality
10+ Years Expertise
Dedicated SupportRelated Products to Enhance Your Ventilation System
The all-in-one 80x80 indoor growing kit — HydroShoot 80 grow tent and full-spectrum SpectraMODULE X135 LED grow light, delivered ready to plug in so you can start your first harvest with no extra gear.
The BloomLED guarantee: a pack designed in France by our horticultural lighting experts, hand-selected piece by piece over more than 10 years of indoor growing know-how.
80x80 cm footprint · 135 W full-spectrum LED · 0.64 m² · Ready to plug in