- -5%
The perfect duo for a 60×60 tent or premium cloning area — Two plug-and-play full-spectrum SpectraB.2.G X45 60cm LED bars.
Designed in France by BloomLED, horticultural LED lighting expert for over 10 years.
2 × 45W · Full spectrum 380-780nm · Samsung LM301B + Osram 660nm · Dimmable · IP65
This BloomLED pack pairs two SpectraB.2.G X45 full-spectrum LED grow bars engineered to cover a 60×60 cm grow tent or a premium cloning area with uniform light. Each bar delivers 45 W using Samsung LM301B and Osram Oslon 660 nm diodes, for an efficacy close to 2.7 µmol/J and a color rendering tuned to every stage of your cultivation cycle. Dimmable, IP65 and fully Plug & Play, these bars are ideal for growers chasing power, reliability and precision.
| Specification | Value |
|---|---|
| Bars included | 2 × SpectraB.2.G X45 60cm |
| Total power | 90 W (2 × 45 W) |
| Spectrum | Full 380-780 nm + IR 660 nm |
| LEDs | Samsung LM301B + Osram Oslon |
| Efficacy | ≈ 2.7 µmol/J |
| Combined PPF | ≈ 240 µmol/s |
| Coverage | 60×60 cm (flower) · 80×80 cm (veg) |
| Dimmable | Yes, 0-100% |
| IP rating | IP65 |
| Power supply | 230 V AC, EU plug included |
| Bar dimensions | 600 × 40 × 35 mm |
| Warranty | 3-year BloomLED cover |
Samsung LM301B diodes cover the entire photosynthetic range while Osram Oslon 660 nm diodes boost flowering. The pack mimics natural sunlight to drive photosynthesis at every cultivation stage.
Nearly 240 µmol/s for only 90 W consumed — one of the best PAR efficiencies on the market, saving meaningful energy versus HPS or CMH setups.
A built-in dimmer lets you fine-tune intensity at every stage: 20% for clones, 60% for veg, 100% for flower. Dial in your DLI with µmol precision.
IP65-certified bars shrug off splashes and the humidity of a real grow tent. Built to survive the conditions of genuine indoor horticulture.
Power cables and daisy-chain connectors included. Mounting brackets and adjustable rope hangers in the box — installation done in under 10 minutes.
BloomLED has been engineering SpectraB.2.G bars in France for over a decade. Every pack is tested and validated before shipping from our EU warehouse.
Yes — that's the recommended format. In flower, both SpectraB.2.G X45 60cm bars deliver around 650-700 µmol/m²/s PPFD at 30 cm from canopy, hitting the sweet spot for a 60×60 tent. For an 80×80 cm tent in veg or cloning, the pack also performs well.
Can I start with one bar and add the second later?Absolutely. Each bar has its own driver and can be powered independently. Begin with a single bar during cloning or veg, then bring in the second one for flowering to maximize yield.
Does this spectrum suit every phase (clone, veg, flower)?Yes. The full 380-780 nm spectrum includes all critical wavelengths: 450 nm (veg), 660 nm (flower, Emerson effect), moderate UV-A and far-red to tighten buds. It's a true full-cycle spectrum.
How high should I hang the bars above the canopy?Clones / seedlings: 40-50 cm at 30%. Veg: 30-40 cm at 60%. Flower: 20-30 cm at 100%. The dimmer prevents light stress in the first days after transplant.
What timer and power setup works with this pack?A standard 230 V EU socket is all you need. Plug both bars into a mechanical or digital timer (18/6 for veg, 12/12 for flower). Pair with a E27 cable with switch if you add supplementary bulbs.
A pack built for growers ready to level up: the modularity of two bars, the reliability of a pro spectrum, the efficiency of French BloomLED engineering. Never settle between power and efficacy again.