- New
2.25 m² floor area, 2.20 m of headroom — The Homebox Ambient AQ 150+ grow tent hosts your most demanding indoor setups, with a high-reflectivity PAR+ liner and a 22 mm steel frame rated for 75 kg of equipment.
Engineered for serious growers, curated by BloomLED, the French horticultural LED lighting specialist for over 10 years.
150×150×220 cm · PAR+ liner · 75 kg max load · HID/LED 1000 W compatible
Free delivery
Take advantage of free home delivery in France from 100 € of purchase
Secure payment
Pay securely and pay by credit card in installments from €100 to €3,000
Secure parcels
The boxes we ship are all of high quality
Customer service
Contact us via chat, phone, email, Facebook, Instagram and TikTok
With 2.25 m² of usable floor and 2.20 m of headroom, the Homebox Ambient AQ 150+ is built for indoor growers who refuse to compromise. Its exclusive PAR+ interior liner maximises photosynthetically active light, while the reinforced 22 mm steel frame carries up to 75 kg of gear (LED panels, carbon filter, inline fan, SCROG netting). A flagship pick for high-output setups — selected and distributed by BloomLED, the French horticultural LED lighting specialist for over 10 years.
| Specification | Value |
|---|---|
| External dimensions | 150 × 150 × 220 cm |
| Usable floor area | 2.25 m² |
| Interior height | 220 cm |
| Metal frame | 22 mm steel poles with reinforced plastic connectors |
| Maximum load capacity | 75 kg |
| Interior liner | PAR+ high reflectivity, low heat transfer |
| Outer fabric | Oxford 600D, tear- and dirt-resistant |
| Passive ventilation | 2× Ø100 mm, 2× Ø200 mm, 2× Ø250 mm, 1× Ø300 mm |
| OmniFlow Airvents | 2 directional vents Ø250 mm |
| Light tightness | Full blackout zippers |
| Insect protection | 700 µm micro-mesh on all openings |
| Floor tray | Removable, waterproof, washable |
| Lighting compatibility | HID up to 1000 W or equivalent high-output LED |
| Weight | ~25 kg (empty) |
The Homebox "+" range raises the standard 200 cm height to 220 cm. You gain 20 critical centimetres to hang your light at the right distance, install a SCROG net, or grow tall vertical strains without compromise.
The PAR+ interior fabric reflects maximum photosynthetically active radiation back to your plants while limiting heat build-up. Result: every watt from your lamp works on growth and bloom, not on heating the air.
Reinforced steel poles and thick plastic connectors let you safely hang a high-power LED, carbon filter, inline fan and your full gear list. No sagging, even with a complete setup.
Two OmniFlow Airvents Ø250 mm create a directional airflow that eliminates hot spots. Combined with the 7 passive vents (Ø100 to Ø300 mm), you can configure intake and exhaust to match any extractor without DIY hacks.
Blackout zippers, 700 µm insect mesh and a waterproof floor tray deliver a fully controlled environment: zero light leaks, zero pests, zero odour escape. Essential for respecting photoperiods during flowering.
Distributed and supported by BloomLED, a French growshop specialised in horticultural LED lighting for over 10 years. Get free technical advice to size your installation (lamp, fan, carbon filter).
The choice of demanding growers. For high-yield indoor cultivation of 4 to 9 plants with vertical headroom, the Homebox AQ 150+ combines floor area, height, structural strength and premium finish — no compromise.
Assembly takes 20 to 30 minutes, tool-free, thanks to Homebox''s snap connectors. Stagger the ventilation ports (low intake, high exhaust) to create a slight negative pressure: this is the key to efficient air renewal and zero odour leaks.
To fully exploit the 2.25 m² of the AQ 150+, we recommend a 600 to 800 W horticultural LED (equivalent to 1000 W HPS) with full spectrum for vegetative and flowering stages. For extraction, pair a Ø200 mm inline fan (400-450 m³/h) with a matching carbon filter for full air renewal every 1 to 3 minutes. Target 20 to 25 °C and 50 to 70 % relative humidity.
Maintenance is straightforward: clean the removable waterproof tray between every cycle to prevent fungal disease. Periodically check the blackout zippers — they are the critical point for light-tightness.
To fully exploit 2.25 m² in flowering, plan 600 to 800 W of high-efficiency horticultural LED (≥ 2.7 µmol/J). That delivers an average PPFD of 600 to 900 µmol/m²/s at 40 cm from canopy — the sweet spot for high yields. During veg, you can dim to 400-500 W. BloomLED can recommend the right fixture for your setup.
Which extractor and carbon filter should I plan?Internal volume: 150 × 150 × 220 cm = roughly 4.95 m³. For air renewal every 1 to 2 minutes, pick a 350 to 450 m³/h inline fan in Ø200 mm. Pair it with a matching carbon filter to neutralise odours. The AQ 150+ has two Ø200 mm openings specifically sized for this configuration.
How many plants fit in the AQ 150+?In standard cultivation, 4 to 6 plants in large pots (15-25 L) fit comfortably. In SOG (sea of green) with small pots, you can run 9-16 plants. In SCROG, 2 to 4 plants can fill the netting stretched at around 80 cm above the floor.
Is the AQ 150+ compatible with a 1000 W HPS lamp?Yes, the structure and 220 cm of headroom accommodate a 1000 W HPS with a cooltube or air-cooled reflector. That said, we recommend a modern horticultural LED (600-800 W) instead: better energy efficiency, less heat, and a customisable full spectrum.
What is the difference with the AQ 120+ or the standard Q150?The "AQ +" range provides 220 cm of headroom (vs 200 cm for standard models) — precious for hanging your lamp and growing tall plants. Compared with the AQ 120+ (1.44 m²), the AQ 150+ offers 56 % more surface, ideal for scaling up. The PAR+ liner and OmniFlow Airvents are shared across the Ambient range.