SpectraBULB X30 30W Pack + Clamp with E27 Socket — BloomLED

Light up your indoor grow in under 2 minutes — BloomLED pack pairing the SpectraBULB X30 30W full-spectrum horticultural LED bulb with an adjustable E27 socket clamp. Ideal for cuttings, mother plants and supplemental light.

Trust: designed in France by BloomLED, horticultural LED expert for 10+ years.

True 30W · Full spectrum · Ceramic E27 · Adjustable clamp · Plug-and-grow

SpectraBULB X20 - LED Grow Bulb E27
  1. This product is not available at this time.

Clamp with E27 and EU plug
€24.90
€21.17 Save 15%
Supply in progress

One of product is no longer available. This pack cant be purchased

Pack description

SPECTRABULB X30 PACK

SpectraBULB X30 30W Pack + E27 Socket Clamp — BloomLED

Start your indoor grow with the simplest setup on the market: a SpectraBULB X30 30W full-spectrum horticultural LED bulb, bundled with a sturdy clamp featuring a high-temperature ceramic E27 socket. Screw the bulb in, attach the clamp, plug into the wall — your plants get effective horticultural lighting right away. Perfect for cuttings, mother plants, seedlings or as supplemental light inside a grow tent.

SpectraBULB X30 30W pack with E27 socket clamp BloomLED
SpecificationValue
True power30 W (full power, measured at the wall)
Light spectrumFull Spectrum 380–780 nm (growth + bloom)
BaseE27 universal standard
Coverage30 × 30 cm (boost) / 40 × 40 cm (gentle growth)
Voltage100–240 V AC — 50/60 Hz
Included clampJaws up to 50 mm + adjustable gooseneck + ceramic E27 socket
LifespanUp to 50,000 h
30WTrue power
FullLight spectrum
50k hLifespan
E27Universal base

Why choose this BloomLED pack

🌱 Plant-tuned full spectrum

The SpectraBULB X30 delivers a full visible spectrum (blue for vegetative growth, red for bloom, green for canopy penetration), tuned by BloomLED after 10+ years of real indoor grow trials.

🔌 Instant plug-and-grow

No ballast, no external driver, no electrical wiring needed: clamp → E27 socket → bulb → mains. Your horticultural lighting is up and running in under 2 minutes.

🔥 High-temperature ceramic socket

The clamp comes with a heat-resistant ceramic E27 socket built for continuous use inside a grow tent — a major step up from cheap plastic sockets.

🎯 Pinpoint positioning

The flexible gooseneck and 50 mm jaws let you mount the lamp on a shelf, pole or tent edge, then fine-tune the angle to keep light tight to the canopy.

🇫🇷 Designed in France, backed by BloomLED

Pack assembled and quality-checked by BloomLED, France-based experts in horticultural LED lighting for 10+ years. Product warranty, technical support and grow advice included.

What kind of grow is this pack best for?

The 30W pack is ideal for cuttings, seedlings, maintaining a mother plant or as supplemental light on a vegetative plant. It comfortably covers 30 × 30 cm in boost mode, up to 40 × 40 cm in gentle growth mode.

Do I need an extra ballast or driver?

No. The SpectraBULB X30 has all the electronics built in. Screw it into the included E27 socket on the clamp, plug into a 230V outlet, done. No extra hardware needed.

Where can I attach the clamp?

The jaws fit supports up to 50 mm thick: tent bars, shelves, uprights, desk edges. The adjustable gooseneck then lets you place the light exactly at the right distance from the canopy (15–30 cm recommended).

What distance should I keep between bulb and plants?

For the SpectraBULB X30 30W, plan 15–25 cm above a vegetative plant, 25–35 cm above delicate cuttings. Watch your plants for the first 48 hours and adjust if you notice bleaching or curled leaves.

All-in-one pack: horticultural LED bulb + clamp + ceramic socket. Everything you need to start an indoor grow with nothing else to buy.

