- -5%
The all-in-one kit to start growing from day one — SpectraB.2.G X45 45W full spectrum LED, reinforced Probox 60×60×160 cm tent and 125 mm 190 m³/h extractor with 3 m ducting: everything is ready, you only need your plants.
Confidence: curated by BloomLED's expertise, designed in France by a specialist in horticultural LED lighting for over 10 years.
Footprint 0.36 m² · 45 W full spectrum LED · 190 m³/h extraction · 20 min setup
Free delivery
Take advantage of free home delivery in France from 100 € of purchase
Secure payment
Pay securely and pay by credit card in installments from €100 to €3,000
Secure parcels
The boxes we ship are all of high quality
Customer service
Contact us via chat, phone, email, Facebook, Instagram and TikTok
Designed by BloomLED for growers who want an equipment that is ready to produce without spending hours comparing components, this pack brings together the three pillars of a successful 60×60 cm indoor grow: a full-spectrum horticultural LED light that covers vegetative and flowering stages, an insulated rigid grow tent, and a ventilation kit sized for your volume. Open the box, assemble the tent in 20 minutes, plug in, grow. The sizing is validated by our test growers: LED, tent and extraction work together with no overheating, no dark spot in the lighting pattern and no airflow backflow — unlike an improvised assembly that often forces you to replace a component after a few weeks.
| Item | Specifications |
|---|---|
| SpectraB.2.G X45 60 cm LED | 45 W full spectrum, Samsung diodes, dimmable, hanging ropes included |
| Probox 60 grow tent | 60 × 60 × 160 cm, 600 D canvas, 95% reflective Mylar interior |
| 125 mm inline extractor fan | Airflow 190 m³/h, 230 V mains, low noise operation |
| Flexible aluminium ducting | Length 3 m, diameter 125 mm, heat resistant |
| Fixings | 2 × 125 mm stainless steel hose clamps |
The SpectraB.2.G X45 embeds a complete veg + bloom spectrum with the deep-red peak essential to bud formation. No more bulb swaps between cycles: the same lamp guides your plants from cloning to harvest.
The Probox 60 is built from 600 D canvas with reinforced zips and a 95% reflective interior lining. No light leaks, no escaping odours, your cycles stay under control even in a shared apartment.
190 m³/h for a 0.216 m³ tent means one full air exchange every 40 seconds. Heat generated by the LED is removed continuously, humidity stays stable, your plants breathe like in the open.
Clip-together frame, lamp hung from adjustable ropes, extractor clamped to the ducting with the fixings provided. A Phillips screwdriver is all you need — no electrical skill required.
LED rated at 50,000 hours, metal-reinforced tent frame, long-life brushless extractor motor. Invest once, grow for years.
Designed in France by a team of horticultural lighting specialists, this pack is tested in-house in our own grow rooms before it reaches you. Multilingual support included.
To take full advantage of the pack from the first cycle, we recommend the following settings: hang the LED between 25 and 35 cm above the canopy during vegetative growth, then gradually lower it to 20-25 cm in flowering. Run the ventilation continuously at around 80% during lights-on, then drop to 40-50% during the dark period to preserve a natural thermal delta. Place a small oscillating fan inside the tent (not included) to strengthen the stems through gentle mechanical stress and avoid any stagnant air pocket that would favour mould.
This pack suits both the beginner who wants to start without sizing mistakes and the experienced grower looking for a second tent to isolate a phase or a particular strain. The 60 × 60 cm footprint comfortably hosts 2 to 4 plants in 7 to 11 litre pots, depending on the training method of choice (SoG, ScrOG, LST).
Yes, that is our primary audience. Every component is chosen to be easy to install and use: the tent assembles without heavy tooling, the LED hangs in a few minutes, the extractor plugs directly into the mains. We also supply a detailed quick-start guide and our BloomLED support team answers every technical question in French or English.
How many plants fit in a 0.36 m² footprint?Count on 2 to 4 plants on average, depending on pot size and growing method. In SoG (Sea of Green) with 3 to 5 litre pots you can fit up to 6 tight plants. In ScrOG with a single plant trained flat, you exploit the full footprint with maximum yield. Our customers typically report 60 to 120 g of dry flower per cycle.
Are 45 W of LED enough for flowering?Yes. The SpectraB.2.G X45 delivers around 300 µmol/s of PPF over the tent footprint, i.e. an average PPFD of 650 to 800 µmol/m²/s at 30 cm hanging height — the sweet spot for flowering. The low electrical draw (45 W) hides a very high photon density thanks to high-efficiency Samsung diodes.
Does the ventilation kit remove enough heat?Absolutely. The 125 mm 190 m³/h extractor turns over the tent air more than once per minute, keeping the tent only 4 to 6 °C above room temperature. Under normal conditions (22 °C room), you stay between 26 and 28 °C inside the tent — the comfort zone for most cultivars.
Is the tent light- and odour-proof?The 600 D canvas and double-lip zips block any light leakage, essential for respecting photoperiods. For odours, the pack is designed to host a carbon filter (not included, to be chosen to your specific needs) that mounts at the extractor output via the provided 125 mm ducting.
The pack we recommend first to new indoor growers. Everything is sized together, everything is compatible, nothing extra is needed to start. Plug in, plant, harvest.