✓ Designed in France✓ 10+ years experience✓ BloomLED warranty✓ Expert support

Pairs well with

SpectraBULB X30 Pack + 100cm E27 Cable · SpectraBULB X30 x2 Pack + E27 Cables · Complete 3x SpectraBULB X30 Pack

Pack content

The SpectraBULB X30 LED Horticultural Bulb is perfect for urban growers who want maximum yields on a minimum of area.

Growth and flowering in small spaces

Simple to use on an E27 socket
Ultra-powerful on small area
Growth & FLOWERING
100% horticultural spectrum
Small footprint Ø95x122mm

Features

  • Designed with an E27socket
  • Very long life 50.000H
  • Ultra-quiet fan
  • OSRAM LEDs
  • Max. growing area 50cm x 50cm
  • Optimized for growth and flowering

Benefits

  • Fullspectrum
  • Emits an intense light
  • Can be used alone or as a complement
  • High penetration rate in the canopy.
  • Very low cost of electricity consumption: 1€/month.

Ampoule horticole LED E27 SpectraBULB X30

The ultra-powerful LED horticultural bulb

led horticole osram culture interieur plantes croissance floraison
This SpectraBULB X30 is designed with the best components on the market. We use OSRAM LEDs, which, combined with 50° lenses, allow us to achieve a very high luminous flux at short, medium and long distances.

What are the advantages of the SpectraBULB X30 horticultural LED?

Ampoule horticole LED OSRAM
1 Very small size Ø95x122mm
2 Easy to use on standard E27 socket
3 Very high light output of 30W
4 Long distance performance
5 Ultra-quiet fan

If you want to use a LED horticultural bulb with white light, we recommend SpectraBULB X30 from our range GreenVisuaLED

Tips for using the SpectraBULB X30

Conseils utilisation ampoule horticole led pour plantes spectrabulb x30
1) SpectraBULB X30 LED horticultural bulb is to be screwed into an E27 socket
2) Place your bulb above your plant(s)
3) Leave a distance of 20 to 60cm between the top of the plants and the LED light bulb
4) Use a timer to leave the bulb on 18H/d for growth and 12H/d for flowering
5) Let nature take its course....
Lentille horticole led performante
High-end optics for high penetration
SpectraBULB X30 is a LED bulb with a total power consumption of 32W. This high performance bulb is coupled with 4 lenses of 50° which help guide the light flow to the plants.
Led multichips horticole ampoule culture plante
OSRAM horticultural LED
The SpectraBULB X30 is equipped with 16 OSRAM 2W LEDs for perfect spectrum mixing. Thanks to its 100% optimized spectrum, the bulb focuses all the light on the plant, which considerably reduces light wastage outside the horticultural area. Its intensity is sufficient for a 50cm square in the growing phase (60cm distance) and 40cm in the flowering phase (50cm distance). The SpectraBULB X30 LED horticultural bulb produces a deep red, blue and white spectrum to bring out the different pigments in your plants.
Dissipateur thermique pour led horticole
Designed for high performance heat dissipation
Unlike other solutions, LEDs do not generate intense heat and have a very small thermal footprint. The SpectraBULB X30 is equipped with a heat sink and an ultra-quiet fan for optimal heat dissipation.
Très simple ampoule horticole led e27
Easy installation and operation
This SpectraBULB X30 LED horticultural bulb can be used on any stand with a standard E27 socket.

Lighting area and features of this LED garden bulb

Superficie eclairage et caractéristiques ampoule horticole led SpectraBULB X30

Achieve optimal light positioning — Securely direct your E27 grow lights with this versatile clip-on holder, perfect for seedlings, clones, or supplementary lighting in any indoor grow setup.

Backed by BloomLED's 10+ years of horticultural LED expertise, ensuring quality and reliability for your plants.

E27 socket, 360° adjustable, 1.5m cable, built-in switch, max 60W.

New Arrival

Effortless Light Placement: BloomLED E27 Clip-On Lamp Holder

Revolutionize the way you illuminate your indoor garden with the BloomLED E27 Clip-On Lamp Holder. Designed for ultimate flexibility and ease of use, this accessory is a must-have for growers seeking precise light positioning without complex installations. From delicate seedlings to targeted supplemental lighting, achieve perfect coverage with a simple clip and adjust.

BloomLED E27 Clip-On Lamp Holder with Adjustable Swivel and Cable

Why Choose the BloomLED E27 Clip-On Lamp Holder?

In the dynamic world of indoor growing, adaptability is key. Our E27 Clip-On Lamp Holder provides an unparalleled solution for directing light exactly where your plants need it most. Forget fixed setups; this holder empowers you to optimize your plant's light exposure as they grow and mature, ensuring uniform development and robust health.

The robust spring clamp securely attaches to shelves, tent poles, or table edges (up to 55mm thick), while the 360° adjustable ball joint offers infinite positioning possibilities. Couple this with a convenient 1.5-meter cable and an integrated on/off switch, and you have a complete, ready-to-use lighting solution right out of the box.

Key Features for Superior Grow Light Control:

  • 360° Adjustable Swivel: Pinpoint light direction with precision. The robust ball joint allows for full rotation and tilt, ensuring every leaf gets its share of photons, crucial for even growth and preventing stretching.
  • Secure Spring Clamp (Max 55mm): Easily attach your grow light to almost any surface. This strong, non-slip clamp provides stability, giving you peace of mind that your lighting is secure, even in busy grow environments.
  • Integrated On/Off Switch & 1.5m Cable: Enjoy instant control and flexible placement. The convenient inline switch eliminates the need for external timers (though recommended for consistent cycles), while the generous cable length offers versatility for power access.

Technical Specifications:

FeatureDetail
Socket TypeE27
Adjustability360° Swivel Ball Joint
Clamp OpeningMax 55mm
Cable Length1.50m
Power SupplyEU Plug (Type F)
Voltage220-240V
Max Wattage60W
CertificationCE Certified
Warranty2 Years
BrandBloomLED

Optimized for Your Grow Space:

VersatilityPerfect for various grow stages
Ease of UsePlug & play installation
DurabilityRobust construction
SafetyCE certified

Whether you're starting seeds, nurturing clones, or providing supplementary light to specific areas of your canopy, this E27 Clip-On Lamp Holder offers the flexibility and reliability you need. Its compact design makes it ideal for propagation tents, small grow boxes, or integrating into larger grow rooms.

Pair it with your favorite E27 LED grow bulbs (sold separately) to create a custom lighting solution tailored to your plants' needs. The 60W max capacity ensures compatibility with a wide range of horticultural E27 lamps, from low-wattage propagation bulbs to more powerful full-spectrum options.

"The BloomLED E27 Clip-On Lamp Holder transformed my propagation setup. The adjustable swivel is a game-changer for directing light precisely where my seedlings need it most!" - A Satisfied BloomLED Customer

Frequently Asked Questions (FAQ):

  • Q: What types of E27 bulbs are compatible with this lamp holder?
    A: This lamp holder is compatible with all E27 base bulbs, including LED, CFL, and incandescent, as long as their wattage does not exceed 60W. For optimal plant growth, we recommend using horticultural-specific E27 LED grow bulbs.
  • Q: Can I use this lamp holder in a high-humidity grow tent?
    A: While the product is CE certified, like all electrical equipment, it should be protected from direct water splashes. For high-humidity environments, ensure proper ventilation and avoid direct contact with misting systems.

BloomLED: Your Trusted Partner in Horticultural Lighting

With over a decade of expertise in LED horticultural lighting, BloomLED is committed to providing growers with high-quality, reliable, and innovative solutions. Our products are designed by growers, for growers, ensuring they meet the real-world demands of indoor cultivation. This E27 Clip-On Lamp Holder is another testament to our dedication to helping you achieve exceptional harvests.

Enhance Your Grow Setup:

Consider these complementary products to complete your lighting solution:

6 other products in the same category: